Tag Archives: mini air compressor

China Custom High Pressure Piston Diesel Air Compressor for Firefighting Scba Breathe Equipment mini air compressor

Product Description

Our company is a professional high-pressure gas compressor solution provider, which can meet the needs of different customers. As for the high-end demand in the field of medium and high-pressure compressors, and can provides users with customized products and high-quality services.
 

working principle

This product is mass-produced after design changes and optimizations in accordance with the Italian model. The final piston adopts a special process, and the piston ring adopts the Japanese Riken process. Unanimous praise from users. This product adopts three-cylinder three-stage compression, splash lubrication, inter-stage safety valve and filter system. HC-W400 can provide safe compressed air for any industry that requires high-pressure pure air source, and provide safe compressed air that meets the requirements of human breathing. This product is designed, produced and tested and accepted in accordance with the requirements of GB/T 12929-2008 “Marine High Pressure Piston Air Compressor”; the air quality complies with EN12571 international breathing compressor breathing standard; HC-W400 is a kind of air compression equipment, it will be free 1 kg (1bar/0.1Mpa) of air in the state is compressed to a high pressure gas of 300 kg (300bar/30Mpa) gauge pressure step by step. After the air flows through the separator and filter in the unit, it is removed from the The oil and impurities in the high-pressure air can filter the inhaled air containing fine particulate matter (PM2.5) to a safety value of less than 10 micrograms, which meets the standards set by the World Health Organization, making the exhaust gas clean and tasteless. The personnel provide highly purified, clean, odorless, safe and reliable compressed breathing air.

Main parameters
1.Model: HC-W400Z(PLC Control System)
2.Work pressure: 30Mpa  Mpa(300bar)
3. Displacement (inhalation state): 400L/min  L/min
4.Type:W-type layout-3-cylinder three-stage reciprocating piston compression
5.Drive:Electric 380V/50Hz/7.5kw
6. Lubrication method:Splash lubrication (food grade lubricant 750-H2)
7. Cooling method:Air-cooled
8.Control mode:Automatic start and stop, automatic sewage discharge, temperature control system, phase sequence protection function, emergency stop function, low noise,Low temperature, low speed, touch screen
9.Clean air:1 air filtration, 2 oil-water separation, 2 grade classification air purification
10.Safety devices: Interval safety valve, pressure maintaining valve, automatic shutdown system, box-type protective cover
11. Packing size (length×width×height): 76×110×140cm
12. Weight: 290kg
13.Inflation speed:6 liter bottle filled with 30Mpa about 5.5 minutes
14. Certified product: CE certification, MA test report
 15.Packing List:Instruction manual, safety inspection report certificate, 2 sets of inflation hoses and joints, and the machine has built-in food grade lubricants slip.

Product composition and characteristics

The machine is equipped with an automatic shutdown device, the shutdown pressure can be set freely, and it is equipped with a time running timer to support the maintenance time;
2 gas cylinders can be filled at the same time; (1 bottle is recommended, the charging speed is faster)
High-power all-copper core wire customized motor, stable power output, light starting load;
The protective cover adopts plastic spraying process, which is not easy to scratch and rust; (some manufacturers use spray paint, which is low cost and easy to fall off and rust)
Super strong triangle belt, strong tension, and wear-resisting and high-temperature resistance;
Shockproof pressure gauge 0~5800psi/400bar, accurate pressure value;
The reinforced steel plate base is equipped with anti-vibration pads, so the equipment runs more smoothly;
High-strength nylon cooling fan, better heat dissipation effect;
The low pressure adopts red copper tube, which has better heat dissipation performance, and the high pressure adopts stainless steel tube to ensure the safety of output pressure;
The rotating parts are equipped with protective cover devices, and safety valves and automatic shutdown systems are installed at all levels to ensure the safety of operators; motor drive or gasoline engine drive can be selected to meet the air supply requirements under various conditions;
Configure precision air filter (customized wire mesh filter element);

2-stage oil-water separator (standard with manual blowdown, optional automatic blowdown) Final classification air purification system (standard with manual blowdown, optional automatic blowdown) Two-stage purification, first deodorizes water, then deodorizes; (most manufacturers Adopt 1 level mixed filtration to save production cost)
The last stage adopts the piston ring process, and only the piston ring needs to be replaced if worn; (most manufacturers do not use the last stage piston ring process, after the wear, a complete set of pistons and cylinders need to be replaced, and expensive accessories are required)
The end uses a pressure maintenance valve, deep air filtration, and prolongs the life of the filter element, and uses an alloy aluminum permanent filter element, replaceable filter element material, saving later use costs; (some manufacturers have no pressure maintenance valve and use disposable filtration Core, save production cost, increase later use cost)
The parts in contact with gas, such as cylinders and filter cartridges, are cleaned with alcohol before leaving the factory, and tested with food-grade lubricating oil, and they are all debugged before leaving the factory.

Main application
            Diving bresthing                                                                  Fire Bresthing

Fire breathing application: Equipped in the gas supply stations of the fire brigade or various fire-fighting vehicles, it provides emergency gas supply at the scene of a fire or in the rescue and relief process, so that the majority of firefighters will be exposed to various environments such as dense smoke, poisonous gas, steam or oxygen deficiency. Breathing high-purity, clean, odorless, safe and reliable compressed air ensures that fire extinguishers can safely and effectively carry out fire fighting, rescue, disaster relief, and rescue.
Diving breathing application: Diving clubs, diving enthusiasts, marine breeding, marine rescue, shipboard equipment, underground operations, fishery fishing, aquaculture, sunken object salvage, underwater engineering, water parks, shipbuilding and other industries, providing divers with high purification, clean and tasteless , Safe and reliable compressed breathing air. In an environment that cannot meet the requirements of the human body for normal breathing, the air is filled into a high-pressure gas cylinder for human breathing.

Product display

                       

If you want us to provide you with detailed technical design and quotation, please provide the following technical parameters, and we will reply to your email or phone within 24 hours.

1.Flow: _____ Nm3 / hour

2.Pressure: _____Bar(MPa)

3. How many cylinders to fill

4. Whether it needs to be filled every day

                         

Application: Back Pressure Type, Intermediate Back Pressure Type, High Back Pressure Type, Low Back Pressure Type
Performance: Low Noise, Variable Frequency, Explosion-Proof
Mute: Mute
Lubrication Style: Oil-free
Drive Mode: Electric
Configuration: Portable
Customization:
Available

|

air compressor

What role do air dryers play in compressed air systems?

Air dryers play a crucial role in compressed air systems by removing moisture and contaminants from the compressed air. Compressed air, when generated, contains water vapor from the ambient air, which can condense and cause issues in the system and end-use applications. Here’s an overview of the role air dryers play in compressed air systems:

1. Moisture Removal:

Air dryers are primarily responsible for removing moisture from the compressed air. Moisture in compressed air can lead to problems such as corrosion in the system, damage to pneumatic tools and equipment, and compromised product quality in manufacturing processes. Air dryers utilize various techniques, such as refrigeration, adsorption, or membrane separation, to reduce the dew point of the compressed air and eliminate moisture.

2. Contaminant Removal:

In addition to moisture, compressed air can also contain contaminants like oil, dirt, and particles. Air dryers help in removing these contaminants to ensure clean and high-quality compressed air. Depending on the type of air dryer, additional filtration mechanisms may be incorporated to enhance the removal of oil, particulates, and other impurities from the compressed air stream.

3. Protection of Equipment and Processes:

By removing moisture and contaminants, air dryers help protect the downstream equipment and processes that rely on compressed air. Moisture and contaminants can negatively impact the performance, reliability, and lifespan of pneumatic tools, machinery, and instrumentation. Air dryers ensure that the compressed air supplied to these components is clean, dry, and free from harmful substances, minimizing the risk of damage and operational issues.

4. Improved Productivity and Efficiency:

Utilizing air dryers in compressed air systems can lead to improved productivity and efficiency. Dry and clean compressed air reduces the likelihood of equipment failures, downtime, and maintenance requirements. It also prevents issues such as clogging of air lines, malfunctioning of pneumatic components, and inconsistent performance of processes. By maintaining the quality of compressed air, air dryers contribute to uninterrupted operations, optimized productivity, and cost savings.

5. Compliance with Standards and Specifications:

Many industries and applications have specific standards and specifications for the quality of compressed air. Air dryers play a vital role in meeting these requirements by ensuring that the compressed air meets the desired quality standards. This is particularly important in industries such as food and beverage, pharmaceuticals, electronics, and automotive, where clean and dry compressed air is essential for product integrity, safety, and regulatory compliance.

By incorporating air dryers into compressed air systems, users can effectively control moisture and contaminants, protect equipment and processes, enhance productivity, and meet the necessary quality standards for their specific applications.

air compressor

What is the role of air compressors in manufacturing and industrial processes?

Air compressors play a crucial role in various manufacturing and industrial processes, providing a reliable source of compressed air that powers a wide range of equipment and tools. Here are some key roles of air compressors in manufacturing and industrial settings:

1. Pneumatic Tools and Equipment:

Air compressors power a wide range of pneumatic tools and equipment used in manufacturing processes. These tools include impact wrenches, air drills, sanders, grinders, nail guns, and spray guns. Compressed air provides the necessary force and energy for these tools, enabling efficient and precise operations.

2. Automation and Control Systems:

Compressed air is used in automation and control systems within manufacturing facilities. Pneumatic actuators and valves use compressed air to control the movement of machinery and components. These systems are widely used in assembly lines, packaging operations, and material handling processes.

3. Air Blowing and Cleaning:

Compressed air is employed for blowing and cleaning applications in manufacturing and industrial processes. Air blowguns and air nozzles are used to remove debris, dust, and contaminants from surfaces, machinery, and products. Compressed air is also used for drying, cooling, and purging operations.

4. Air Separation and Gas Generation:

Air compressors are used in air separation plants to generate industrial gases such as nitrogen, oxygen, and argon. These gases are essential for various industrial processes, including metal fabrication, chemical production, and food packaging.

5. HVAC Systems:

Compressed air is utilized in heating, ventilation, and air conditioning (HVAC) systems. It powers pneumatic actuators for damper control, pneumatic controls for pressure regulation, and pneumatic valves for flow control in HVAC applications.

6. Air Compression for Storage and Transport:

Compressed air is used for storage and transport purposes in manufacturing and industrial settings. It is often used to pressurize storage tanks or containers that hold gases or liquids. Compressed air also facilitates the transfer of materials through pipelines and pneumatic conveying systems.

7. Process Instrumentation:

Compressed air is utilized in process instrumentation and control systems. It powers pneumatic instruments such as pressure gauges, flow meters, and control valves. These instruments play a critical role in monitoring and regulating various parameters in industrial processes.

8. Material Handling and Pneumatic Conveying:

In manufacturing and industrial facilities, compressed air is used for material handling and pneumatic conveying systems. It enables the movement of bulk materials such as powders, granules, and pellets through pipelines, facilitating efficient and controlled material transfer.

Overall, air compressors are vital components in manufacturing and industrial processes, providing a versatile and efficient source of power for a wide range of applications. The specific role of air compressors may vary depending on the industry, process requirements, and operational needs.

air compressor

What is the role of air compressor tanks?

Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions:

1. Storage and Pressure Regulation: The primary role of an air compressor tank is to store compressed air. As the compressor pumps air into the tank, it accumulates and pressurizes the air. The tank acts as a reservoir, allowing the compressor to operate intermittently while providing a steady supply of compressed air during periods of high demand. It helps regulate and stabilize the pressure in the system, reducing pressure fluctuations and ensuring a consistent supply of air.

2. Condensation and Moisture Separation: Compressed air contains moisture, which can condense as the air cools down inside the tank. Air compressor tanks are equipped with moisture separators or drain valves to collect and remove this condensed moisture. The tank provides a space for the moisture to settle, allowing it to be drained out periodically. This helps prevent moisture-related issues such as corrosion, contamination, and damage to downstream equipment.

3. Heat Dissipation: During compression, air temperature increases. The air compressor tank provides a larger surface area for the compressed air to cool down and dissipate heat. This helps prevent overheating of the compressor and ensures efficient operation.

4. Pressure Surge Mitigation: Air compressor tanks act as buffers to absorb pressure surges or pulsations that may occur during compressor operation. These surges can be caused by variations in demand, sudden changes in airflow, or the cyclic nature of reciprocating compressors. The tank absorbs these pressure fluctuations, reducing stress on the compressor and other components, and providing a more stable and consistent supply of compressed air.

5. Energy Efficiency: Air compressor tanks contribute to energy efficiency by reducing the need for the compressor to run continuously. The compressor can fill the tank during periods of low demand and then shut off when the desired pressure is reached. This allows the compressor to operate in shorter cycles, reducing energy consumption and minimizing wear and tear on the compressor motor.

6. Emergency Air Supply: In the event of a power outage or compressor failure, the stored compressed air in the tank can serve as an emergency air supply. This can provide temporary air for critical operations, allowing time for maintenance or repairs to be carried out without disrupting the overall workflow.

Overall, air compressor tanks provide storage, pressure regulation, moisture separation, heat dissipation, pressure surge mitigation, energy efficiency, and emergency backup capabilities. They are vital components that enhance the performance, reliability, and longevity of air compressor systems in various industrial, commercial, and personal applications.

China Custom High Pressure Piston Diesel Air Compressor for Firefighting Scba Breathe Equipment   mini air compressorChina Custom High Pressure Piston Diesel Air Compressor for Firefighting Scba Breathe Equipment   mini air compressor
editor by CX 2023-10-09

China Hot selling 30bar 40bar 6.0m3/Min Oil-Free Screw Type Air Compressor for Pet Bottle Blowing Industry mini air compressor

Product Description

2~40bar DIRECT-DRIVE WATER-INJECTED OIL-FREE SCREW AIR COMPRESSOR (PM VSD)
 

1. Low temperature means more efficiency
With an exceptionally low running temperature of less than 60ºC, near isothermal compression is achieved. 
The superior cooling capability of water removes the heat and gives more air per kW of power.
This also eliminates the need for an internal cooler and aftercooler, the associated power consumption reduces pressure drop to a minimum.

2. Cutting the maintenance cost
Spare parts only need air filter elements and water filter elements
Low operating temperature ensures the long service life of the screw air end, avoiding expensive maintenance costs for the screw rotor.
Low temperature reduces the stress on other components ensuring long life.

