Category Archives: Ethylene compressor

China Hot selling Zw-0.4/10-16 Oil-Free LPG Compressor Propylene Methane Ethylene Piston Compressor supplier

China Hot Selling Zw-0.4/10-16 Oil-Free LPG Compressor Propylene Methane Ethylene Piston Compressor Supplier

Product Description

Piston Compressor is a type of compressor that uses piston reciprocating motion to pressurize and deliver gas. It consists of a working chamber, transmission parts, body, and auxiliary parts. The working chamber directly compresses the gas, while the piston, driven by the piston rod, moves back and forth in the cylinder. This reciprocating motion causes the volume of the working chamber on both sides of the piston to change, leading to a decrease in volume on one side and an increase in volume on the other. The compressed gas is discharged through a valve on the side with decreased volume, while the gas is absorbed through another valve on the side with increased volume.

The ZW series of oil-free compressors is one of the first products manufactured by our factory in China. These compressors have the advantage of low rotating speed, high component strength, stable operation, long service life, and convenient maintenance. They consist of a compressor, gas-liquid separator, filter, two-position four-way valve, safety valve, check valve, explosion-proof motor, and base. These compressors are small in size, lightweight, low-noise, well-sealed, easy to install, and operate.

The Propane-Butane Mix Compressor is used for unloading, loading, dumping, residual gas recovery, and residual liquid recovery of LPG/C4, propylene, and liquid ammonia. It is widely used in the gas, chemical, energy, and other industries. The compressor plays a crucial role in these industries.

Features:

– Low rotating speed for stable operation
– High component strength for durability
– Convenient maintenance for easy servicing
– Small size and lightweight for easy installation
– Low noise for a comfortable working environment
– Good sealing for enhanced efficiency
– Air cooling for effective cooling

Specifications:

Inlet Pressure: ≤1.6MPa
Outlet Pressure: ≤2.4MPa
Max Differential Pressure: 0.8MPa
Maximum Instantaneous Pressure Ratio: ≤4
Cooling Method: Air Cooling

The unloading volume is calculated based on the provided operating conditions. Please note that the unloading volume may vary depending on the working conditions. It is essential to consider these factors when selecting the appropriate compressor for your specific needs.

The Working Principle of the Four-Way Valve:
The four-way valve has two positions. When the valve is in position A, the gas flows from side A to side B. When the valve is in position B, the gas flows from side C to side B.

Reference Example for Selection and Calculation of Propane-Butane Mix Unloading Compressor

Selection of Compressor Inlet and Outlet Pressure:
The saturated vapor pressure of the Propane-Butane Mix varies with temperature. To meet the operational requirements in high-temperature environments, a 16barg (inlet pressure) – 24barg (outlet pressure) model is recommended.

Compressor Flow Calculation:
The specific flow calculation can be complex, and it is crucial to use appropriate formulas and experience to determine the final values. Here, we provide a simplified calculation method for reference.

Introduction

Disclaimer: The content of this page is sourced from the internet and is meant solely as a reference for product selection. Our products are replacement parts and not original spare parts. We are not the holder of the original trademarks mentioned in this content. Our replacement parts are designed to be compatible with original spare parts, but if you require original spare parts, please contact the respective manufacturers for purchasing.

Performance Characteristics of Ethylene Compressor

1. High Efficiency

Ethylene compressors are known for their high efficiency, ensuring optimal performance in various applications. The compressor’s design and engineering enable it to handle ethylene gas compression with maximum efficiency, resulting in improved productivity and cost-effectiveness.

2. Reliable Operation

Ethylene compressors are built to ensure reliable operation even in demanding conditions. Their robust construction, advanced control systems, and state-of-the-art technologies contribute to their ability to withstand high pressures, temperature variations, and operational challenges.

3. Enhanced Safety

Safety is a paramount consideration when it comes to ethylene compression. Ethylene compressors are designed with multiple safety features, such as pressure relief valves, temperature sensors, and advanced monitoring systems, to prevent accidents and ensure the well-being of operators and surrounding environments.

4. Versatile Applications

Ethylene compressors find wide-ranging applications in various industries. From ethylene production and polymerization processes to ethylene storage and transportation, chemical synthesis, and polyethylene production, these compressors play a crucial role in ensuring smooth operations and maintaining product quality.

Types and Characteristics of Ethylene Compressor

1. Reciprocating Compressors

Reciprocating compressors are commonly used in ethylene compression due to their ability to handle high-pressure gas. These compressors offer excellent efficiency, reliability, and control over the compression process, making them suitable for a wide range of applications.

