China Permanent Magnet Screw Compressor New Design Energy Saving 22kw 30HP Screw Compressor Vertical Pm VSD Air Compressor manufacturer

Item Description

 Permanent-Magnet Variable Frequency Screw Compressor

♦ Clever Contact-Display Design and style

♦ Immediate-driven

♦ Air Cooling

♦ Oil Filter

♦ Air Filter 

♦ Stainless Steel

♦ Piping Style

Product features
A single shaft kind composition
1. Permanent magnet motor and airend use the embedded built-in Shaft connecting structure, more compact, a hundred% transmission Performance.
two. No motor bearings, reducing the motor bearing fault points. Different speeds, long lasting magnet
 
 
motor with high efficiency, Remarkable power-conserving effect
1. At rated pace point, everlasting magnet motor performance is higher Than ordinary motors.
2. Under low motor pace, long lasting magnet motor can nevertheless hold large Motor efficiency. If the fuel consumption significantly less, it nonetheless keeps extremely Higher performance. In contrast with common frequency conversion
three: Motor, the motor efficiency seems obvious hole and the air Compressor has powerful power saving
It has the integrated composition, configuration of high efficiency Long lasting magnet motor, little measurement, preserving room, simple disassembly. Deloying productive everlasting magnet variable frequency controllor, it Small quantity, low sounds Can change the pace of the permanent magnet motor in accordance to The exhaust quantity, it will achieve lower procedure sound than regular Kinds.
four. Long lasting magnet motor has high efficiency NdFeB long term Magnet, a hundred and twenty º Cwithout reduction of excitation, and service life of over fifteen A long time.
five. Stator coil adopts unique inverter corona resistant enamelled wire. Insulation performance and lengthier support life.
6. Noticing comfortable start, the motor present will not exceed the entire load Recent in the course of procedure, and greatly decrease the influence on community Equipment, no damage to electrical products.OSG-EZV collection everlasting magnet compressor Stable procedure.

Energy-preserving advantages:
a. Permanent magnet motor has high efficiency NdFeB long term Magnet, one hundred twenty º Cwithout decline of excitation, and support life of more than fifteen Many years.
b. Stator coil adopts unique inverter corona resistant enamelled wire. Insulation functionality and lengthier support daily life.
c. Noticing delicate begin, the motor present will not exceed the total load Present in the course of operation, and drastically minimize the impact on community Equipment, no harm to electrical tools.OSG-EZV series everlasting magnet compressor
Power-conserving rewards:
 
Issue energy preserving
one: The permanent magnet motor remains higher performance at minimal speeds, making sure Apparent vitality-saving benefits in little air volume.
two: Frequency range from %-100% (frequent conversion from sixty%-100%)
3: Compared with the fastened pace compressor, strength conserving 22%-forty%
four: When compared with the common inverter compressor, strength conserving 5%-15%
five: Method quantity fluctuations greater, then strength-saving influence far more clearly.
6: Vitality conserving program of unloading (inverter):
In accordance to the stationary air compressors in fuel use fluctuation, it has the unloading time, then the air compressor idling but also need forty five% of the Electrical energy, but the long lasting-magnet frequency air compressor will control for Inverter, no unloading and no squander. If the air compressor models grow to be more substantial,
Energy saves much more. Preserve the squandered electric powered power by force handle bandwidth (vitality saving):
Fastened compressor need to set a bare minimum control strain for the 1Barg band (i. E. Air Compressor limits) to steer clear of the effect on the unit and the electrical power grid. Several Machines have to use jointly with a stress gradient, much more wide force, whilst the OSG long lasting-magnet variable-frequency Air compressor collection is inverter control,Endless quit, no need to set stress, but a stress level on the line. The pressureOf every single .14Barg bandwidth, the program can conserve strength 1%.
 