3. Avoiding the costs of extra energy to combat pressure drop
These costs, although not apparent at the time of purchase, are very high and contribute substantially to the total cost of ownership.

4. No Gearbox No need for associated oil lubrication.

5. Simple structure 
Fewer moving parts than the dry oil-free screw air compressor, meaning there is less to go wrong, 
while balance bearing loads extend the compression element service life for low-cost operation. 

 

Product Parameters

 

 

Product Description

 

Company Profile

 

 

Hot Sale Products

 

 

 

           2~10bar Oil-injected                        7~16bar All-in-1                       Small Single-phase
       Screw Air Compressor                   Screw Air Compressor                 Screw Air Compressor  

 

         2~40bar 100% Oil-free                   8~12bar 100% Oil-free                Diesel Engine Portable
       Screw Air Compressor                   Scroll Air Compressor                 Screw Air Compressor  

 

 

Main Product

 

What we can supply:

* Oil-injected Screw Air Compressor (2~16 bar)
* All-in-1 Screw Air Compressor with Tank, Dryer, and Filters (7~16 bar)
* Single-phase Small Screw Air Compressor for Home use (8~10 bar)
* Water-injected Oil-free Screw Air Compressor (2~40 bar)
* Oil-free Scroll Air Compressor (8~12 bar)
* Diesel&Electric Engine Portable Screw Air Compressor (8~30 bar)
* Air Dryer, Air tank, Filters, and other Spare parts

 

After-sales Service: 24*7 Online Services and Video Guide
Warranty: 1 Year for The Whole Machine & 2 Years for Air End
Lubrication Style: Oil-free
Cooling System: Air Cooling
Power Source: AC Power
Installation Type: Stationary Type
Customization:
Available

|

air compressor

Can air compressors be used for painting and sandblasting?

Yes, air compressors can be used for both painting and sandblasting applications. Here’s a closer look at how air compressors are utilized for painting and sandblasting:

Painting:

Air compressors are commonly used in painting processes, especially in automotive, industrial, and construction applications. Here’s how they are involved:

  • Spray Guns: Air compressors power spray guns used for applying paint coatings. The compressed air atomizes the paint, creating a fine mist that can be evenly sprayed onto surfaces. The pressure and volume of the compressed air impact the spray pattern, coverage, and overall finish quality.
  • Paint Mixers and Agitators: Compressed air is often used to power mixers and agitators that ensure proper blending of paint components. These devices use the compressed air to stir or circulate the paint, preventing settling and maintaining a consistent mixture.
  • Airbrushing: Air compressors are essential for airbrushing techniques, which require precise control over airflow and pressure. Airbrushes are commonly used in artistic applications, such as illustrations, murals, and fine detailing work.

Sandblasting:

Air compressors play a crucial role in sandblasting operations, which involve propelling abrasive materials at high velocity to clean, etch, or prepare surfaces. Here’s how air compressors are used in sandblasting:

  • Blasting Cabinets: Air compressors power blasting cabinets or booths, which are enclosed spaces where the sandblasting process takes place. The compressed air propels the abrasive media, such as sand or grit, through a nozzle or gun, creating a forceful stream that impacts the surface being treated.
  • Abrasive Blasting Pots: Air compressors supply air to abrasive blasting pots or tanks that store and pressurize the abrasive media. The compressed air from the compressor enters the pot, pressurizing it and allowing for a controlled release of the abrasive material during the sandblasting process.
  • Air Dryers and Filters: In sandblasting applications, it is crucial to have clean, dry air to prevent moisture and contaminants from affecting the abrasive blasting process and the quality of the surface being treated. Air compressors may be equipped with air dryers and filters to remove moisture, oil, and impurities from the compressed air.

When using air compressors for painting or sandblasting, it is important to consider factors such as the compressor’s pressure and volume output, the specific requirements of the application, and the type of tools or equipment being used. Consult the manufacturer’s guidelines and recommendations to ensure the air compressor is suitable for the intended painting or sandblasting tasks.

Proper safety measures, such as wearing protective gear and following established protocols, should always be followed when working with air compressors for painting and sandblasting applications.

air compressor

Can air compressors be used for medical and dental applications?

Yes, air compressors can be used for various medical and dental applications. Compressed air is a reliable and versatile utility in healthcare settings, providing power for numerous devices and procedures. Here are some common applications of air compressors in medical and dental fields:

1. Dental Tools:

Air compressors power a wide range of dental tools and equipment, such as dental handpieces, air syringes, air scalers, and air abrasion devices. These tools rely on compressed air to generate the necessary force and airflow for effective dental procedures.

2. Medical Devices:

Compressed air is used in various medical devices and equipment. For example, ventilators and anesthesia machines utilize compressed air to deliver oxygen and other gases to patients. Nebulizers, used for respiratory treatments, also rely on compressed air to convert liquid medications into a fine mist for inhalation.

3. Laboratory Applications:

Air compressors are used in medical and dental laboratories for various purposes. They power laboratory instruments, such as air-driven centrifuges and sample preparation equipment. Compressed air is also used for pneumatic controls and automation systems in lab equipment.

4. Surgical Tools:

In surgical settings, compressed air is employed to power specialized surgical tools. High-speed air-driven surgical drills, saws, and bone-cutting instruments are commonly used in orthopedic and maxillofacial procedures. Compressed air ensures precise control and efficiency during surgical interventions.

5. Sterilization and Autoclaves:

Compressed air is essential for operating sterilization equipment and autoclaves. Autoclaves use steam generated by compressed air to sterilize medical instruments, equipment, and supplies. The pressurized steam provides effective disinfection and ensures compliance with rigorous hygiene standards.

6. Dental Air Compressors:

Specialized dental air compressors are designed specifically for dental applications. These compressors have features such as moisture separators, filters, and noise reduction mechanisms to meet the specific requirements of dental practices.

7. Air Quality Standards:

In medical and dental applications, maintaining air quality is crucial. Compressed air used in healthcare settings must meet specific purity standards. This often requires the use of air treatment systems, such as filters, dryers, and condensate management, to ensure the removal of contaminants and moisture.

8. Compliance and Regulations:

Medical and dental facilities must comply with applicable regulations and guidelines regarding the use of compressed air. These regulations may include requirements for air quality, maintenance and testing procedures, and documentation of system performance.

It is important to note that medical and dental applications have specific requirements and standards. Therefore, it is essential to choose air compressors and associated equipment that meet the necessary specifications and comply with industry regulations.

air compressor

What maintenance is required for air compressors?

Maintaining air compressors is essential to ensure their optimal performance, longevity, and safe operation. Regular maintenance helps prevent breakdowns, improves efficiency, and reduces the risk of accidents. Here are some key maintenance tasks for air compressors:

1. Regular Inspection: Perform visual inspections of the air compressor to identify any signs of wear, damage, or leaks. Inspect the compressor, hoses, fittings, and connections for any abnormalities. Pay attention to oil leaks, loose bolts, and worn-out components.

2. Oil Changes: If your air compressor has an oil lubrication system, regular oil changes are crucial. Follow the manufacturer’s recommendations for the frequency of oil changes and use the recommended oil type. Dirty or degraded oil can impact compressor performance and lead to premature wear.

3. Air Filter Cleaning or Replacement: Clean or replace the air filter regularly to ensure proper air intake and prevent contaminants from entering the compressor. Clogged or dirty filters can restrict airflow and reduce efficiency.

4. Drain Moisture: Air compressors produce moisture as a byproduct of the compression process. Accumulated moisture in the tank can lead to rust and corrosion. Drain the moisture regularly from the tank to prevent damage. Some compressors have automatic drains, while others require manual draining.

5. Belt Inspection and Adjustment: If your compressor has a belt-driven system, inspect the belts for signs of wear, cracks, or tension issues. Adjust or replace the belts as necessary to maintain proper tension and power transmission.

6. Tank Inspection: Inspect the compressor tank for any signs of corrosion, dents, or structural issues. A damaged tank can be hazardous and should be repaired or replaced promptly.

7. Valve Maintenance: Check the safety valves, pressure relief valves, and other valves regularly to ensure they are functioning correctly. Test the valves periodically to verify their proper operation.

8. Motor and Electrical Components: Inspect the motor and electrical components for any signs of damage or overheating. Check electrical connections for tightness and ensure proper grounding.

9. Keep the Area Clean: Maintain a clean and debris-free area around the compressor. Remove any dirt, dust, or obstructions that can hinder the compressor’s performance or cause overheating.

10. Follow Manufacturer’s Guidelines: Always refer to the manufacturer’s manual for specific maintenance instructions and recommended service intervals for your air compressor model. They provide valuable information on maintenance tasks, lubrication requirements, and safety precautions.

Regular maintenance is vital to keep your air compressor in optimal condition and extend its lifespan. It’s also important to note that maintenance requirements may vary depending on the type, size, and usage of the compressor. By following a comprehensive maintenance routine, you can ensure the reliable operation of your air compressor and maximize its efficiency and longevity.

China Hot selling 30bar 40bar 6.0m3/Min Oil-Free Screw Type Air Compressor for Pet Bottle Blowing Industry   mini air compressorChina Hot selling 30bar 40bar 6.0m3/Min Oil-Free Screw Type Air Compressor for Pet Bottle Blowing Industry   mini air compressor
editor by CX 2023-09-28

China factory Customized Bulldozer Drive Sprocket for Caterpiller mini air compressor

Product Description

1.   Product Application Fields          
Construction Machinery                  
Agriculture Machinery                 
Mining Equipment                    
High-Speed Rail                       
Automobile Industry                   
Petrochemical                         
Energy                                  
Shipbuilding                          
General Machinery                    
2.  Research and Development                                             
   CAD Software                                                 
   3D CHINAMFG Modeling                              
DEFORM Simulation Software                        
3.  Material                               
Carbon Steel                           
Alloy Steel                             
Stainless Steel                          
Aluminum                             
4.  Heating Equipment                       
Electric Intermediate Frequency Furnace    
5.   Forging Equipment                     
2500Ton Double Disc Friction Press        
1600Ton Double Disc Friction Press        
1000Ton Double Disc Friction Press        
630Ton Double Disc Friction Press          
400Ton Double Disc Friction Press          
Sawing Machine                           
Shot Blasting Machine                      
Air Hammer                            
Punch                                   
6.  Forging Weight Range:0.05kg-100kg          
7.  Heat Treatment Equipment                                
Electric heating furnaces with precise computerized        
temperature control to achieve desired hardness and     
mechanical properties.                           
 
Water/Oil/Polymer quenching pool with mechanical  
Propeller agitation.
Induction/Flame hardening equipment.               
8.  Machining Equipment                              
CNC Center                                      
CNC Milling Machine                              
CNC Drilling Machine                              
CNC Lathe                                        
Grinding Machine                                   
Wire Cutting Machine                              
Electric Pulse Machine                             
EDM                                             

9.Inspection Equipment
Direct-Reading Spectrometer                              
Hydraulic Universal Testing Machine                                                 
Rockwell Hardness Tester                                
Brinell Hardness Tester                                 
Vickers Hardness Tester                                
Metallographic Analyzer                                   
   Magnetic Particle Tester                                    
Ultrasonic Tester                                       
CMM                                                 
Infrared Thermometer                                   
10.Certification of Quality Management System   
ISO9001:2008                                        
ISO/TS16949                                          

FAQ:  

1. Are you a genuine manufacturer?Yes, all products showed in our website are produced in our ISO9001:2015 certified factory; We are also a company registered by China Customs with the right to export and import.  

2. I want to keep our design in confidence; can we CHINAMFG NDA?Sure, to protect customers’ profit is our obligatory responsibility, signed NDA would be valid to both of us.. 

3. What should I offer to get your quotation?Please offer us your detailed information for the product, such as drawings with 2D/3D by software Pro/E, Auto CAD, SolidWorks, UG etc; as well as materials, surface treatment, quantity, package. Any special requirements should be highlighted especially for tolerance.  

4.How long does it take to receive samples?
20 working days,the lead time is the general production period and does not include the transportation time.
we can supply free samples with less quantity,but customers need to pay shipping cost.

5.How long is the manufacturing lead time?
Mass Production:30-45 working days after sample approval by yours.The lead time is the general production period without the transportation time.
We could make some special production arrangement effectively if customer has urgent need.

6.How long does it take to ship goods from China by sea?
It takes about 5 weeks to European ports plus 1 week customs clearance, so you can get the container within 6 to 7 weeks.It takes about 2 weeks to east coast and 3 weeks to west coast US ports.All sea goods are shipped from HangZhou Port.

7.How long does it take to ship goods from China by air?
It takes about 7 days to all major destinations.

8.What are the payment terms?
Payment terms are negotiable and will improve for long term customers.During the initial stages, we request 50% of tooling fee in advance with the balance payable on acceptance of samples.Production orders can be negotiable.We prefer 30% deposit and the balance by T/T before sails.But sometimes T/T15 days after sails would also acceptable.

9.New product development process
Got tooling order and sample order with 50% deposit—Hold a meeting with the relation dept.To ensure the developing schedule—Design mould, fixture and gauge and making them in our factory—mould.fixture and gauge making—producing samples—approved from customer-purchasing material-forging-heat treatment-shot blasting-machining-Inspection-package—delievry

10.Which countries do you export to?
Now mainly export to U.S.A, Germany, France, Italy, UK, Brazil, Swedish, Japan, Korea, Middle east of Asia, Thailand and so on.

11.Can we visit the factory to conduct an audit?
Yes, you are welcome to visit our factory.

12.How to handle the complains?
–If happen any complaints after delivery,please just show us photos and detail compliants points, we will check with the production department and QC department Immediately and give you best solving solution which agreed by both of us,moreover we will bear all the cost (including shipping cost).

All parts are made according to customer’s drawings or samples.If you have any parts to be made, please feel free to send your kind drawings/samples to us.Technical drawings including material mark, Product weight, Purchase quantity.The comprehensive information will help us quickly calculate the accurate and reasonable price for you.

 

Processing Object: Metal
Molding Style: Forging
Molding Technics: Die Forging
Application: Machinery Parts
Material: Steel
Heat Treatment: Quenching
Samples:
US$ 2/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

Can air compressors be used for gas compression and storage?

Yes, air compressors can be used for gas compression and storage. While air compressors are commonly used to compress and store air, they can also be utilized for compressing and storing other gases, depending on the specific application requirements. Here’s how air compressors can be used for gas compression and storage:

Gas Compression:

Air compressors can compress various gases by utilizing the same principles applied to compressing air. The compressor takes in the gas at a certain pressure, and through the compression process, it increases the pressure and reduces the volume of the gas. This compressed gas can then be used for different purposes, such as in industrial processes, gas pipelines, or storage systems.