2. Screw Compressors

Screw compressors are known for their continuous compression process, making them ideal for ethylene compression. These compressors offer high volume flow rates, low vibrations, and compact designs, making them well-suited for both industrial and commercial applications.

3. Centrifugal Compressors

Centrifugal compressors are suitable for large-scale ethylene compression, offering high flow rates and low maintenance requirements. These compressors are highly efficient and often used in industrial settings where there is a need for substantial gas compression.

Advantages of Ethylene Compressor Made of Different Materials

1. Stainless Steel Compressors

  • Excellent corrosion resistance, ensuring long-term durability.
  • High strength and reliability for demanding applications.
  • Suitable for handling high temperatures and harsh operating conditions.

2. Carbon Steel Compressors

  • Cost-effective option without compromising performance.
  • Durable and resistant to wear and tear.
  • Widely available and easy to maintain.

3. Aluminum Compressors

  • Lightweight construction for easy installation and transportation.
  • Good heat dissipation properties, preventing overheating.
  • Corrosion-resistant, suitable for certain applications.

Application of Ethylene Compressor

Ethylene compressors play a vital role in various industries:

Ethylene Production

Ethylene compressors are crucial for the production of ethylene, ensuring efficient compression during the manufacturing process. They contribute to the overall productivity and quality of the ethylene production.

Polymerization

In polymerization processes, ethylene compressors are used to compress and transport ethylene gas for the production of various polymers. The compressors ensure the required pressure and flow rates, enabling the polymerization process to occur efficiently.

Ethylene Storage and Transportation

Ethylene compressors are employed during the storage and transportation of ethylene gas. They help maintain the desired pressure levels and prevent any leakage, ensuring the safe and efficient transfer of ethylene from one location to another.

Chemical Synthesis

In chemical synthesis applications, ethylene compressors are used to compress and transport ethylene gas for various chemical reactions. They provide the necessary pressure and flow rates required for precise and controlled chemical synthesis.

Polyethylene Production

Ethylene compressors are integral to the production of polyethylene, a widely used plastic. They ensure the efficient compression and transportation of ethylene gas, contributing to the overall quality and productivity of polyethylene manufacturing.

Future Development Trends and Opportunities

The future of ethylene compressor products is promising, with several development trends and opportunities:

1. Advanced Technologies

The integration of advanced technologies, such as IoT (Internet of Things) and automation, will enhance the efficiency, control, and monitoring capabilities of ethylene compressors, leading to improved performance and reduced maintenance requirements.

2. Energy Efficiency

The development of energy-efficient ethylene compressors will be a key focus, as industries strive to reduce energy consumption and minimize their environmental impact. Innovations in compressor design and materials will contribute to achieving higher energy efficiency.

3. Enhanced Safety Features

Continued advancements in safety features will ensure the highest level of operator and environmental safety. Ethylene compressors will incorporate advanced monitoring systems, real-time data analysis, and predictive maintenance capabilities to prevent accidents and improve overall safety.

4. Industry-Specific Customization

The future will witness a growing demand for ethylene compressors tailored to specific industry requirements. Customization options, including pressure range, volume flow rates, materials, and control systems, will enable efficient and optimized ethylene compression in various sectors.

Choosing a Suitable Ethylene Compressor

When choosing an ethylene compressor, consider the following aspects:

1. Clear Requirements

Identify your specific ethylene compression requirements, including pressure range, volume flow rates, temperature range, and any industry-specific needs. This will help narrow down the options and ensure the chosen compressor meets your exact demands.

2. Material Selection

Based on the operating conditions, consider the material of the compressor that best suits your requirements. Stainless steel, carbon steel, or aluminum options may be suitable, depending on factors such as corrosion resistance, strength, and weight considerations.

3. Design Optimization

Look for compressors with optimized designs that offer high efficiency, low vibration, and noise levels. Features such as advanced cooling systems, compact designs, and ease of maintenance should also be considered to ensure long-term performance and ease of operation.

4. Suppliers and After-Sales Service

Choose reputable suppliers who provide reliable ethylene compressors and offer comprehensive after-sales service. This ensures access to technical support, spare parts, and maintenance assistance, guaranteeing the smooth operation of your ethylene compression system.

5. Cost-Effectiveness

Consider the overall cost-effectiveness of the ethylene compressor, taking into account not only the initial purchase price but also energy consumption, maintenance requirements, and long-term reliability. A balance between upfront investment and long-term operational costs should be achieved.