Strength saving startup (inverter):
Air compressor’ s beginning present is 3-6 occasions of the rated current, the frequently Start will squander a great deal of vitality, and frequency conversion kind has no frequent Starting and halting, but gentle commence. The maximum present does not exceed the Rated functioning current, no energy squander. At the same time also greatly lessen the Impact on community gear, and no hurt to electrical equipment OSG company has attained a compressor creation license(certification NO: XK06-571-0571), has received a high quality systemCertificate and basic machinery certification. Solution layout,Producing processes are rigorous in accordance with ISO9001: 2008 good quality method expectations

Product Force
(mpa)
Displacement
(m³/min)
Energy
(kw)
Dimension
(mm)
Fat
(kg)
Outlet Measurement
PV-.7/22 .7  4.2  22 1500*900*1220 700 Rp1″
PV-.8/22 .8  4.1 
PV-1./22 one.0  three.5 
PV-1.3/22 one.3  three.2 
PV-.7/37 .7  7.0  37 1650*1050*1360 900 Rp1 1/2″
PV-.8/37 .8  7.1 
PV-1./37 1.0  5.8 
PV-1.3/37 1.3  5.4 
PV-.7/forty five .7  nine.8  45 1800*1250*1600 1000 Rp2″
PV-.8/45 .8  9.7 
PV-1./45 one.0  seven.8 
PV-1.3/forty five one.3  six.5 
PV-.7/fifty five .7  twelve.2  55 2150*1350*1650 1500 Rp2″
PV-.8/55 .8  twelve.0 
PV-1./55 1.0  nine.6 
PV-1.3/55 one.3  8.6 
PV-.7/75 .7  sixteen.8  75 2250*1350*1760 1800 Rp2″
PV-.8/seventy five .8  sixteen.5 
PV-1./75 1.0  twelve.5 
PV-1.3/seventy five one.3  11.2 
PV-.7/ninety .7  19.8  90 2450*1770*1560 2000 Rp2″
PV-.8/ninety .8  19.2 
PV-1./90 1.0  sixteen.9 
PV-1.3/ninety 1.3  14.3 
PV-.7/one hundred ten .7  23.6  110 2670*1770*1880 2300 Rp2″
PV-.8/a hundred and ten .8  23.1 
PV-1./one hundred ten one.0  19.7 
PV-1.3/a hundred and ten one.3  seventeen.6 
PV-.7/132 .7  30.0  132 2750*1860*1900 2800 Rp3″
PV-.8/132 .8  28.0 
PV-1./132 1.0  23.5 
PV-1.3/132 1.3  19.8 
PV-.7/160 .7  34.5  160 2900*2100*2300 3000 DN125
PV-.8/one hundred sixty .8  33.6 
PV-1./160 one.0  30.0 
PV-1.3/a hundred and sixty one.3  28.3 
PV-.7/185 .7  forty one.0  185 3000*2100*2300 3300 DN125
PV-.8/185 .8  38.4 
PV-1./185 one.0  32.5 
PV-1.3/185 1.3  28.6 
PV-.7/two hundred .7  44.6  200 3300*2000*2280 3500 DN125
PV-.8/two hundred .8  forty three.0 
PV-1./200 1.0  38.5 
PV-1.3/two hundred 1.3  32.8 
PV-.7/220 .7  forty eight.6  220 3500*2200*2340 4000 DN125
PV-.8/220 .8  forty seven.0 
PV-1./220 one.0  forty one.9 
PV-1.3/220 one.3  38.0 
PV-.7/250 .7  55.0  250 3500*2200*2340 4500 DN125
PV-.8/250 .8  fifty four.0 
PV-1./250 one.0  forty six.0 
PV-1.3/250 one.3  forty.0 

 

ZheJiang CZPT Gasoline Compressor Production Co.,Ltd. established in 2005, is a top substantial technological innovation of device and gear manufacturer integrating the design, R&D, generation, sales and provider for air compressors & Mining Products. Adopting superior technologies, style principle and top quality control, and we are CZPT to provide custom-made products to meet up with customers’ OEM demands.
Our firm has much more than 520 workers, like 86 senior technicians and specialist engineers. Our technical team provides our customers with professional air program answers. With the total 15000 sq. meters of the facility, 4 modern day advanced manufacturing lines are developed up to guarantee production capacity to fulfill customer requirements.
Our firm has been awarded the honorary title of “ZheJiang high-tech enterprise” and our items appreciate higher honors in the industry. Our business has the ISO9001 certification and was awarded the qualification certificate of gear by means of military contracts in 2018.
We offer you the following items and providers:
1. Screw air compressor
    1.1 Oil-free of charge screw air compressor
    1.2 Oil-injected air compressor
2. Reciprocating piston air compressor
    2.1 Piston air compressor
    2.2 Oil-cost-free piston air compressor
    2.3 Piston medium & high-pressure air compressor
3.Transportable air compressor & Mining Equipment
    3.1 Diesel or Electric moveable screw air compressor
    3.2 Air Select, Rock Drill, DTH Drilling Rig, Crawler Drilling Rig
four. Air compressor components
    4.1 CZPT or Adsorption compressed air drier
    4.2 Compressed air filter or tank
    4.3 Lubrication oil
We have a complete system of right after-product sales support and quality assurance. The company’s materials obtain, inspection, manufacturing, installation, and testing are strictly in accordance with the ISO procedures. which will guarantee every compressor has trustworthy quality and has a full document to trace, if required.
Q: Do you check all your goods just before shipping and delivery?
A: Indeed, we have one hundred% check prior to supply.