Gas Storage:

Air compressors can also be used for gas storage by compressing the gas into storage vessels or tanks. The compressed gas is stored at high pressure within these vessels until it is needed for use. Gas storage is commonly employed in industries where a continuous and reliable supply of gas is required, such as in natural gas storage facilities or for storing compressed natural gas (CNG) used as a fuel for vehicles.

Gas Types:

While air compressors are primarily designed for compressing air, they can be adapted to handle various gases, including but not limited to:

  • Nitrogen
  • Oxygen
  • Hydrogen
  • Carbon dioxide
  • Natural gas
  • Refrigerant gases

It’s important to note that when using air compressors for gas compression and storage, certain considerations must be taken into account. These include compatibility of the compressor materials with the specific gas being compressed, ensuring proper sealing to prevent gas leaks, and adhering to safety regulations and guidelines for handling and storing compressed gases.

By leveraging the capabilities of air compressors, it is possible to compress and store gases efficiently, providing a reliable supply for various industrial, commercial, and residential applications.

air compressor

How does the horsepower of an air compressor affect its capabilities?

The horsepower of an air compressor is a crucial factor that directly impacts its capabilities and performance. Here’s a closer look at how the horsepower rating affects an air compressor:

Power Output:

The horsepower rating of an air compressor indicates its power output or the rate at which it can perform work. Generally, a higher horsepower rating translates to a greater power output, allowing the air compressor to deliver more compressed air per unit of time. This increased power output enables the compressor to operate pneumatic tools and equipment that require higher air pressure or greater airflow.

Air Pressure:

The horsepower of an air compressor is directly related to the air pressure it can generate. Air compressors with higher horsepower ratings have the capacity to produce higher air pressures. This is particularly important when operating tools or machinery that require specific air pressure levels to function optimally. For example, heavy-duty pneumatic tools like jackhammers or impact wrenches may require higher air pressure to deliver the necessary force.

Air Volume:

In addition to air pressure, the horsepower of an air compressor also affects the air volume or airflow it can provide. Higher horsepower compressors can deliver greater volumes of compressed air, measured in cubic feet per minute (CFM). This increased airflow is beneficial when using pneumatic tools that require a continuous supply of compressed air, such as paint sprayers or sandblasters.

Duty Cycle:

The horsepower rating of an air compressor can also influence its duty cycle. The duty cycle refers to the amount of time an air compressor can operate continuously before it needs to rest and cool down. Higher horsepower compressors often have larger and more robust components, allowing them to handle heavier workloads and operate for longer periods without overheating. This is particularly important in demanding applications where continuous and uninterrupted operation is required.

Size and Portability:

It’s worth noting that the horsepower rating can also affect the physical size and portability of an air compressor. Higher horsepower compressors tend to be larger and heavier due to the need for more substantial motors and components to generate the increased power output. This can impact the ease of transportation and maneuverability, especially in portable or mobile applications.

When selecting an air compressor, it is essential to consider the specific requirements of your intended applications. Factors such as desired air pressure, airflow, duty cycle, and portability should be taken into account. It’s important to choose an air compressor with a horsepower rating that aligns with the demands of the tools and equipment you plan to operate, ensuring optimal performance and efficiency.

Consulting the manufacturer’s specifications and guidelines can provide valuable information on how the horsepower rating of an air compressor corresponds to its capabilities and suitability for different tasks.

air compressor

In which industries are air compressors widely used?

Air compressors find extensive usage across various industries due to their versatility and ability to generate compressed air. Here are some industries where air compressors are widely employed:

1. Manufacturing: Air compressors are essential in manufacturing processes for powering pneumatic tools and equipment. They are used for tasks such as operating assembly lines, powering robotic machinery, running paint sprayers, and driving pneumatic actuators.

2. Construction: Air compressors play a crucial role in the construction industry. They power pneumatic tools like jackhammers, nail guns, impact wrenches, and concrete breakers. Compressed air is also used for concrete spraying, sandblasting, and operating air-powered lifts and hoists.

3. Automotive: Air compressors are widely used in automotive manufacturing and repair. They power air tools used in auto body shops, tire inflation equipment, pneumatic lifts, and air-operated brake systems. Compressed air is also utilized in vehicle painting and drying processes.

4. Oil and Gas: The oil and gas industry extensively relies on air compressors for various applications. They are used for pneumatic drilling, powering pneumatic tools in refineries and petrochemical plants, operating pneumatic valves and actuators, and providing instrument air for control systems.

5. Food and Beverage: Air compressors are employed in the food and beverage industry for tasks such as packaging, bottling, and sealing. They power pneumatic conveying systems, control air pressure in food processing equipment, and provide clean compressed air for food handling and storage.

6. Pharmaceutical and Healthcare: Air compressors find application in pharmaceutical manufacturing and healthcare facilities. They are used for operating medical equipment, such as ventilators and dental tools. Compressed air is also utilized in pharmaceutical processes, including tablet coating, fluid bed drying, and aseptic packaging.

7. Aerospace: The aerospace industry relies on air compressors for various applications, including aircraft maintenance and assembly. They power pneumatic tools for aircraft repair, provide compressed air for cleaning and pressurizing systems, and support ground operations, such as tire inflation and aircraft de-icing.

8. Mining: Air compressors are extensively used in the mining industry. They power pneumatic tools for drilling, rock blasting, and excavation. Compressed air is also utilized for ventilation, conveying materials, and operating underground equipment.

9. Energy and Utilities: Air compressors play a vital role in the energy and utilities sector. They are used in power generation plants for pneumatic control systems, instrument air, and operating pneumatic valves. Compressed air is also employed for cleaning and maintenance purposes.

These are just a few examples of the industries where air compressors are widely utilized. The versatility and reliability of air compressors make them indispensable in numerous applications across diverse sectors.

China factory Customized Bulldozer Drive Sprocket for Caterpiller   mini air compressorChina factory Customized Bulldozer Drive Sprocket for Caterpiller   mini air compressor
editor by CX 2023-09-27

China Good quality 250kw Variable Speed Drive High Efficiency Silent Industrial Screw Rotary Oil Free Dry Two Stage Air Compressor mini air compressor

Product Description

      

   Specification(VSD series)
  Model Capacity M3/min Power kw Noise level db Weight KG
3.5~10bar Water Cooling  Air Cooling
OFA1VSD OFA15VSD 1.1-3.3 15 74   930
OFA22VSD 4.5-5.6 22 74   1150
OFA30VSD 4-6.6 30 74   1300
OFW37VSD 5-8.4 37 74   1600
OFW45VSD 6.1-11.1 45 74   1750
OFA2VSD OFA55VSD 7.3-9.4 55 74   1900
OFA75VSD 10.7-12.4 75 74   2630
OFA90VSD 12.7-15.4 90 74   2700
OFA3VSD OFA110VSD 16.0-19.5 110 74    
OFA132VSD 18.8-21.8 132 74   4300
OFA160VSD 24.0-29.6 160 74   4300
OFA4VSD OFA200VSD 12.2-36.6 200 74    
OFA250VSD 14.2-41.8 250 74   6950
OFA275VSD 15.8-47.4 275 74    
OFA315VSD 45.0-52.1 315 74   6950
OFA5VSD OFA355VSD 50.4-57.5 355 74    
OFW1VSD OFW37VSD 2-5.9 37 74    
OFW45VSD 2.3-7 45 74    
OFW2VSD OFW55VSD 4.5-8.8 55 74    
OFW75VSD 4.5-13.2 75 74 2170  
OFW90VSD 4.5-15.5 90 74 2220  
OFW3VSD OFW110VSD 6.4-19.1 110 74    
OFW132VSD 7.7-22.4 132 74 3500  
OFW160VSD 14.5-42.9 160 74 3500  
OFW4VSD OFW200VSD 18-36.1 200 74    
OFW250VSD 19.-38.4 250 74 6400  
OFW275VSD 20.0-41.0 275 74    
OFW315VSD 46.0-50.9 315 74 6650  
OFW5VSD OFW355VSD 50.4-56.3 355 74 6950  
OFW400VSD 55.8-62.1 400 74 7060  
OFW450VSD 63.8-76.5 450 74 8400  
OFW500VSD 73.1-83.9 500 74 8400  
OFW630VSD 89.0-102.9 630 74 9125  
OFW750VSD 101.8-122.8 750 74 9225  

Company Profile

       ZheJiang Napu compressor Technology Co.,LTD was established in 2012  based in ZheJiang ,specializing in oil-free rotary screw air compressors, offering a wide range of products from airends to compressors . 
       With over 10 years experience in oil free screw air compressor. NAPU Compressor is compliant with ISO 8573-1, Class 0 standard and audited by TUV Rheinland and China National Quality Inspection Center of Compressor and Refrigerator.   
        The company is also compliant with ISO 9001:14001 and is CZPT in the domestic market for its quality-driven culture. The oil-free compressors manufactured by the company are used in a variety of sectors including some of our valued clients like CASC-China Aerospace Science Corporation, NORINCO-China North Industries Group, CNNC-China National Nuclear Group, CHANG AN AUTO, SINOPHARM, BYD and CALT and Sino-Chemical etc.
         Continuous improvement in productivity and efficiency is our goal, and we continue to offer an extensive services including our own branded oil-free compressor package as well as after-sales services for other leading brands.

 

Product Features

1. In house designed airend
2. 100% oil free air certified by Germany TUV.
3. Double-layer structure to reduce he noise.
4. Air Cooling and Water cooling are available.
5. VSD control are available.
6.Touch Screen PLC with preset running schedule, more intelligent control.
7.OEM&ODM service are accepted

 

FAQ

Q1. Are you trading company or manufacture ?
A: We are professional manufacture of oil free air compressors. More than 20 years of experience in air compressor manufacturing.
 
Q2. What’s payment term ?
A: T/T, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.
 
Q3. How about your after-sales service ?
A: 1.We can provide customers with installation and commissioning online instructions.
   
Q4. How about your warranty?
A: One year for the whole machine and 5 years for screw air end, except consumable spare parts.
 
Q5. Do you have any certificate ?
A: Yes, we can offer CE ,ISO  and certificate as clients’ demande.
 
 
Q6. How do you control quality ?
A: 1. The raw materials are strictly inspected
    2. Each compressor must pass at least 8 hours of continuous testing before leaving the factory.
  
Q7.How long could your air compressor be used?
A: Usually, more than over 10 years.

After-sales Service: Online Support
Warranty: 12 Months
Lubrication Style: Oil-free
Cooling System: Water Cooling
Power Source: AC Power
Cylinder Position: Horizontal
Customization:
Available

|

air-compressor

Choosing an Air Compressor

Considering a new Air Compressor? Here are some tips to make the decision easier. Learn the pros and cons of each type, including the differences between oil-injected and oil-free models, single stage and positive displacement. In addition, learn more about the different technologies that are available for your air compressor. It is important to choose an appropriate unit for the type of work you do. Here are some of the best compressors available today.

Positive displacement

There are several different types of air compressors, but most are positive displacement air compressors. They use a rotary or reciprocating component to compress air. The reciprocating component compresses air by reducing the volume of the chamber. Positive displacement compressors are used in bicycle pumps, chemical plants, and refrigerators. Positive displacement air compressors use multiple inlet ports. Despite the various types, the principle of operation remains the same.
Another type of positive displacement air compressor is a reciprocating piston. The piston inside a cylinder moves up and down, causing the compressed air to fill the upper part of the cylinder. These air compressors are used in a variety of different applications, including blowing bottles and gas pipelines. These air compressors can be water-cooled, lubricated, or non-lubricated. Different types have different capacities and air pressures.
A positive displacement flowmeter uses a rotating chamber that divides continuous fluid into discrete portions. The number of times the chamber is filled and discharged can be used to estimate the flow rate. The rotation speed of the measuring chamber is directly proportional to the flow rate. The drawbacks of this type of positive displacement flowmeter are that it is prone to jamming. If the fluid contains particles, it may be too thick for the meter to determine flow rate.
A negative displacement air compressor was invented in 1860 and is the oldest type of compressor. It uses two lobes positioned in a circular cavity. One rotor is connected to an engine, while the other pushes the other one to spin in the opposite direction. Negative displacement compressors are low-maintenance, but they do require more precision. They are often used in nuclear power plants because they use the kinetic energy of the rotating elements to produce pressure.

Oil-injected

Oil-flooded or oil-injected air compressors use liquid to seal and lubricate moving parts and reduce noise. Oil-flooded air compressors are effective for a variety of pneumatic tools and accessories. Some models have a thermostat that controls the amount of oil used during operation. Other types of oil-flooded air compressors are piston-type models. Here is an overview of the basic differences between these two air compressors.
An oil-injected air compressor is more expensive than a comparable oil-free air compressor, but its advantages far outweigh its disadvantages. An oil-free compressor is quieter, requires less maintenance, and has a lower price tag. It also offers a greater degree of air purity. A number of other advantages may also make this type of air compressor the better choice for many industrial settings. If you need a high-pressure compressor in a tight space, consider the benefits of an oil-free system.
Oil-injected air compressors require more maintenance than oil-free models. Both types of air compressors offer similar capacity and ISO 8573-1 Class 0 and 1-2 purity, but the oil-injected systems require more air-treatment components. They require an activated carbon filter and coalescing filter. Oil-injected air compressors will likely remain the standard for industrial air compressors for many years. And since their performance and efficiency are comparable, it may be worthwhile to invest in some point-of-use air treatment.
Both types of air compressors have their benefits. However, choosing between oil-free and oil-injected air compressors is not as straightforward as you might think. Whichever type you choose, make sure it will meet your needs. The benefits of an oil-injected air compressor outweigh their disadvantages. In general, oil-injected air compressors are more durable and can last longer than oil-free models. The only downside is their higher price.
air-compressor

Oil-free

When choosing an air compressor for your company, you’ll need to determine what it is going to be used for. For example, if you’re planning on using it to power multiple workers, you should consider getting an oil-free compressor. An oil-free compressor, on the other hand, is quieter and can power several workers at a time. If you’re a contractor, the most important consideration will be the type of jobs you’ll be doing. Higher air pressure means greater demand for air flow, and more pressure can damage the equipment.
Oil-free compressed air is certified 100% free of contaminants. Technically, oil-free air is not completely free of foreign matter, but it is extremely low within the limits of practical air quality. A technically oil-free air compressor might have a total oil level of 0.003 mg/m3. If you’re in need of a technically oil-free air compressor, you must install an air treatment equipment after your current compressor.
If you’re in the manufacturing industry, a good oil-free air compressor will save you money and reduce your environmental impact. Many of these tools require air compressors to work, and this equipment will ensure that they don’t get contaminated. To buy the best oil-free compressor, you should learn a bit about the different terms used by compressor repair companies. ACFM, for example, is the amount of air that can be compressed in one minute at rated conditions.
When you’re using an oil-free air compressor, you should know that the overall life of the device will be much shorter. Compared to an oil-flooded rotary screw air compressor, an oil-free compressor typically has a lifespan of 50 thousand hours. But it’s important to understand that this type of compressor can still cause damage to piping and processes. Therefore, you should choose an oil-free compressor when you need to clean air for your business.