6. Quality Control

Ensure that the chosen ethylene compressor meets industry standards and undergoes rigorous quality control processes. Look for certifications and accreditations that reflect the manufacturer’s commitment to delivering high-quality and reliable products.

Author: Dream

China Custom Powerful Electrical Motor Driven Gas Booster Compressor for Hydrogen Gas /Natural Gas /Ethylene /Acetylene/Co air compressor repair near me

China Custom Powerful Electrical Motor Driven Gas Booster Compressor for Hydrogen Gas /Natural Gas /Ethylene /Acetylene/Co air compressor repair near me

Product Description

Reciprocating Oil-free Piston Compressor

Our company specializes in manufacturing a wide range of compressors, including diaphragm compressors, piston compressors, air compressors, nitrogen generators, oxygen generators, gas cylinders, and more. We offer customized products that can be tailored to your specific parameters and requirements.

This series of oil-free compressors is one of our flagship products manufactured in China. It offers several key features such as low speed, high component strength, stable operation, long service life, and easy maintenance. The compressor is designed as a compact unit, integrating a compressor, gas-liquid separator, filter, 2 position four-way valve, safety valve, check valve, explosion-proof motor, and chassis. It boasts a small volume, light weight, low noise, good sealing performance, easy installation, and simple operation.

Main Components

1. Motion system: crankshaft, piston connecting rod assembly, coupling, etc.
2. Air distribution system: valve plate, valve spring, etc.
3. Sealing system: piston ring, oil seal, gasket, packing, etc.
4. Body system: crankcase, cylinder block, cylinder liner, cover plate, etc.
5. Lubrication system: lubricating oil pump, oil filter, pressure regulating valve, etc.
6. Safety and energy regulation systems: safety valves, energy regulation devices, etc.

Working Principle of Piston Compressor

When the crankshaft of the piston compressor rotates, the piston reciprocates through the transmission of the connecting rod, causing the working volume formed by the inner wall of the cylinder, the cylinder head, and the top surface of the piston to periodically change. During the intake stroke, the piston

Introduction

Disclaimer: The content of this page is sourced from the internet and is meant solely as a reference for product selection. Our products are replacement parts and not original spare parts. We are not the holder of the original trademarks mentioned in this content. Our replacement parts are designed to be compatible with original spare parts, but if you require original spare parts, please contact the respective manufacturers for purchasing.

Performance Characteristics of Ethylene Compressor

1. High Efficiency

Ethylene compressors are known for their high efficiency, ensuring optimal performance in various applications. The compressor’s design and engineering enable it to handle ethylene gas compression with maximum efficiency, resulting in improved productivity and cost-effectiveness.

2. Reliable Operation

Ethylene compressors are built to ensure reliable operation even in demanding conditions. Their robust construction, advanced control systems, and state-of-the-art technologies contribute to their ability to withstand high pressures, temperature variations, and operational challenges.

3. Enhanced Safety

Safety is a paramount consideration when it comes to ethylene compression. Ethylene compressors are designed with multiple safety features, such as pressure relief valves, temperature sensors, and advanced monitoring systems, to prevent accidents and ensure the well-being of operators and surrounding environments.

4. Versatile Applications

Ethylene compressors find wide-ranging applications in various industries. From ethylene production and polymerization processes to ethylene storage and transportation, chemical synthesis, and polyethylene production, these compressors play a crucial role in ensuring smooth operations and maintaining product quality.

Types and Characteristics of Ethylene Compressor

1. Reciprocating Compressors

Reciprocating compressors are commonly used in ethylene compression due to their ability to handle high-pressure gas. These compressors offer excellent efficiency, reliability, and control over the compression process, making them suitable for a wide range of applications.

2. Screw Compressors

Screw compressors are known for their continuous compression process, making them ideal for ethylene compression. These compressors offer high volume flow rates, low vibrations, and compact designs, making them well-suited for both industrial and commercial applications.

3. Centrifugal Compressors

Centrifugal compressors are suitable for large-scale ethylene compression, offering high flow rates and low maintenance requirements. These compressors are highly efficient and often used in industrial settings where there is a need for substantial gas compression.

Advantages of Ethylene Compressor Made of Different Materials

1. Stainless Steel Compressors

  • Excellent corrosion resistance, ensuring long-term durability.
  • High strength and reliability for demanding applications.
  • Suitable for handling high temperatures and harsh operating conditions.