Q: How can we start buy with your manufacturing facility?
A: 1st, depart us an inquiry and advise which merchandise you’re fascinated, and then we will get in touch with you in 24 several hours. You might be so type if supply all in depth details, will far better for us to know just what you require.

Q: What are your MOQ?
A: Diverse products have various MOQ, most is 1 set.

Q: What is your phrases of payment?
A: T/T thirty% as deposit, and 70% ahead of supply. We are going to show you the photos of the merchandise and offers.

Q: How about your shipping and delivery time?
A: Generally, it will take ninety times following getting your progress payment. The specific shipping and delivery time depends on the things and the quantity of your get.

Q: Do you a trade business or real factory?
A: We are a hundred% manufacturing facility we situated in ZheJiang city, China.

US $1,000-2,500
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Online Support
Warranty: 1 Years
Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Structure Type: Closed Type

###

Samples:
US$ 1500/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

 Permanent-Magnet Variable Frequency Screw Compressor
♦ Intelligent Touch-Screen Design
♦ Direct-driven
Air Cooling
♦ Oil Filter
♦ Air Filter 
♦ Stainless Steel
♦ Piping Design

###

Model Pressure
(mpa)
Displacement
(m³/min)
Power
(kw)
Dimension
(mm)
Weight
(kg)
Outlet Size
PV-0.7/22 0.7  4.2  22 1500*900*1220 700 Rp1"
PV-0.8/22 0.8  4.1 
PV-1.0/22 1.0  3.5 
PV-1.3/22 1.3  3.2 
PV-0.7/37 0.7  7.0  37 1650*1050*1360 900 Rp1 1/2"
PV-0.8/37 0.8  7.1 
PV-1.0/37 1.0  5.8 
PV-1.3/37 1.3  5.4 
PV-0.7/45 0.7  9.8  45 1800*1250*1600 1000 Rp2"
PV-0.8/45 0.8  9.7 
PV-1.0/45 1.0  7.8 
PV-1.3/45 1.3  6.5 
PV-0.7/55 0.7  12.2  55 2150*1350*1650 1500 Rp2"
PV-0.8/55 0.8  12.0 
PV-1.0/55 1.0  9.6 
PV-1.3/55 1.3  8.6 
PV-0.7/75 0.7  16.8  75 2250*1350*1760 1800 Rp2"
PV-0.8/75 0.8  16.5 
PV-1.0/75 1.0  12.5 
PV-1.3/75 1.3  11.2 
PV-0.7/90 0.7  19.8  90 2450*1770*1560 2000 Rp2"
PV-0.8/90 0.8  19.2 
PV-1.0/90 1.0  16.9 
PV-1.3/90 1.3  14.3 
PV-0.7/110 0.7  23.6  110 2670*1770*1880 2300 Rp2"
PV-0.8/110 0.8  23.1 
PV-1.0/110 1.0  19.7 
PV-1.3/110 1.3  17.6 
PV-0.7/132 0.7  30.0  132 2750*1860*1900 2800 Rp3"
PV-0.8/132 0.8  28.0 
PV-1.0/132 1.0  23.5 
PV-1.3/132 1.3  19.8 
PV-0.7/160 0.7  34.5  160 2900*2100*2300 3000 DN125
PV-0.8/160 0.8  33.6 
PV-1.0/160 1.0  30.0 
PV-1.3/160 1.3  28.3 
PV-0.7/185 0.7  41.0  185 3000*2100*2300 3300 DN125
PV-0.8/185 0.8  38.4 
PV-1.0/185 1.0  32.5 
PV-1.3/185 1.3  28.6 
PV-0.7/200 0.7  44.6  200 3300*2000*2280 3500 DN125
PV-0.8/200 0.8  43.0 
PV-1.0/200 1.0  38.5 
PV-1.3/200 1.3  32.8 
PV-0.7/220 0.7  48.6  220 3500*2200*2340 4000 DN125
PV-0.8/220 0.8  47.0 
PV-1.0/220 1.0  41.9 
PV-1.3/220 1.3  38.0 
PV-0.7/250 0.7  55.0  250 3500*2200*2340 4500 DN125
PV-0.8/250 0.8  54.0 
PV-1.0/250 1.0  46.0 
PV-1.3/250 1.3  40.0 
US $1,000-2,500
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Online Support
Warranty: 1 Years
Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Structure Type: Closed Type