Single-stage

A single-stage air compressor, also known as a piston air compressor, compresses air only once before storing it in a cylinder. This stored air has enough energy to power a variety of pneumatic tools, such as screwdrivers, chisels, and wrenches. These units are also ideally suited for low-flow applications and are widely used in gas stations, auto shops, and various manufacturing plants.
A single-stage air compressor uses two valves – one for inlet and one for outlet – to transfer compressed air. Both valves are actuated by springs. The inlet valve has a slight curvature to provide protection from damage. The compressor’s outlet valve opens when the pressure in the cylinder is higher than the pressure in the storage tank. The piston moves very quickly inside the cylinder, exerting a high amount of force throughout the compression process. This high piston speed is a common cause of compressor wear and tear.
A single-stage air compressor is ideal for smaller tradesmen and small construction crews. Its lightweight and compact design make it easier to transport and store. While it may be tempting to buy the first cheap air compressor you see, it’s important to balance the price against performance to choose the right air compressor for your needs. The best single-stage air compressor is one that provides excellent performance and durability. Its two-stage counterpart is designed for larger construction teams and large applications.
The main difference between a single-stage and a two-stage air compressor lies in their capacity. A single-stage air compressor compresses air only once and delivers it into the storage tank, while a two-stage compressor compresses it twice, creating double the pressure. Because of this, single-stage air compressors are cheaper and versatile than their counterparts, which means that they can be used for multiple purposes.
air-compressor

Low-noise

A low-noise air compressor is a type of industrial compressor that is less noisy than regular air compressors. These are generally smaller machines designed for smaller factories and workshops with a few to several employees. They are designed to handle mid-weight volumes of compressed air per day. This type of compressor is especially useful for smaller manufacturing businesses that need to produce compressed air for medical applications. Small breweries can also benefit from the low-noise capabilities of these compressors.
Low-noise air compressors come in various sizes and features. For smaller jobs, you can purchase a one-gallon model that is lightweight and portable. For larger jobs, you can purchase one with a larger tank that can provide more pressure for longer jobs. However, a larger tank will make the compressor heavier and harder to transport. To avoid this, make sure to check the size of the tank and how much power it can handle.
Considering a low-noise air compressor for your business? If so, you’ve come to the right place. There are a variety of affordable and dependable low-noise options to choose from. A CAT 10020C, for example, is designed to provide high-volume air to many outlets at once. A CAT 10020C comes with a 10-gallon tank, wheels, and a carrying handle.
Noise levels can also affect the productivity of employees. When employees work with air compressors in close proximity to each other, they may develop tinnitus. If employees are free from tinnitus because of the loud noise, they are likely to work more efficiently. Moreover, it will be easier for them to focus and communicate efficiently. If you need a compressor, a low-noise one is an excellent choice.

China Good quality 250kw Variable Speed Drive High Efficiency Silent Industrial Screw Rotary Oil Free Dry Two Stage Air Compressor   mini air compressorChina Good quality 250kw Variable Speed Drive High Efficiency Silent Industrial Screw Rotary Oil Free Dry Two Stage Air Compressor   mini air compressor
editor by CX 2023-05-16

China 12V Portable Mini PCP Air Car Conditioner Compressor Air Gun and Paintball Tank Pump with Adapter for Scuba Diving with Great quality

Relevant Industries: Building Material Retailers, Production Plant, Machinery Mend Retailers, Home Use, Building works , Vitality & Mining, Other
Showroom Location: China
Condition: New
Type: Rotary
Configuration: Transportable
Power Resource: AC Energy
Lubrication Design: Lubricated
Mute: NO
Voltage: 12V 220V/110V
Dimension(L*W*H): 390*290*200mm
Weight: 6.7KG
Guarantee: 2 several years
Functioning Pressure: 300bar
Air ability: 10bar
Equipment Check Report: Provided
Online video outgoing-inspection: Offered
Advertising Variety: New Solution 2571
Guarantee of core factors: 2 several years
Core Factors: Motor, Pump
Fuel Sort: Air
Solution name: Piston Air Compressor

FOREWORD Welcome to acquire our goods, our organization can offer OEM and personalized solutions. Permit you to different your self from your friends.You can customise it. The user handbook defaults to English, but you can select other languages or personalize. You can also chooseneutral items and generate your own brand name. All merchandise have to to go inspection ahead of depart the factory. Intention to make sure itsquality. We can produce or improve the solution in accordance to your demands. Decide on us, enable you have a wonderful earnings, we will meet up with your requirements, enable you defeat your rivals very easily. We search CZPT to cooperating with you. Characteristics Solution Requirements

Product IdentifyPCP Air Compressor
Specification4500Psi/30Mpa/300Bar
Weight(KG)6.7KG
Voltage 12V
Noise<75db
Cooling ProgramAir Cooling
Inflation Velocity0.5Ltank, telescopic belt conveyor for truck loading and unloading from bars to three hundred bars need 19-20 mins
Several Electrical power Supply Merchandise Advantages 01Effortless To CarryThe air pump weighs only 6.7KG, Modest dimensions, easy to have and extensive application assortment. 02Lower Vibration And Minimal SoundWith water pump, 2 cooling techniques of water cooling and air cooling, efficient heat dissipation. 03Air coolingHigh effectiveness and strength preserving, straightforward to use,no troublesome warmth dissipation procedure. Our products are inorganic oil, the air is pure and breathable Other goods are organic oil, disagreeable scent Our items have been inspected 3 moments ahead of leaving the manufacturing unit and are of very good high quality Other goods are not inspected at the manufacturing unit, and the failure price is large WARNING1. This edition is not auto-cease variation, you should flip it off manually when the force gauge attain the worth.2. Note: Pls cool down soon after operating twenty five-thirty minutes. Do not suggest to inflate in excess of 60ci tank as it will cause injury to the 12V compressor.3. If your gadget are unable to be inflated or the velocity is quite sluggish, Sewage treatment seventeen – tooth sprocket processing tailored nylon wheel drive chain. remember to examine if the rapid connector is typical.4. The device are not able to be commenced below interior pressure, normally, it will result in hurt. Each and every time the electrical power is turned off (including throughout the shutdown cooling cycle), the bleed valve have to be released. About Us Firm PROFILEWe are a leading manufacturer and developer in the fields of pcp pumps and compressors. We have a extremely professional team of specialized engineers, primarily engaged in high-precision machining and pump producing. We have been concentrating on innovation andhigh-quality of products , making equipment and screening equipment strictly according to army requirements, and inspecting each and every solution ahead of delivery to buyers. The cost we supply you will make it effortless for you to get the competition. Seeking CZPT to cooperating with you. Production SCENE Client Scenario British buyers arrived to check out the manufacturing unit Customers check out customized solution layout options Consumer and technician go over customization remedy Team INTRODUCTION Generation team Style team Product sales group Our Support 1.We can aid buyers in industry operations, help consumers in market place promotion, give different product photographs and video clips,and web webpage photo layout.2.We can give electronic manuals (Word) in numerous languages.3.We can supply merchandise growth and customization, and packaging design. Total Components Packaging Style Following-sale warranty①The merchandise is assured for 3 several years ②We can offer you with repair areas ③We can give you with product servicing structure diagram ④We can offer you with fix movies Packing and shipping and delivery FAQ 1. How lengthy will it take to fill a 450cc tank? The very first time you fill it will get a more time as you are going from -3,000 psi. So the initial time like 20-30 min. It will take at the very least 15 pumps for every single 10 bar force of your want in the 450cc tank. It all is dependent on your in reality situation. 2. Can I use this with paintball air tanks or the CZPT Air bow ? If you have the correct fill adapter for the connector.You can fill them. It has a 8mm feminine Foster fast-disconnect on the stop of the pump hose. 3. What the size of the microbore hose?There is a 50cm(20”) hose with the pump.If you want purchase a a lot more longer hose. Remember to send out a message to client provider. 4. Can your organization provide custom-made assembly or supply OEM PCP handbook pump merchandise?We are skilled manufacturer of pumps and air compressors. Our manufacturing facility has accumulated abundant experience in the subject of air pump, Kid bicycle crankset with 3-Boits tighern sprocket and superlight superstrong plane aluminium axle for 105mm kid crankset air compressor OEM PCP guide pump assembly.

air-compressor

How to Repair and Maintain an Air Compressor

A compressor is a device used to move air from one place to another. Air enters the air compressor through the intake valve. Inside the compressor, the vanes on the inner rotor rotate within an eccentric cavity. The self-adjusting length arm divides the space into multiple cavities of different sizes. As the rotor rotates, air fills the cavity. As air flows around the cavity, it builds pressure and is squeezed out of the compressor output.

Positive displacement

Positive displacement air compressors use reciprocating pistons to compress air. Gas is drawn in during the suction stroke and compressed by moving the piston in the opposite direction. It then discharges the compressed air by moving it in the opposite direction. This type of air compressor is most commonly found in automobiles, refrigerators, and other applications that require high pressure. However, it is not as efficient as a centrifugal compressor.
Most modern air compressors use positive displacement. Positive displacement models capture a volume of air in the compression chamber and distribute it when the pump is operating at maximum capacity. They are more economical than their negative displacement counterparts. Reciprocating screw air compressors are the most common positive displacement compressors. The reciprocating screw air compressor adopts a water jacket around the cylinder and is often used in processes such as oil drilling.
A bicycle pump is an example of positive displacement compression. Air is drawn into the cylinder and compressed by the moving piston. A piston compressor works on the same principle, but it uses a rotating crankshaft or connecting rod to complete the movement of the pistons. There are two types of positive displacement compressors: single-acting and double-acting. Both types work on the same principle, both are positive displacement compressors. The difference between the two types is the pressure ratio.
In air compression, positive displacement compression reduces the volume of the fluid and reduces its viscosity. This results in higher pressure ratios and is used in centrifugal, axial, and scroll compressors. Positive displacement is a common feature of most air compressors. Positive displacement compressors offer the same benefits and are more energy-efficient when applied to oil-free and gas applications. This type of compression is usually the best choice for low-pressure applications.

oil free

If you’re looking for an air compressor for your business, consider an oil-free air compressor. These models offer cleaner, quieter operation than traditional air compressors and require less maintenance. They also meet ISO Class 0 or Class 1 air purity requirements. Oil-free air compressors are also quieter, with fewer moving parts and less noise. These advantages make oil-free air compressors an ideal solution for many commercial applications.
Air purity is critical in many industries. Even the tiniest drop of oil can damage production equipment or damage products. The best way to find an oil-free air compressor for your business is to consider the process and end product. As air quality improves, more and more businesses are turning to oil-free compressors. Some of the advantages and disadvantages of these air compressors are:
When choosing an oil-free air compressor, it is important to understand the terminology used in the industry. Knowing these terms will make it easier for you to choose the right compressor for your needs. ACTFM, or actual cubic feet per minute, is an industry term for measuring the amount of air pumped in one minute under rated conditions. Although a simple number, it can be very useful in determining which type of air compressor is best for your application.
The ISO 8573-1 international standard defines air quality and provides air purity classifications. The strictest classification is air purity class 0. Many manufacturers claim that oil-free air compressors meet this standard. However, a class 0 oil-free air compressor does not necessarily mean that the air is free of contaminants. In fact, Class 0 is the benchmark for air purity. While zero air quality is the highest level, that doesn’t mean it’s completely oil-free.
air-compressor

double acting

A double-acting air compressor is a device that uses compressed air to generate electricity. Its working principle is based on piston and connecting rod. The connecting rod connects the crankshaft to the piston through pins and caps. The piston moves as the piston moves. Rods are usually made of forged carbon steel. In terms of service and maintenance, double-acting compressors require regular vise maintenance and proper cleaning.
The displacement of the compressor is a measure of the displacement that the piston can produce in a certain period of time. Displacement is usually expressed in actual cubic feet per minute. The exact calculation depends on the type of cylinder and the configuration of the compressor. Single-acting cylinders can have head-end or crank-end displacement, both of which can be measured using the displacement equation. A double-acting air compressor will use this equation. 4 and 6 calculate the displacement.
Double-acting air compressors have multiple cylinders and are made of cast iron. They are water-cooled and have a mechanical connection between the piston and connecting rod. A double-acting compressor compresses air twice per revolution of the motor. One cylinder moves up, while the other cylinder moves down. The piston moves down, allowing air to enter through valve #1. During the operation of the compressor, the temperature of the air and gas increases.
Double-acting air compressors typically have high pressure and are considered workhorses. Double-acting compressors also feature intercooling and double compression. As a result, these machines tend to last longer than single-acting compressors. Its low speed and dual compression make it a workhorse in the compressor industry. Double-acting air compressors are workhorses and versatile devices.
air-compressor

fuel tank pressure switch

You can adjust the pressure in the air compressor tank by adjusting the differential pressure. You can turn the mainspring clockwise or counterclockwise to increase or decrease the pressure. This valve will open when the pressure is low enough to start the compressor. If the pressure is too low, the valve should be closed. The cut-in and cut-out pressures should be set to appropriate values. After adjusting the tank pressure, check the hysteresis of the tank pressure switch and set the desired shutoff pressure.
If the pressure in the tank falls below the cut-in level, the tank pressure switch must be replaced. You can test the switch with a multimeter. Make sure the switch is not damaged. If you can’t find the switch, you can look at the other sections. If you find any damaged or missing parts, you should replace them. Otherwise, it may be time to check the tank pressure switch. You may need to disassemble the compressor and remove the switch.
The fuel tank pressure switch is an important part of the air compressor. It keeps you informed of the amount of air delivered by the compressor. If your tank or tank is damaged, your readings will be wrong. If the pressure switch is damaged, it will not function properly and result in incorrect readings. Fortunately, there are some easy ways to fix this. To prevent this from happening, keep the tank pressure switch in good condition.
When the air pressure in the tank drops to the cut-in pressure setting, the switch allows power to flow through it. This will start the motor and pump of the air compressor. Then, if the pressure in the tank rises above the cut-off level, the switch will trip and stop the compressor. This will prevent it from being over-pressurized. Power flow will continue to flow to the motor. Depending on your compressor model, you can change the cut-in and cut-out pressures as needed.

energy source

The power supply of the air compressor is very important. Most air compressors run on 12 VDC, which is ideal for automotive use. Alternatively, you can buy a switching power supply for around $20. No matter which power supply you choose, you must ensure that it can support the maximum current of the compressor. You can find power supplies in all sizes, from quarter-horsepower to five-horsepower.
The voltage required for a three-phase air compressor will vary. Three-phase air compressors require three separate power cords and a three-phase electrical service panel. This is because a standard 120/240-volt electrical service panel is not sufficient to power a three-phase compressor. Additionally, three-phase compressors require three separate isolated wires for the engine and motor circuits. Three-phase compressors do not require a neutral wire.