2. Carbon Steel Compressors

  • Cost-effective option without compromising performance.
  • Durable and resistant to wear and tear.
  • Widely available and easy to maintain.

3. Aluminum Compressors

  • Lightweight construction for easy installation and transportation.
  • Good heat dissipation properties, preventing overheating.
  • Corrosion-resistant, suitable for certain applications.

Application of Ethylene Compressor

Ethylene compressors play a vital role in various industries:

Ethylene Production

Ethylene compressors are crucial for the production of ethylene, ensuring efficient compression during the manufacturing process. They contribute to the overall productivity and quality of the ethylene production.

Polymerization

In polymerization processes, ethylene compressors are used to compress and transport ethylene gas for the production of various polymers. The compressors ensure the required pressure and flow rates, enabling the polymerization process to occur efficiently.

Ethylene Storage and Transportation

Ethylene compressors are employed during the storage and transportation of ethylene gas. They help maintain the desired pressure levels and prevent any leakage, ensuring the safe and efficient transfer of ethylene from one location to another.

Chemical Synthesis

In chemical synthesis applications, ethylene compressors are used to compress and transport ethylene gas for various chemical reactions. They provide the necessary pressure and flow rates required for precise and controlled chemical synthesis.

Polyethylene Production

Ethylene compressors are integral to the production of polyethylene, a widely used plastic. They ensure the efficient compression and transportation of ethylene gas, contributing to the overall quality and productivity of polyethylene manufacturing.

Future Development Trends and Opportunities

The future of ethylene compressor products is promising, with several development trends and opportunities:

1. Advanced Technologies

The integration of advanced technologies, such as IoT (Internet of Things) and automation, will enhance the efficiency, control, and monitoring capabilities of ethylene compressors, leading to improved performance and reduced maintenance requirements.

2. Energy Efficiency

The development of energy-efficient ethylene compressors will be a key focus, as industries strive to reduce energy consumption and minimize their environmental impact. Innovations in compressor design and materials will contribute to achieving higher energy efficiency.

3. Enhanced Safety Features

Continued advancements in safety features will ensure the highest level of operator and environmental safety. Ethylene compressors will incorporate advanced monitoring systems, real-time data analysis, and predictive maintenance capabilities to prevent accidents and improve overall safety.

4. Industry-Specific Customization

The future will witness a growing demand for ethylene compressors tailored to specific industry requirements. Customization options, including pressure range, volume flow rates, materials, and control systems, will enable efficient and optimized ethylene compression in various sectors.

Choosing a Suitable Ethylene Compressor

When choosing an ethylene compressor, consider the following aspects:

1. Clear Requirements

Identify your specific ethylene compression requirements, including pressure range, volume flow rates, temperature range, and any industry-specific needs. This will help narrow down the options and ensure the chosen compressor meets your exact demands.

2. Material Selection

Based on the operating conditions, consider the material of the compressor that best suits your requirements. Stainless steel, carbon steel, or aluminum options may be suitable, depending on factors such as corrosion resistance, strength, and weight considerations.

3. Design Optimization

Look for compressors with optimized designs that offer high efficiency, low vibration, and noise levels. Features such as advanced cooling systems, compact designs, and ease of maintenance should also be considered to ensure long-term performance and ease of operation.

4. Suppliers and After-Sales Service

Choose reputable suppliers who provide reliable ethylene compressors and offer comprehensive after-sales service. This ensures access to technical support, spare parts, and maintenance assistance, guaranteeing the smooth operation of your ethylene compression system.

5. Cost-Effectiveness

Consider the overall cost-effectiveness of the ethylene compressor, taking into account not only the initial purchase price but also energy consumption, maintenance requirements, and long-term reliability. A balance between upfront investment and long-term operational costs should be achieved.

6. Quality Control

Ensure that the chosen ethylene compressor meets industry standards and undergoes rigorous quality control processes. Look for certifications and accreditations that reflect the manufacturer’s commitment to delivering high-quality and reliable products.

Author: Dream

China Good quality Ethylene + Mineral Spirits Piston Displacement Reciprocating Diaphragm Membrane Gas Booster Compressor air compressor price

China Good quality Ethylene + Mineral Spirits Piston Displacement Reciprocating Diaphragm Membrane Gas Booster Compressor air compressor price

Product Description

Our piston compressors and diaphragm compressors are designed and manufactured with over 30 years of industry experience and expertise. These compressors are widely used in various industries such as hydrogen energy, semiconductors, chemicals, petrochemicals, and natural gas transportation. We are committed to providing high-quality compressed gas solutions for the hydrogen energy industry.