###

Samples:
US$ 1500/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

 Permanent-Magnet Variable Frequency Screw Compressor
♦ Intelligent Touch-Screen Design
♦ Direct-driven
Air Cooling
♦ Oil Filter
♦ Air Filter 
♦ Stainless Steel
♦ Piping Design

###

Model Pressure
(mpa)
Displacement
(m³/min)
Power
(kw)
Dimension
(mm)
Weight
(kg)
Outlet Size
PV-0.7/22 0.7  4.2  22 1500*900*1220 700 Rp1"
PV-0.8/22 0.8  4.1 
PV-1.0/22 1.0  3.5 
PV-1.3/22 1.3  3.2 
PV-0.7/37 0.7  7.0  37 1650*1050*1360 900 Rp1 1/2"
PV-0.8/37 0.8  7.1 
PV-1.0/37 1.0  5.8 
PV-1.3/37 1.3  5.4 
PV-0.7/45 0.7  9.8  45 1800*1250*1600 1000 Rp2"
PV-0.8/45 0.8  9.7 
PV-1.0/45 1.0  7.8 
PV-1.3/45 1.3  6.5 
PV-0.7/55 0.7  12.2  55 2150*1350*1650 1500 Rp2"
PV-0.8/55 0.8  12.0 
PV-1.0/55 1.0  9.6 
PV-1.3/55 1.3  8.6 
PV-0.7/75 0.7  16.8  75 2250*1350*1760 1800 Rp2"
PV-0.8/75 0.8  16.5 
PV-1.0/75 1.0  12.5 
PV-1.3/75 1.3  11.2 
PV-0.7/90 0.7  19.8  90 2450*1770*1560 2000 Rp2"
PV-0.8/90 0.8  19.2 
PV-1.0/90 1.0  16.9 
PV-1.3/90 1.3  14.3 
PV-0.7/110 0.7  23.6  110 2670*1770*1880 2300 Rp2"
PV-0.8/110 0.8  23.1 
PV-1.0/110 1.0  19.7 
PV-1.3/110 1.3  17.6 
PV-0.7/132 0.7  30.0  132 2750*1860*1900 2800 Rp3"
PV-0.8/132 0.8  28.0 
PV-1.0/132 1.0  23.5 
PV-1.3/132 1.3  19.8 
PV-0.7/160 0.7  34.5  160 2900*2100*2300 3000 DN125
PV-0.8/160 0.8  33.6 
PV-1.0/160 1.0  30.0 
PV-1.3/160 1.3  28.3 
PV-0.7/185 0.7  41.0  185 3000*2100*2300 3300 DN125
PV-0.8/185 0.8  38.4 
PV-1.0/185 1.0  32.5 
PV-1.3/185 1.3  28.6 
PV-0.7/200 0.7  44.6  200 3300*2000*2280 3500 DN125
PV-0.8/200 0.8  43.0 
PV-1.0/200 1.0  38.5 
PV-1.3/200 1.3  32.8 
PV-0.7/220 0.7  48.6  220 3500*2200*2340 4000 DN125
PV-0.8/220 0.8  47.0 
PV-1.0/220 1.0  41.9 
PV-1.3/220 1.3  38.0 
PV-0.7/250 0.7  55.0  250 3500*2200*2340 4500 DN125
PV-0.8/250 0.8  54.0 
PV-1.0/250 1.0  46.0 
PV-1.3/250 1.3  40.0 

How to Choose the Right Air Compressor

An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
air-compressor

Electric motor

While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with two digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
air-compressor

Oil bath

Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.

Start/stop control

An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
air-compressor

Variable speed drive

A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between forty percent and eighty percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.

China Permanent Magnet Screw Compressor New Design Energy Saving 22kw 30HP Screw Compressor Vertical Pm VSD Air Compressor     manufacturer China Permanent Magnet Screw Compressor New Design Energy Saving 22kw 30HP Screw Compressor Vertical Pm VSD Air Compressor     manufacturer
editor by czh 2022-12-29