China 12V Portable Mini PCP Air Car Conditioner Compressor Air Gun and Paintball Tank Pump with Adapter for Scuba Diving     with Great qualityChina 12V Portable Mini PCP Air Car Conditioner Compressor Air Gun and Paintball Tank Pump with Adapter for Scuba Diving     with Great quality
editor by Cx 2023-05-04

China 1.5kw 2hp Mini Mobile Cheap Piston Air Compressor for Spray Paint Airbrush 12v air compressor

Condition: New
Variety: PISTON
Configuration: Moveable
Electricity Resource: AC Energy
Lubrication Fashion: Lubricated
Mute: Yes
Dimension(L*W*H): 980*380*8mm Sprocket Bicycle Crankset with Bottom Bracket pls simply click listed here
Lower force screw air compressor,pls click on listed here
Regular Screw Air Compressor,pls simply click here
Piston Air Compressor,pls simply click right here
Oil free Air Compressor,pls click right here:
Booster compressor,pls click on here


Manufacturing facility set up air compressor program relationship diagram

It is far better to acquire the essential total equipments right here,and we will recommend the ideal equipment to you.

Ralated Equipments Suggest:
Aluminum compressed system pipes,pls simply click now
Air tanks,pls click listed here Transmission Solid Stainless Steel Plastic Leaf Scraper Trencher Double Pitch Pintle Drag Push Roller Conveyor Sprocket Chain
Air dryers,pls click here
Air compressor servicing spare parts,pls click on here
Machine operating web site

Business Info
Our manufacturing facility was established in 1997,covers an location of 173,160 square meters,within there are 70,000 square CZPT standard workshops. In Could 25th 2016 Our manufacturing facility signed a strategic cooperation arrangement with CZPT (China) Investment Co., Ltd. Below the agreement, CZPT and our team will jointly build, generate and market mining & design equipments.

Certifications
Packaging & Delivery
FAQ1. How prolonged is your air compressor & drilling rig guarantee? ∗ 1 a long time for the total equipment following go away the factory2. Do you give Right after- product sales service elements? ∗ China producer list 8T-120T C45 metal Substantial Top quality Industrial sprocket chain wheel Of course, we have.3.How lengthy could your device be used? ∗More than ten years if have regular servicing.4. How is your device quality?
∗All the equipment must move the strict examination prior to depart factory.
And our factory has previously mentioned twenty several years production experience,can gurantee the good quality.5.Which payment term you accpet?
∗Now we will accpet TT,LC,Western Union,Trade Assurance on the web,Paypal,Funds,and many others.

six.How about the shipping time?
∗Within about 1 7 days.

seven.Can go to your factory?
∗Yes,welcome to our manufacturing unit. We will take care of you in China,and select you up at airport.
We are near to Xihu (West Lake) Dis. Airport.

eight.Are you a maker?
∗ AA steel forty five enamel HJ125 Motorcycle Sprocket kits and sprocket chain elements We are trade offcie in ZheJiang m,our manufacturing unit is in ZHangZhoug.

Comply with us

air-compressor

Types of Air Compressors

There are many types of Air Compressors available on the market. Learn which one is right for your needs and what makes one better than another. Find out more about Single-stage models, Oil-free models, and Low-noise models. This article will explain these types and help you decide which one you need. You can also learn about Air Compressors that have single-stage compressors. If you are looking for a high-quality compressor, this article will help you choose a unit.

Air Compressors

Air compressors work by forcing atmospheric air through an inlet valve. As the piston moves down, it pulls atmospheric air into the chamber. As the piston rises, it forces the compressed air out of the cylinder through an exhaust valve. One of the most common types of air compressor is the reciprocating type. Another type of compressor is a single-stage piston. These types of compressors compress air in one stroke – equivalent to the complete rotation of the piston’s crankshaft.
These devices change electrical or mechanical energy into pressurized air. When air is compressed, its volume decreases, increasing its pressure. Air compressors typically have a minimum pressure of 30 bars. The lower pressure band is the range of air pressure. Most compressors are controlled separately, but network controls can be used to interconnect multiple compressors. This type of controller will not work for all types of compressors. There are other types of air compressors that can communicate with each other.
Compressed air has multiple applications in all kinds of industries. In agriculture, it can power pneumatically powered material handling machines for irrigation and crop spraying. Dairy equipments also use compressed air. Compressors are also used in the pharmaceutical industry for mixing tanks, packaging, and conveyor systems. Portable air compressors, which can be powered by diesel fuel, are frequently used at remote drilling sites. Portable air compressors are also commonly used in oil and gas. They can be used to remotely control valves and install reactor rods.
Whether you use an air compressor for agricultural purposes or in a manufacturing setting, there are some features to consider when choosing an air compressor for your needs. A good compressor will have a safety device. It will automatically shut off the input air and output air once sufficient compressing has been achieved. These features will help your air compressor remain efficient and protect your equipment. The safety device is an important feature of any air compressor to increase its overall efficiency.
Vane air compressors are the most common type. They are generally smaller and less powerful than reciprocating piston compressors, so you can use one of these for applications that are under 100 horsepower. The vane air compressors have low compression ratios and high capacities, but they are generally limited to low-power applications. Vane compressors tend to run hot, and they typically have a low compression ratio. It is important to choose the correct oil viscosity for your compressor.
air-compressor

Single-stage models

When comparing single-stage air compressors, look for the term “stages.” Multi-stage compressors use two stages and can handle more capacity and pressure. One stage involves pressurizing air using a piston and a lower-pressure cylinder. This compressed air is then moved to a storage tank. Single-stage models tend to be more energy-efficient than their two-stage counterparts. But if you don’t need a high-pressure cylinder, a single-stage air compressor can be the best choice.
Although single-stage air compressors produce less power, they can produce enough air to power pneumatic tools and other pneumatic equipment. These single-stage units are most useful for smaller-scale home projects and DIY projects. For more industrial purposes, a dual-stage model is the best choice. But if you’re in a hurry, a single-stage unit may be sufficient. Ultimately, it depends on what you plan to do with the air compressor.
Single-stage air compressors feature a single cylinder, one piston stroke for each revolution of pressurized air. Single-stage compressors are typically smaller and more compact, making them a good choice for smaller work environments. Their cfm capacity (cubic feet per minute) is an important indicator of operating capacity. If you plan to use multiple pneumatic tools, you will probably need a higher cfm model. Similarly, the horsepower of single-stage compressors indicates its working capacity. One horsepower moves 550 pounds per foot per minute.
Multi-stage air compressors are generally more expensive and more energy-efficient than single-stage units, but they can offer higher air flow rates. While they may be more complex, they can lower general operating expenses. If you plan on using your air compressor for industrial or commercial use, a dual-stage model might be the best choice. However, if you’re planning to use the air compressor for mass production, a single-stage model may be the best choice.
Single-stage air compressors have the same piston size and number of inlets, while dual-stage models have a smaller first piston and a much longer second piston. Both have a cooling tube in between the two pistons to reduce the air temperature before the second round of compression. The single-stage model is typically small and portable, while the double-stage air compressor is stationary. These compressors can both be stationary and large.

Low-noise models

Despite its name, low-noise models of air compressors are not all the same. The noise level of a compressor can be affected by several factors, including the power source and proximity to the machine. Reciprocal compressors are generally louder than electric ones because of their many moving parts. By contrast, rotary-screw and scroll compressors have fewer moving parts and are quieter.
The noise level of a gas-powered air compressor can be extremely high, making it unsuitable for use indoors. To combat this problem, you can choose an electric model. The noise level of a compressor is primarily caused by motor friction. The cover of a piston is also a major factor in noise, as pistons with minimal covers will produce a lot of noise. Previously, oil was required for a quiet compressor. However, this has changed thanks to the medical industry’s demand for oil-free models.
The CZPT EC28M Quiet Air Compressor is another model that features quiet operation. This air compressor makes 59dB of noise. This level is low enough to allow you to carry on normal conversations while it cycles. In addition, this compressor has an industrial oil-free pump and a 2.8 Amp direct-drive induction motor. These two features make it a great choice for businesses.
Low-noise models of air compressors are available for the construction industry. However, these compressors are not necessarily low-quality, which is why you should consider the noise level of your air tool before purchasing one. The specialists at CZPT can recommend the low-noise models for your particular application and space. Noise can distract people who work near the air compressor. That is why many businesses now opt for these models.
air-compressor

Oil-free models

A number of oil-free models of air compressors are available, but what makes them special? Oil-free compressors don’t contain oil, so they’re lubricated by grease instead. They’re a good choice if you’re working with a small compressor and don’t want to risk damaging it. On the other hand, oil-free models do generate significant amounts of heat, which can damage the compressor. Higher pressure can grind the compressor against itself, or even warp it.
A few words of knowledge can help you choose the best oil-free air compressor for your needs. For example, a compressor’s horsepower is a measurement of how powerful the motor is. Higher horsepower means a higher PSI or ACFM. You can also use the ACFM to compare the two. Scroll technology is a modern air compression system that uses a stationary and mobile spiral. This reduces the volume of air in the compressor by directing it to the center.
Purchasing an oil-free air compressor doesn’t have to be a daunting task, though. A good distributor can advise you on what type of oil-free air compressor is right for you. This way, you can save money and enjoy peace of mind while using your air compressor. And, of course, the best way to get a great deal on an air compressor is to speak to a distributor who is knowledgeable about the products available.
An oil-free air compressor is a great option for businesses that are sensitive to the contamination of air. For example, in the pharmaceutical and food industry, a minuscule oil could spoil a product or even damage production equipment. Oil-free air compressors generally have lower maintenance costs than oil-flooded models because there are fewer moving parts. Because of this, oilless air compressors require fewer maintenance and may still need to be replaced occasionally.
A few advantages of an oil-free air compressor over an oil-lubricated one include lower noise levels. Oil-free air compressors tend to be less noisy and run more quietly than oil-injected ones, but you should still carefully weigh the pros and cons before making a decision. Also, consider how much you use your air compressor before choosing a model. The pros outweigh the cons. In the end, you’ll be glad you chose an oil-free air compressor.

China 1.5kw 2hp Mini Mobile Cheap Piston Air Compressor for Spray Paint Airbrush     12v air compressorChina 1.5kw 2hp Mini Mobile Cheap Piston Air Compressor for Spray Paint Airbrush     12v air compressor
editor by Cx 2023-04-28

China 10 years warranty high quality double cylinder tire inflator tyre inflator portable mini electric air pump air compressor air compressor harbor freight

Error:获取session失败,

air-compressor

The Air Compressor Is a Versatile Tool

The Air Compressor is one of the most versatile tools in any garage or workshop. It is easy to use and can perform a variety of tasks, from jackhammering to drilling. These machines are available in a wide variety of sizes and types, making it an excellent choice for a variety of situations. With a single motor, you no longer need separate motors for each tool. Its lightweight, compact design makes it easy to handle, and the single motor also reduces wear on parts.

Oil-injected

Oil-injected air compressors require a large amount of lubricant, which needs to be added to the sump regularly to maintain optimum performance. As there are many types of industrial fluids, a well-intentioned maintenance technician may add the wrong lubricant to the compressor. If this happens, the compressor will become incompatible with the lubricant, resulting in excessive carryover and the need to flush and replace downstream air treatment components.
Typically, the G 110-250 oil-injected rotary screw compressor from Atlas Copco provides reliable compressed air, preventing costly downtime. The G110-250 oil-injected rotary screw compressor is highly reliable and durable, enabling it to function in temperatures up to 46degC/115degF. Despite the oil-injected air compressor’s robust design, this unit requires very little on-site installation, and it features simple operation.
The primary advantage of oil-injected air compressors is the reduced cost of running. The cost of oil-free compressors is less than half of that of oil-injected ones, and it will require fewer maintenance costs in the long run. Moreover, the oil-free system is more environmentally friendly than oil-injected air compressors. But the drawbacks of oil-injected air compressors are substantial, too. It can contaminate finished goods and cause a significant financial risk for the manufacturer.
An oil-injected rotary screw air compressor offers several advantages over its counterpart. First, it features an innovative vertical design with variable-speed drive, allowing it to run more efficiently. Second, oil-injected air compressors reduce energy consumption by up to 50% compared to non-oil-injected air compressors. They also have a thermostatic valve, allowing them to maintain an optimum temperature. Thermostatically-regulated oil coolers allow the compressor to run more quietly.