Piston Compressors

Piston compressors are a type of positive displacement compressor commonly used in the chemical industry. They work by using a piston and cylinder to compress gas or air, creating pressure for transportation through pipelines or other processes. They are reliable, efficient, and can handle specific types of gases and air with ease. Some common applications of piston compressors in the chemical industry include:

  • Gas compression – Compressing natural gas, hydrogen, and other gases used in chemical processes.
  • Pneumatic conveying – Transporting materials in a powdered or granular form through pipelines.
  • Refrigeration – Compressing refrigerant gases for cooling industrial processes and equipment.
  • Process air compression – Compressing air for use in pneumatic equipment and air-powered tools.

When choosing a piston compressor for chemical industry applications, factors such as the type of gas or air being compressed, required flow rate and pressure, environmental conditions, and maintenance requirements should be considered.

Diaphragm Compressors

Diaphragm compressors are highly efficient, energy-saving, environmentally friendly, and reliable compressors. They have achieved great success and are widely used in various fields. These compressors are suitable for applications in hydrogen energy, silicon, fluorine chemical industry, petrochemical industry, metallurgy, medicine, aerospace, and nuclear power.

Detailed Photos

[Insert detailed photos of the piston and diaphragm compressors here]

After Sales Service

In addition to our high-quality products, we provide comprehensive after-sales services to ensure the safe and stable operation of customer equipment. Our independent service operation and maintenance team offers technical support, debugging services, spare parts supply, renovation and upgrading, and major maintenance. We are committed to providing reliable support for our customers’ operations 24/7.

Other Products from EVER-POWER GROUP

EVER-POWER GROUP specializes in supplying various industrial products, including agricultural gearboxes, power output shafts, sprockets, fluid couplings, worm gear reducers, gears and racks, roller chains, pulleys and pulleys, planetary gearboxes, timing pulleys, and bushings. We are dedicated to providing high-quality products, competitive prices, and considerate services. Customers are welcome to customize drawings and samples to meet their specific requirements.

Frequently Asked Questions (FAQs)

  1. What are the applications of piston compressors in the chemical industry?
  2. Why are piston compressors popular in the chemical industry?
  3. What factors should be considered when choosing a piston compressor for chemical industry applications?
  4. What are the advantages of diaphragm compressors?
  5. What industries can benefit from diaphragm compressors?

Introduction

Disclaimer: The content of this page is sourced from the internet and is meant solely as a reference for product selection. Our products are replacement parts and not original spare parts. We are not the holder of the original trademarks mentioned in this content. Our replacement parts are designed to be compatible with original spare parts, but if you require original spare parts, please contact the respective manufacturers for purchasing.

Performance Characteristics of Ethylene Compressor

1. High Efficiency

Ethylene compressors are known for their high efficiency, ensuring optimal performance in various applications. The compressor’s design and engineering enable it to handle ethylene gas compression with maximum efficiency, resulting in improved productivity and cost-effectiveness.

2. Reliable Operation

Ethylene compressors are built to ensure reliable operation even in demanding conditions. Their robust construction, advanced control systems, and state-of-the-art technologies contribute to their ability to withstand high pressures, temperature variations, and operational challenges.

3. Enhanced Safety

Safety is a paramount consideration when it comes to ethylene compression. Ethylene compressors are designed with multiple safety features, such as pressure relief valves, temperature sensors, and advanced monitoring systems, to prevent accidents and ensure the well-being of operators and surrounding environments.

4. Versatile Applications

Ethylene compressors find wide-ranging applications in various industries. From ethylene production and polymerization processes to ethylene storage and transportation, chemical synthesis, and polyethylene production, these compressors play a crucial role in ensuring smooth operations and maintaining product quality.

Types and Characteristics of Ethylene Compressor

1. Reciprocating Compressors

Reciprocating compressors are commonly used in ethylene compression due to their ability to handle high-pressure gas. These compressors offer excellent efficiency, reliability, and control over the compression process, making them suitable for a wide range of applications.

2. Screw Compressors

Screw compressors are known for their continuous compression process, making them ideal for ethylene compression. These compressors offer high volume flow rates, low vibrations, and compact designs, making them well-suited for both industrial and commercial applications.