Oil-free

What is an oil-free air compressor? The name refers to a type of air compressor that does not contain oil in the compressor chamber. Oil-free air compressors still use oil for various purposes, including lubricating the moving parts and managing waste heat. However, many people do not realize that their air compressor still requires oil for proper functioning. This article will explore why this type of air compressor is preferable for many users.
First of all, oil-free air technology has many benefits. For one, it reduces the energy cost involved in filtering air, and it minimizes leaks. Moreover, it also reduces the oil costs associated with compressor refills. And finally, it reduces the risks of contamination. Oil-free air technology is the future of compressed air. If you’re looking for an oil-free air compressor, here’s what to look for in your search.
Depending on the purpose of your air compressor, it may be beneficial to invest in an oil-free air compressor. Oil-lubricated air compressors are generally more durable than their oil-free counterparts, but they may cost twice as much. You should still consider the cost of ownership before purchasing an oil-free compressor. The oil-free models can be easier to transport, and they are more powerful. Moreover, they’re quieter than oil-lubed models.
An oil-free air compressor also means less maintenance, as it doesn’t need oil to work. This type of air compressors also features fewer moving parts, which means fewer places for problems to develop. All oil-free air compressors are manufactured to meet ISO Class 0 and 1 air purity standards. They also have less noise and vibration compared to their oil-based counterparts. So, why not choose an oil-free air compressor for your business?
air-compressor

Gasoline

When choosing a gas-powered air compressor, it’s important to consider the advantages of gasoline. This energy source can power a large air compressor without electricity. However, this type of air compressor lacks electrical hookup, so you’ll need to run an extension cord if you need to use it at a distance. However, gas compressors are able to function with just a gas tank. This makes them ideal for medium to heavy-duty industrial applications.
Another important consideration when choosing a gas air compressor is its size. Larger compressors are typically larger than portable ones and require more space. This makes them easier to transport and operate on the go. However, if you’re not sure which type of air compressor is best for you, consider the gas-powered versions. While they may be lighter, they don’t run as smoothly as their electric counterparts. Gasoline-powered compressors are not as portable as their electric counterparts and require proper maintenance.

Electricity

Electricity in an air compressor is not cheap. A 25 HP air compressor runs for ten hours each day, five days a week. The motor in these machines consumes 746 watts per hour. To find out how much electricity the equipment uses, multiply the wattage by the running time. For example, if the compressor runs for three hours, then it will use 1.9 kilowatt hours of electricity. To determine how much electricity an air compressor uses per day, you can calculate the kilowatt hours and multiply the number by the utility rate. Considering this, you can determine the cost of running your air compressor once per month.
The cost of operating an air compressor depends on the type of compressor. Electric air compressors are often silent and can run without any maintenance. These tools can be left unattended for up to four thousand hours before requiring repair. Electric air compressors require higher power for higher pressure, so you should plan accordingly. Whether or not you need a maintenance visit is up to you, but the benefit of not having to spend a fortune on repairs is priceless.
Although compressed air is not an energy-efficient source, its use in a variety of applications may save you money and kilowatts. Since an air compressor uses power when it is running, the cost is lower than the cost of operating a power tool. If you plan to use your air compressor for a long time, make sure that it is maintained properly. Proper care will save you money and power, and you may even be able to get an extended warranty if the compressor breaks down.
air-compressor

Variable frequency drive

The main purpose of a variable frequency drive (VFD) in an air compressor is to reduce energy consumption in the process of compression. A single motor drag system cannot adjust its speed continuously according to the weight of the load. By applying frequency control to the compressor, the power consumption can be reduced while maintaining the same pressure level. Therefore, a VFD is an excellent choice for compressors. Its benefits are numerous.
A VFD can also monitor the temperature of the motor and send error signals if the motor is running too hot or too cold. This eliminates the need for a separate sensor to monitor the oil pressure. These functions are useful not only in lowering energy consumption, but also in improving the performance of an application. Moreover, a VFD can monitor additional variables such as temperature and motor speed. Hence, it is a useful investment.
When using a VFD, it is crucial to choose the right motor. The speed of the compressor should be within the maximum starting limit of the motor. The air tank may be of any size, but a constant pressure limit is required to keep the VFD running within the service factor of the motor. In addition to a VFD, a master controller should also include a remote pressure set point and a PID card for a master controller. The transmitter should incorporate all useful data from the VFD, including the speed and the oil temperature. The VFD must be tested before it is integrated with the master control. It should be tested for min and max speed, temperature, and current within the expected range.
The use of a VFD in an air compressor has many benefits. One of the most notable is the reduction in power consumption. Fixed-speed compressors run on set points of six to seven bar. An extra bar of compression uses 7 percent of energy. This energy is wasted. A VFD-powered air compressor can also increase the life span of compressor parts. It is one of the best investments in your compressor. So, why wait any longer?

China 10 years warranty high quality double cylinder tire inflator tyre inflator portable mini electric air pump air compressor     air compressor harbor freightChina 10 years warranty high quality double cylinder tire inflator tyre inflator portable mini electric air pump air compressor     air compressor harbor freight
editor by CX 2023-04-27

China 16bar High Pressure Integrated Screw Air Compressor For Laser Cutting Machine mini air compressor

Relevant Industries: Accommodations, Garment Retailers, Constructing Content Stores, Producing Plant, Equipment Fix Retailers, Food & Beverage Factory, Farms, Restaurant, House Use, Retail, Food Shop, Printing Stores, Construction works , Power & Mining, Food & Beverage Shops, Marketing Organization, Fiber laser cutting business
Showroom Place: Canada, United States, Peru, TOGO 2019 52cc 2 stroke gasoline backyard garden mini power tiller Saudi Arabia, Indonesia, India, Mexico, Russia, Spain, Thailand, Chile, Sri Lanka, South Africa, Malaysia, Australia
Situation: New
Sort: Screw
Configuration: Stationary
Energy Supply: AC Power
Lubrication Type: Lubricated
Mute: Of course
Design Amount: CPMZY15
Voltage: 380V/50Hz/3ph Optional
Dimension(L*W*H): 1900*seven hundred*1650mm
Bodyweight: 560kg
Guarantee: 2 Many years, 24months
Doing work Force: 16bar
Equipment Test Report: Offered
Video clip outgoing-inspection: Provided
Marketing Kind: New Merchandise 2571
Guarantee of main elements: 1 Calendar year
Core Elements: PLC, Force vessel, Motor, Equipment, Motor, Pump, Bearing, Very hot Sale Higher Good quality Low Noise Black Speed Gearbox Equipment Reducer Box Worm Drive Shaft Gearbox Gearbox, Airend
Gasoline Type: Air
Air shipping and delivery: forty.9cfm 1.16m3/min
Pressure: 16bar
Motor electricity: 20hp 15kW Everlasting magnet variable
Cooling approach: by air
Air outlet measurement: G3/4
Sounds: considerably less than 65dB(A)
Invertor: Inovance
Management: PLC
OEM: Provided
Packaging Particulars: Plywood case
Port: ZheJiang

16bar Higher Strain Built-in Screw Air Compressor For Laser Cutting Machine

Item Positive aspects

The Air Compressor for Fiber Laser Chopping Equipment
Integrated compressed air program contains screw compressor, refrigerated air dryer, tank specialised for fiber laser cutting machine.
Far more Hassle-free
Integration of air compressor, air tank, and air dryer. It avoids the trouble of buyers getting added pipes and fittings. Use straight right after installation, preserving area.
Far more Dependable
Modular style, sturdy parts, lower sound and vibration, and simple servicing.
Energy Performance
Using everlasting magnet variable velocity motor, specialized for laser reducing machine, reducing force leakage and more strength-preserving.
Pure Compressed Air
Higher efficiency refrigerated dryer, multi-phase precision filter, oil articles of gasoline is reduce than .001 PPM, making certain the purity of compressed air.

Specialized Parameters

Model CPMZY15
Variety
air-cooled twin-screw air compressor
Dimensions
1900*seven-hundred*1650mm
Installation technique
Set set up with out basis
Rated displacement
1.16m3/min
Rated exhaust stress
1.58Mpa
Exhaust oil material
≤0.003 ppm
Exhaust stress dew position
2~10°C
Compression phases
Single-phase
Transfer strategy
belt
Compression oil use
8L
Cooling strategy Air cooling
Cooling air quantity 3500 m3/h
Ambient temperature
~ 45°C
Noise
≤65 dB
Fat
560kg

Application industry
Task Case
About usDehaha Compressor was founded in 1996 with in excess of a hundred and fifty experienced staff and a lot more than twenty five R& high quality cnc aluminum motorbike sprocket security motor chain guard circumstance cover for CZPT m-slaz150xabre150 D engineersteams ’ .We emphasis on the research & build,manufacture and vitality-preserving remedies of screw air compressor to generate benefit for consumers and modern society.In 2018 our total revenue quantity approached fifteen million US bucks.By above 23 yearsenhanced activities of creating,creating and marketing,these days our valued clients are more than one hundred thirty international locations.
Germany Common and 13 a long time exporting encounter support us won more than 50 faithful abroad agents.
Dehaha’s principal firms concentrate in pursuing important locations: Oil-injected rotary screw compressors Moveable screw air compressors Oil cost-free air compressors Large force air compressors Air therapy gear

At Dehaha,we receive our customers’ trust and satisfaction by producing the outstanding good quality compressed airproducts for all industries.All of our products are created for trustworthy efficiency,effortless servicing,and maximumenergy effectiveness.We have sales reps who can converse English,Spanish,French,and Russian which makesit easier for our clients from all more than the globe to interact and negotiate with us.

Dehaha continually innovates merchandise advancement and administration to meet customers’ demand from customers.The powerful company tradition and steady innovation make CZPT improved rapidly to attain the company theory”Strength Conserving Very first, Mutual Worth Shared”. CZPT mission is to be a world-renowned large-finish manufacturer,with sustainable growth, Aftermarket Motorbike Accent Aluminum Sprocket Protect for KTM DUKE constantly bettering its very own value and sharing it with our buyers and personnel.Committed to offer you our buyers a silent and vitality-conserving produced items.
Why pick us FAQ

How to Choose the Right Air Compressor

An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
air-compressor

Electric motor

While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with two digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
air-compressor

Oil bath

Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.

Start/stop control

An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
air-compressor

Variable speed drive

A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between forty percent and eighty percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.

China 16bar High Pressure Integrated Screw Air Compressor For Laser Cutting Machine     mini air compressorChina 16bar High Pressure Integrated Screw Air Compressor For Laser Cutting Machine     mini air compressor
editor by czh 2023-02-09

China Mini 1pk Gse Oil Free Silent Dental Air Compressor with Hot selling

Solution Description

Mini 1PK GSE Oil Free Silent Dental Air Compressor
Features&Positive aspects:

1.Good quality, bottom price

two.High reliable and durable valve strong aluminum alloy body.

three.Cylinder:made of high-grade Aluminium, strength, good lubricity.

4.OEM is accepted

 

Specs:

Voltage

220V/110V

Ampere

two.55A

Power

550W

Frequency

50HZ/60HZ

Exhaust rate

70L/min

Rated exhaust pressure

.8Mpa

Sounds

55-62dB

Bottle dimension

32L

Far more types for you reference

FAQ: 
1. Q: Are you a factory or trading business? 
A: We are manufacturing unit.We make dental chair,dental air compressor and xray equipment,and it really is approved CE certificated. 

two. Q: The place is your factory situated? How can I visit there? 
A: Our factory is located in HangZhou City,ZheJiang Province,China,near HangZhou.You can fly to Xihu (West Lake) Dis. airport,you can take tax or metro to HangZhou straight.All our clients,from property or abroad,are warmly welcome to pay a visit to us! 

three. Q: How can I get Fob or C&F price? 
A: Generally creation time of items is from 2 week to 1 month depending on the amount requested. If you are sourcing a product, our representative will give you certain data with regards to the guide time. If you require a rush purchase, speak to our representatives to go over your distinct demands. 

four. Q: How long is my warranty and what does it include? 
A: Have the entire 1 yr company warranty. Each and every guarantee period of time commences at the date of shipping date and finishes following 1 yr. The warranty may differ by choice things and producer All warranty statements will be void owing to neglect, deficiency of maintenance, and/or incorrect managing. 

5. How can I get the soon after sevice? How can I get the spare element following 1 year guarantee? 
A: We welcome your chats online (Chat or leave concept: Soon after services) or e-mail to us regarding any technological or associated queries that you may have. And we will provide some totally free sparts for container buy. We gurantee maintain dental chair units spare areas supply. 

If you want to know more data about our items welcome to get in touch with us in any time, And welcome to our company! 

Get in touch with
Speak to person: Allen Music
 

US $145-280
/ Piece
|
1 Piece

(Min. Order)

###

Applicable Departments: Oral Surgery
Certification: ISO, CE
Type: Cleaning & Filling Teeth Equipments
Material: Aluminum
Power: for One Chair
Certificate: CE

###

Samples:
US$ 165/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Voltage

220V/110V

Ampere

2.55A

Power

550W

Frequency

50HZ/60HZ

Exhaust rate

70L/min

Rated exhaust pressure

0.8Mpa

Noise

55-62dB

Bottle dimension

32L

US $145-280
/ Piece
|
1 Piece

(Min. Order)

###

Applicable Departments: Oral Surgery
Certification: ISO, CE
Type: Cleaning & Filling Teeth Equipments
Material: Aluminum
Power: for One Chair
Certificate: CE

###

Samples:
US$ 165/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Voltage

220V/110V

Ampere

2.55A

Power

550W

Frequency

50HZ/60HZ

Exhaust rate

70L/min

Rated exhaust pressure

0.8Mpa

Noise

55-62dB

Bottle dimension

32L

what to see in an air compressor

If you need to buy an air compressor, you should know what to look for. The types of air compressors on the market are classified according to their CFM rating, safety devices, and pumps. There are several differences between lubricated and oil-free air compressors that you should know before buying. To better understand the difference between these types of air compressors, read on. This article will guide you through these differences.

Pump

If you are looking for a quality air compressor, you have come to the right place. A good air compressor pump will provide high pressure for anything from tires to boats and more. There are hundreds of different models to choose from, and the great thing about buying one from a Chinese manufacturer is that they have so many options. More importantly, Chinese manufacturers can customize air equipment such as air compressors at low prices.
A good quality air pump won’t break easily, but you’ll be able to use it for years. Choosing a high-quality pump will help you avoid many hassles on the road, such as unplanned downtime and installation costs. Plus, a pump from the same manufacturer as your air compressor is your best bet to ensure optimum performance. Listed below are some tips for finding a quality pump for your air compressor.
The air compressor is an important but unremarkable invention. Without them, our lives would be completely different. Without a pump, we can’t get hot water from central heating, nor can we get heat from the refrigerator. We can’t inflate bicycle tires, and we can’t refuel cars. Pumps are vital to all kinds of machines. So why is it important to choose the right product? The answer may surprise you.
Different types of pumps are used for different applications. Positive displacement pumps move a fixed volume of fluid and direct it to a drain. This design ensures constant flow at a constant speed regardless of discharge pressure. Centrifugal pumps work differently. The impeller accelerates the fluid, converting the input energy into kinetic energy. This type of pump is most commonly used in mines, air conditioning, industrial plants, and flood control.
air-compressor

safety equipment

There are several safety features you should check when using an air compressor. First, check the connection of the air filter to the air. If they come loose, parts may separate and cause injury. Another important safety feature is the shut-off valve. When working near compressed air, the shut-off valve should be within easy reach and visibility. Moving parts and other equipment must be protected with protective covers. Check safety valve and replace damaged parts.
Rupture discs are copper discs located on the air cooler. When the air pressure exceeds a certain limit, it bursts. Fusible plugs contain materials that melt at high temperatures. The compressor should have a lubricating oil pressure alarm and cut off the trip signal. If these two safety devices fail, the compressor should be stopped immediately. The rupture disc should be inspected at least weekly to ensure it does not rupture under pressure.
If the pressure level is too high, and overcurrent protection device cuts power to the motor. It also automatically shuts off the compressor when the hose ruptures or the air volume exceeds a preset level. The device should be installed on the air compressor to prevent accidents. Its job is to protect the operator from harm. If employees do not follow these safety measures, they may cause equipment damage.
To ensure safety when operating the air compressor, safety glasses and gloves should be worn. Pressurized air can cause eye injury, and crash goggles can provide a barrier to prevent this. Additionally, the self-retracting cord prevents trip hazards and reinforces excess cord. You should also keep your hands and body away from the air nozzle. This will prevent you from being sprayed with compressed air.

CFM Rating

An air compressor’s PSI and CFM ratings indicate the pressure and volume it can deliver. PSI stands for pounds per square inch and measures the force and pressure contained in one square inch of air. These two indicators are equally important when choosing an air compressor. If you need a lot of compressed air for a specific application, you will need a higher psi compressor. Likewise, if you are using compressed air in a smaller application, a low cfm compressor will not provide enough power to meet your needs.
When comparing different air compressors, be sure to pay close attention to horsepower and CFM ratings. While compressor power is essential for some tasks, it is not the most important aspect. The CFM rating of an air compressor will determine how big a project it can handle and how long it takes to charge. Make sure you understand the CFM and PSI ratings of your future compressors, as not knowing these important statistics can frustrate you and drive up costs.
In general, it is best to choose an air compressor with a CFM rating higher than the size of the air tool. This will ensure that the air compressor has enough pressure to work multiple tools efficiently at the same time. While smaller CFM ratings may be sufficient for smaller projects, larger tools such as drills require a lot of air. Therefore, the higher the CFM, the larger and more powerful the tool.
Once you understand the CFM of an air compressor, you can start looking for the right tool. You can check the CFM rating of your air compressor online by commenting below. If you’re not sure about the size of your air tool, you can always buy a second air compressor. This is a great way to double the CFM of your air compressor! You’ll have more air to do more work, and your compressor will last longer.
air-compressor

Lack of oil and lubrication

Oil-free air compressors have a smaller footprint and require less maintenance than oil-lubricated air compressors. Although oil-lubricated air compressors are more expensive and heavier than oil-free air compressors, they are also ideal for stationary use. The benefits of oil-free air compressors include greater durability and lower maintenance costs. The advantages and disadvantages of each type are discussed below.
Oil-free air compressors are generally quieter than oil-lubricated air compressors. However, you may still experience some noise while using it. To avoid this, you should choose a quiet intake compressor. However, if you work next to a noisy compressor, you should buy a muffler, an aftermarket filter that reduces compressor noise.
If you want to use the air compressor for a long time, the oil-free model is not the right choice. Its Teflon coating wears off over time, especially at extreme temperatures. Additionally, oil-free air compressors have a large number of moving parts that require regular maintenance, while oil-filled air compressors are great for those who don’t want to invest in extra parts.
Another major difference between oil-free and oil-lubricated air compressors is lubrication. Oil-lubricated air compressors require regular lubrication whereas oil-free air compressors are pre-lubricated. They have fewer parts and are cheaper. Oil-free air compressors are lighter than oil-lubricated air compressors. In addition to being more affordable, oil-free air compressors are more powerful and durable.
While oil-filled air compressors are more efficient and durable, they generate a lot of heat. However, they are also more expensive and require regular oil changes. Furthermore, they are difficult to transport. They also need to be permanently installed. These air compressors are also not portable and require a fixed location. So, consider your needs before deciding which type is best for you. When you’re choosing an air compressor for your business, be sure to shop around.
air-compressor

noise level

If you are wondering what the noise level of an air compressor is, the answer depends on your specific equipment and working environment conditions. Typically, air compressors produce 40 to 90 decibels of noise. Although the lower the decibel level, the quieter the compressor will be. Larger, more powerful air compressors produce higher noise levels than their little brothers. But no matter how big the air compressors are, it’s a good idea to wear hearing protection while working around them.
When purchasing a new air compressor, the noise level of the air compressor should be considered. While this may seem like a small problem, there are actually a lot of variations on these noisy machines. The most common type of air compressor is the reciprocating piston pump. This model uses pistons similar to an engine to rotate inside a chamber. The piston moves quickly and traps air proportional to its size. Single-piston air compressors are generally noisier than twin-piston models, also known as twin cylinders.
But even if you have the proper equipment to protect your hearing, it’s still important to know the noise level of an air compressor. Even if the noise is not immediately dangerous, it can still cause temporary or permanent hearing loss. This condition is called noise-induced hearing loss, and an air compressor with a sound level of 80 or higher can cause permanent hearing damage. You can avoid potential damage to your hearing and prevent accidents by simply paying attention to the noise level of your air compressor.
Air compressors are inherently noisy, but if you take steps to reduce their noise levels, you can minimize disruption to neighbors and co-workers. For example, installing a sound enclosure in your work area can prevent your air compressor from making as much noise as before. Depending on your workspace, you can also try installing a long air hose, which will reduce sound levels by up to 25%.
China Mini 1pk Gse Oil Free Silent Dental Air Compressor     with Hot sellingChina Mini 1pk Gse Oil Free Silent Dental Air Compressor     with Hot selling
editor by czh 2023-01-31

China Industrial High Pressure Natural Gas Compressor with Dryer, Air Tank and Filters-Type D mini air compressor

Product Description

Solution Description

The center physique amongst the slide and the cylinder can be created in accordance to user specifications for lengthy one chamber, limited one chamber, prolonged double chamber, prolonged and limited double chamber structure The drinking water cooling system is adopted, and all stages are geared up with intake and exhaust buffers and separators The lubrication program adopts a lean oil station, there are 2 sets of lubrication programs, when the oil strain is low, the auxiliary oil pump program immediately starts off operating. All equipment is integrated on the skid-mounted base, with compact framework, great sealing, tiny beginning torque, excellent balance of inertia power, small mechanical vibration, high dependability, simple routine maintenance, long support lifestyle and other qualities.

The machine is tailored according to client need to have, the distinct price is dependent on the configuration needs (fuel composition, exhaust volume and pressure).

In depth Photos

Item Parameters

Model Exhaust Quantity
m3/min
Number of phases/Cylinders Rotational velocity
r/min
Inlet pressure
MPa
Exhaust Strain
MPa
Equipped with energy Drive Electrical power
(KW)
Dimensions
mm×mm ×mm
DW-40/eight 40 2/2 740 .7(.8) JSL400-8 250 3000×2600×1700
DW-80/2 eighty 1/2 730 .two Y355L-eight 250 3000×1100×900
DW-1/.5-15 1 two/two 730 .05 one.five YB200L-eight 15 1870×1700×1350
DW-seventeen/1.5-4.five seventeen one/2 730 .15 .45 JBQ400M-12 a hundred and sixty 3700×3100×1790
DW-1/.02-fifteen 1 2/2 730 .002 1.5 YB180L-eight 11 1870×826×1300
DW-1/2-sixteen one 2/two 730 .2 one.6 YB225S-B 11 2000×1700×1100
DW-1/5-20 one two/two 730 .five two YB250L-eight eighteen.5 2000×1775×1300
DW-1/.02-25 one 2/2 730 .002 two.five YB200L-8 fifteen 1870×1700×1050
DW-.3/20-50 .3 2/2 730 two 5 YB225M-eight 22 1650×2400×930
DW-1.65/4-22.five one.sixty five two/2 730 .four two.twenty five YA280M-eight 22 1700×2040×1200
DW-2.8/(3~5)-28 2.8 one/two 740 .3~.5 two.eight YB2-315L1-eight ninety 4400×2500×2100
DW-35/1-6 35 1/two 740 .one .6 YB355L 280 4400×2500×2100
DW-twelve.78/4-31.eight twelve.7 2/2 485 .4 3.eighteen YB710-12 355 7200×5500×3000
D-.08/250-500 .08 one/two 1000 25 50 TAD620VE a hundred thirty five 6000×2300×2550
DWWJD-3/(~.2)-seven three two/2 740 ~.02 .7 YB250M-8 30 5000×2300×2400
DW-thirteen/4.7-26 thirteen 2/2 485 .47 two.six YB2-500-twelve 315 6200×5270×2825
DW-37/4-9 37 one/two 485 .four .nine YAKK-560-twelve 355 6200×7745×3150
D-4.2/(3~6)-250 four.two 4/4 740 .3~.6 twenty five YB2-400L-eight 375 6000×4700×2950
D-2.4/(sixteen-23)-210 two.4 3/four 740 one.6~2.three 21 YB2-450-eight 355 5000×3500×2500
D-2.5/(twelve~fourteen)-250 2.5 three/four 740 1.2~1.4 25 YB2-400L-8 250 5000×3500×2000
DF-1.12/seventeen-250 one.12 three/three 740 1.seven 25 YB2-355M-8 one hundred sixty 4000×3500×2900
DW-5/(.05~.1)-fifteen 5 two/two 740 .005~.01 1.5 YBP2-315S-eight fifty five 3716×2334×1495
DF-1.4/(sixteen~twenty)-250 one.four 3/four 585 1.6~two 25 YB2-400M-10 two hundred 4000×3500×2910
DF-3.5/(7~ten)-250 3.five three/seven 740 .7~1 twenty five T12V190ZL-2 550 6600×4300×2500
D-1.7/(35-40)-210 1.seven two 740 three.5~4 21 YB2-450-8 355 5500×4200×1900
DF-.32/35-250 .32 2/four 740 3.5 twenty five YB2-315M-eight seventy five 2500×2500×2300
D-1.65/(25~35)-210 one.65 two 740 two.5~3.five 21 YB2-450M-8 355 6500×4300×1900
D-twelve.5/.05-five 12.5 2/2 740 .005 .5 YB2-315M-eight 75 4300×2590×1700
DW-2.5/3-twelve two.5 one/two 740 .3 one.2 YBP2-280S-8 37 4000×2300×1900
DF-2.5/(12~fourteen)-250 2.5 3/four 740 1.2~1.four twenty five YB2-450S-8 37 5000×4300×1800
DF-2.8/(8~16)-250 2.8 3/four 740 .8~1.6 25 YB2-450L-eight 355 5500×4300×1800
D-1/(twenty five~35)-250 1 2/two 740 two.5~3.five 25 YB-355L2-8 two hundred 5500×3300×1600
D-1.3/(60~eighty five)-250 1.three 2/4 740 6~8.five 25 YB2-450M-8 355 6500×4300×1900

Company Profile

 

Certifications

 

After Sales Services

1.Swift response within 2 to 8 hours, with a response rate exceeding ninety eight%
2. 24-hour telephone services, please truly feel free of charge to make contact with us
3. The whole device is confirmed for 1 12 months (excluding pipelines and human factors)
4. Offer consulting support for the service existence of the entire equipment, and give 24-hour technical assistance by way of e mail
5. On-site installation and commissioning by our knowledgeable technicians

FAQ

one) Are you manufacturing unit?
Completely! You have touched the major resources of Cng organic gasoline/Lpg/Co2/Ammoina Compressor. We are manufacturing facility.

2) Can you customise generate compressor?
Confident, you need explain to us some below details then we can give you a professional manufacture design and style program supplying
A. The gas compression medium
B. The flow price: _____Nm3/hr
C. Inlet pressure: _____ Bar
D. Discharge stress: _____ Bar
E. Inlet temperature
F. Outlet temperature (if you demanding for air cooling or h2o cooling)

3) What is your shipping time?
Typically compressor with 30-85 days

four) How lengthy could your air compressor be used?
Normally, more than 20 a long time.

five) How extended is your compressor guarantee?
Typically 1 calendar year /12 Months for total compressor device. And we can offer even more guarantee if required.

US $12,030-48,731
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Whole Life After Sale Service
Warranty: 1 Year
Lubrication Style: Oil-less
Cooling System: Air Cooling
Cylinder Arrangement: Balanced Opposed Arrangement
Cylinder Position: Horizontal

###

Customization:

###

Model Exhaust Volume
m
3/min
Number of stages/Cylinders Rotational speed
r/min
Inlet pressure
MPa
Exhaust Pressure
MPa
Equipped with power Drive Power
(KW)
Dimensions
mm×mm ×mm
DW-40/8 40 2/2 740 0 0.7(0.8) JSL400-8 250 3000×2600×1700
DW-80/2 80 1/2 730 0 0.2 Y355L-8 250 3000×1100×900
DW-1/0.5-15 1 2/2 730 0.05 1.5 YB200L-8 15 1870×1700×1350
DW-17/1.5-4.5 17 1/2 730 0.15 0.45 JBQ400M-12 160 3700×3100×1790
DW-1/0.02-15 1 2/2 730 0.002 1.5 YB180L-8 11 1870×826×1300
DW-1/2-16 1 2/2 730 0.2 1.6 YB225S-B 11 2000×1700×1100
DW-1/5-20 1 2/2 730 0.5 2 YB250L-8 18.5 2000×1775×1300
DW-1/0.02-25 1 2/2 730 0.002 2.5 YB200L-8 15 1870×1700×1050
DW-0.3/20-50 0.3 2/2 730 2 5 YB225M-8 22 1650×2400×930
DW-1.65/4-22.5 1.65 2/2 730 0.4 2.25 YA280M-8 22 1700×2040×1200
DW-2.8/(3~5)-28 2.8 1/2 740 0.3~0.5 2.8 YB2-315L1-8 90 4400×2500×2100
DW-35/1-6 35 1/2 740 0.1 0.6 YB355L 280 4400×2500×2100
DW-12.78/4-31.8 12.7 2/2 485 0.4 3.18 YB710-12 355 7200×5500×3000
D-0.08/250-500 0.08 1/2 1000 25 50 TAD620VE 135 6000×2300×2550
DWWJD-3/(0~0.2)-7 3 2/2 740 0~0.02 0.7 YB250M-8 30 5000×2300×2400
DW-13/4.7-26 13 2/2 485 0.47 2.6 YB2-500-12 315 6200×5270×2825
DW-37/4-9 37 1/2 485 0.4 0.9 YAKK-560-12 355 6200×7745×3150
D-4.2/(3~6)-250 4.2 4/4 740 0.3~0.6 25 YB2-400L-8 375 6000×4700×2950
D-2.4/(16-23)-210 2.4 3/4 740 1.6~2.3 21 YB2-450-8 355 5000×3500×2500
D-2.5/(12~14)-250 2.5 3/4 740 1.2~1.4 25 YB2-400L-8 250 5000×3500×2000
DF-1.12/17-250 1.12 3/3 740 1.7 25 YB2-355M-8 160 4000×3500×2900
DW-5/(0.05~0.1)-15 5 2/2 740 0.005~0.01 1.5 YBP2-315S-8 55 3716×2334×1495
DF-1.4/(16~20)-250 1.4 3/4 585 1.6~2 25 YB2-400M-10 200 4000×3500×2910
DF-3.5/(7~10)-250 3.5 3/7 740 0.7~1 25 T12V190ZL-2 550 6600×4300×2500
D-1.7/(35-40)-210 1.7 2 740 3.5~4 21 YB2-450-8 355 5500×4200×1900
DF-0.32/35-250 0.32 2/4 740 3.5 25 YB2-315M-8 75 2500×2500×2300
D-1.65/(25~35)-210 1.65 2 740 2.5~3.5 21 YB2-450M-8 355 6500×4300×1900
D-12.5/0.05-5 12.5 2/2 740 0.005 0.5 YB2-315M-8 75 4300×2590×1700
DW-2.5/3-12 2.5 1/2 740 0.3 1.2 YBP2-280S-8 37 4000×2300×1900
DF-2.5/(12~14)-250 2.5 3/4 740 1.2~1.4 25 YB2-450S-8 37 5000×4300×1800
DF-2.8/(8~16)-250 2.8 3/4 740 0.8~1.6 25 YB2-450L-8 355 5500×4300×1800
D-1/(25~35)-250 1 2/2 740 2.5~3.5 25 YB-355L2-8 200 5500×3300×1600
D-1.3/(60~85)-250 1.3 2/4 740 6~8.5 25 YB2-450M-8 355 6500×4300×1900
US $12,030-48,731
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Whole Life After Sale Service
Warranty: 1 Year
Lubrication Style: Oil-less
Cooling System: Air Cooling
Cylinder Arrangement: Balanced Opposed Arrangement
Cylinder Position: Horizontal

###

Customization:

###

Model Exhaust Volume
m
3/min
Number of stages/Cylinders Rotational speed
r/min
Inlet pressure
MPa
Exhaust Pressure
MPa
Equipped with power Drive Power
(KW)
Dimensions
mm×mm ×mm
DW-40/8 40 2/2 740 0 0.7(0.8) JSL400-8 250 3000×2600×1700
DW-80/2 80 1/2 730 0 0.2 Y355L-8 250 3000×1100×900
DW-1/0.5-15 1 2/2 730 0.05 1.5 YB200L-8 15 1870×1700×1350
DW-17/1.5-4.5 17 1/2 730 0.15 0.45 JBQ400M-12 160 3700×3100×1790
DW-1/0.02-15 1 2/2 730 0.002 1.5 YB180L-8 11 1870×826×1300
DW-1/2-16 1 2/2 730 0.2 1.6 YB225S-B 11 2000×1700×1100
DW-1/5-20 1 2/2 730 0.5 2 YB250L-8 18.5 2000×1775×1300
DW-1/0.02-25 1 2/2 730 0.002 2.5 YB200L-8 15 1870×1700×1050
DW-0.3/20-50 0.3 2/2 730 2 5 YB225M-8 22 1650×2400×930
DW-1.65/4-22.5 1.65 2/2 730 0.4 2.25 YA280M-8 22 1700×2040×1200
DW-2.8/(3~5)-28 2.8 1/2 740 0.3~0.5 2.8 YB2-315L1-8 90 4400×2500×2100
DW-35/1-6 35 1/2 740 0.1 0.6 YB355L 280 4400×2500×2100
DW-12.78/4-31.8 12.7 2/2 485 0.4 3.18 YB710-12 355 7200×5500×3000
D-0.08/250-500 0.08 1/2 1000 25 50 TAD620VE 135 6000×2300×2550
DWWJD-3/(0~0.2)-7 3 2/2 740 0~0.02 0.7 YB250M-8 30 5000×2300×2400
DW-13/4.7-26 13 2/2 485 0.47 2.6 YB2-500-12 315 6200×5270×2825
DW-37/4-9 37 1/2 485 0.4 0.9 YAKK-560-12 355 6200×7745×3150
D-4.2/(3~6)-250 4.2 4/4 740 0.3~0.6 25 YB2-400L-8 375 6000×4700×2950
D-2.4/(16-23)-210 2.4 3/4 740 1.6~2.3 21 YB2-450-8 355 5000×3500×2500
D-2.5/(12~14)-250 2.5 3/4 740 1.2~1.4 25 YB2-400L-8 250 5000×3500×2000
DF-1.12/17-250 1.12 3/3 740 1.7 25 YB2-355M-8 160 4000×3500×2900
DW-5/(0.05~0.1)-15 5 2/2 740 0.005~0.01 1.5 YBP2-315S-8 55 3716×2334×1495
DF-1.4/(16~20)-250 1.4 3/4 585 1.6~2 25 YB2-400M-10 200 4000×3500×2910
DF-3.5/(7~10)-250 3.5 3/7 740 0.7~1 25 T12V190ZL-2 550 6600×4300×2500
D-1.7/(35-40)-210 1.7 2 740 3.5~4 21 YB2-450-8 355 5500×4200×1900
DF-0.32/35-250 0.32 2/4 740 3.5 25 YB2-315M-8 75 2500×2500×2300
D-1.65/(25~35)-210 1.65 2 740 2.5~3.5 21 YB2-450M-8 355 6500×4300×1900
D-12.5/0.05-5 12.5 2/2 740 0.005 0.5 YB2-315M-8 75 4300×2590×1700
DW-2.5/3-12 2.5 1/2 740 0.3 1.2 YBP2-280S-8 37 4000×2300×1900
DF-2.5/(12~14)-250 2.5 3/4 740 1.2~1.4 25 YB2-450S-8 37 5000×4300×1800
DF-2.8/(8~16)-250 2.8 3/4 740 0.8~1.6 25 YB2-450L-8 355 5500×4300×1800
D-1/(25~35)-250 1 2/2 740 2.5~3.5 25 YB-355L2-8 200 5500×3300×1600
D-1.3/(60~85)-250 1.3 2/4 740 6~8.5 25 YB2-450M-8 355 6500×4300×1900

What to Look For When Buying an Air Compressor

An air compressor is a very useful tool that can help you complete many different types of construction jobs. This handy machine makes many tasks much easier, but not all of them are created equally. Understanding what to look for when buying an air compressor will help you make an informed decision. Here are some of the things you should look for. These include price, size, and energy efficiency. Also, make sure to consider the air compressor’s type.
air-compressor

Single-stage air compressors are quieter

When it comes to noise level, single-stage air compressors are the way to go. These machines have fewer moving parts and are quieter than two-stage models. Single-stage air compressors use an axial flow design and can be quieter than their dual-stage counterparts. Single-stage air compressors can run longer and at lower pressures. Single-stage air compressors can be used for light industrial applications. They have a long life expectancy, with some models lasting for over three thousand hours.
While some single-stage air compressors are quieter than two-stage air compressors, both models have noise-reduction features. One type features rubber parts, which are designed to dampen noise. Another feature makes a compressor quieter: its location near the job site. Some models feature rubber base plugs and rubber mats to reduce floor vibrations. In addition to using these features, single-stage compressors are easier to transport.
Noise levels are important when choosing an air compressor. Some machines are too noisy for comfortable work, and some businesses don’t want to expose customers to noise-generating air compressors. Other noise levels can even endanger workers’ health. Single-stage air compressors are more affordable than dual-stage compressors. They are also quieter and more powerful. But be prepared for the noise. Some single-stage air compressors are still noisy.
Compared to their two-stage counterparts, single-stage compressors are quieter when running at full capacity. However, double-stage compressors are quieter on low capacities than single-stage units. Those with variable speed are quietest at lower capacities. The difference is about 10db. If you’re concerned about the noise level, you should consider a two-stage air compressor. But if you have a small workshop, it may not be suitable for you.
One-stage air compressors are generally more efficient than two-stage air compressors. The noise from a two-stage air compressor is lower because there’s no intermediate stage. Single-stage air compressors also use a piston that rotates in a single stage, while dual-stage air compressors, also known as duplex models, are more efficient. A single-stage air compressor is quieter, but double-stage compressors are louder.
air-compressor

Two-stage air compressors are more energy efficient

Two-stage air compressors are more energy-efficient than single-stage machines. The efficiency of two-stage air compressors is increased through a combination of improved efficiency and increased longevity. These machines can store more air and have higher compression ratios. One model of a two-stage compressor can hold approximately 83 cubic feet of air at 100 PSI and 120 cubic feet at 150 PSI. A two-stage compressor is also quieter.
Two-stage air compressors are more energy-efficient because they have two pistons instead of one. These air compressors achieve a higher pressure rating and recover more quickly. This type of compressor is perfect for jobs that require high air pressure for a prolonged period of time. In addition, they can operate multiple tools simultaneously. This makes them better for commercial and industrial use. Listed below are some benefits of two-stage air compressors.
Single-stage air compressors can power tools in the garage or kitchen, but they are not as reliable for industrial applications. Single-stage compressors have larger parts that tend to experience condensation. Furthermore, single-stage compressors do not last long in continuous use and are less energy-efficient than two-stage ones. Whether you’re using the compressor for a single tradesperson, a small crew, or a large construction crew, two-stage compressors are the best choice.
Single-stage air compressors are often used in small-scale food preparation and production. Single-stage air compressors are easy to transport between locations, and can be plugged into several electrical outlets. Single-stage compressors are also ideal for high-volume food processing. A dual-stage air compressor is ideal for industrial use. In some cases, you can even move the single-stage air compressor between two-stage air compressors.
Single-stage compressors often cycle too quickly, drawing more electricity than two-stage units. A variable speed unit stays on a low speed for hours at a time. Single-stage air conditioners force you to lower your thermostat settings while single-stage air conditioners run too often. Both units are energy-efficient but they are not as energy-efficient as variable-speed compressors. The main difference is that single-stage air conditioners tend to drain the power source quicker.

Piston-driven air compressors are quieter

A piston-driven air compressor is one of the quietest types of air compressors. It is less noisy than reciprocating air compressors. A piston-driven air compressor can reach 62 decibels, while a scroll compressor is around half that volume. The two main components of a scroll air compressor are the piston and the helical screw. These air compressors are both very efficient and quiet.
Older compressors are incredibly noisy. They produce a “wumpa” noise similar to a large engine. They are also capable of producing a high-pitched whine. These noises can be deafening, especially in a small workshop. That’s why it’s essential to look for a quiet compressor. But what makes a compressor quiet? Read on to learn more about this essential tool.
Another difference between piston-driven air compressors and electric-driven air compressors is the power source. Electric air compressors produce less noise than gas-powered compressors, which use an engine. Piston-driven air compressors are also more efficient. They also generate less heat, making them an ideal choice for offices and other settings where noise is a problem. The best way to decide between the two types of air compressors is to check the manufacturer’s warranty and read the ‘Description’.
Noise reduction is the first priority of a compressor’s owner, so make sure that you have the right model. If you’re working on something sensitive, don’t place the compressor too close to a building where people might be nearby. Noise can be very disruptive to the workspace and can cause health problems. To help combat noise, you’ll need to buy a quiet air compressor. And don’t forget to consider its location: Piston-driven air compressors are quieter than their reciprocating counterparts.
Piston-driven air compressors are quiet because the piston is made of thin metal and more rubber, which absorbs the sound. Unlike reciprocating air compressors, piston-driven air compressors are more efficient than their dual-piston cousins, which are quieter and more powerful. So which type is right for you? Take a look at some of the main differences between the two. If you want a quiet compressor, make sure it meets the specifications required by the job you’re working on.
air-compressor

Oil-lubricated air compressors are more cost-effective

There are several reasons why oil-lubricated air compressors are more expensive than dry-type air compressors. First of all, oil-lubricated air compressors tend to be more reliable and quiet. Additionally, oil-lubricated air compressors require fewer parts and can last longer than dry-type air compressors. These are just a few of the many benefits of using oil-lubricated air compressors.
Oil-free air compressors have some disadvantages. They are less durable and may not be as efficient as oil-lubricated models. Additionally, because oil-lubricated air compressors use oil, they can get very noisy. While they are less expensive, they are not the best option for heavy-duty work. However, modern oil-free air compressors have soundproofing and are suitable for industrial use.
When purchasing an oil-lubricated air compressor, make sure to choose one with a tank capacity that meets your needs and your space. Larger tanks can be more expensive than small tanks, but larger units are easier to move around. Also, be sure to consider the weight and size of the portable air compressors when making your choice. If the weight is too large, you may have trouble carrying it from place to place.
Another benefit of using oil-lubricated air compressors is their reduced need for oil. These models can last up to a decade longer than oil-free counterparts. Oil-free air compressors are more affordable and can achieve the same high performance as their oil-lubricated counterparts. Many industrial applications benefit from these air compressors. So, which one is right for you? We’ve listed a few of them below.
Another benefit of choosing an oil-lubricated air compressor is the reduced cost of maintenance. This type is more durable than its oil-lubricated counterparts, which require regular oil changes to keep them running smoothly. However, it is not feasible to transport an oil-lubricated compressor, which means that you must install it permanently to keep it working efficiently. In addition, these air compressors are difficult to move and are not portable, which can limit your ability to use it in a pinch.

China Industrial High Pressure Natural Gas Compressor with Dryer, Air Tank and Filters-Type D     mini air compressorChina Industrial High Pressure Natural Gas Compressor with Dryer, Air Tank and Filters-Type D     mini air compressor
editor by czh 2023-01-28