3. Centrifugal Compressors

Centrifugal compressors are suitable for large-scale ethylene compression, offering high flow rates and low maintenance requirements. These compressors are highly efficient and often used in industrial settings where there is a need for substantial gas compression.

Advantages of Ethylene Compressor Made of Different Materials

1. Stainless Steel Compressors

  • Excellent corrosion resistance, ensuring long-term durability.
  • High strength and reliability for demanding applications.
  • Suitable for handling high temperatures and harsh operating conditions.

2. Carbon Steel Compressors

  • Cost-effective option without compromising performance.
  • Durable and resistant to wear and tear.
  • Widely available and easy to maintain.

3. Aluminum Compressors

  • Lightweight construction for easy installation and transportation.
  • Good heat dissipation properties, preventing overheating.
  • Corrosion-resistant, suitable for certain applications.

Application of Ethylene Compressor

Ethylene compressors play a vital role in various industries:

Ethylene Production

Ethylene compressors are crucial for the production of ethylene, ensuring efficient compression during the manufacturing process. They contribute to the overall productivity and quality of the ethylene production.

Polymerization

In polymerization processes, ethylene compressors are used to compress and transport ethylene gas for the production of various polymers. The compressors ensure the required pressure and flow rates, enabling the polymerization process to occur efficiently.

Ethylene Storage and Transportation

Ethylene compressors are employed during the storage and transportation of ethylene gas. They help maintain the desired pressure levels and prevent any leakage, ensuring the safe and efficient transfer of ethylene from one location to another.

Chemical Synthesis

In chemical synthesis applications, ethylene compressors are used to compress and transport ethylene gas for various chemical reactions. They provide the necessary pressure and flow rates required for precise and controlled chemical synthesis.

Polyethylene Production

Ethylene compressors are integral to the production of polyethylene, a widely used plastic. They ensure the efficient compression and transportation of ethylene gas, contributing to the overall quality and productivity of polyethylene manufacturing.

Future Development Trends and Opportunities

The future of ethylene compressor products is promising, with several development trends and opportunities:

1. Advanced Technologies

The integration of advanced technologies, such as IoT (Internet of Things) and automation, will enhance the efficiency, control, and monitoring capabilities of ethylene compressors, leading to improved performance and reduced maintenance requirements.

2. Energy Efficiency

The development of energy-efficient ethylene compressors will be a key focus, as industries strive to reduce energy consumption and minimize their environmental impact. Innovations in compressor design and materials will contribute to achieving higher energy efficiency.

3. Enhanced Safety Features

Continued advancements in safety features will ensure the highest level of operator and environmental safety. Ethylene compressors will incorporate advanced monitoring systems, real-time data analysis, and predictive maintenance capabilities to prevent accidents and improve overall safety.

4. Industry-Specific Customization

The future will witness a growing demand for ethylene compressors tailored to specific industry requirements. Customization options, including pressure range, volume flow rates, materials, and control systems, will enable efficient and optimized ethylene compression in various sectors.

Choosing a Suitable Ethylene Compressor

When choosing an ethylene compressor, consider the following aspects:

1. Clear Requirements

Identify your specific ethylene compression requirements, including pressure range, volume flow rates, temperature range, and any industry-specific needs. This will help narrow down the options and ensure the chosen compressor meets your exact demands.

2. Material Selection

Based on the operating conditions, consider the material of the compressor that best suits your requirements. Stainless steel, carbon steel, or aluminum options may be suitable, depending on factors such as corrosion resistance, strength, and weight considerations.

3. Design Optimization

Look for compressors with optimized designs that offer high efficiency, low vibration, and noise levels. Features such as advanced cooling systems, compact designs, and ease of maintenance should also be considered to ensure long-term performance and ease of operation.

4. Suppliers and After-Sales Service

Choose reputable suppliers who provide reliable ethylene compressors and offer comprehensive after-sales service. This ensures access to technical support, spare parts, and maintenance assistance, guaranteeing the smooth operation of your ethylene compression system.

5. Cost-Effectiveness

Consider the overall cost-effectiveness of the ethylene compressor, taking into account not only the initial purchase price but also energy consumption, maintenance requirements, and long-term reliability. A balance between upfront investment and long-term operational costs should be achieved.

6. Quality Control

Ensure that the chosen ethylene compressor meets industry standards and undergoes rigorous quality control processes. Look for certifications and accreditations that reflect the manufacturer’s commitment to delivering high-quality and reliable products.

Author: Dream

China Good quality VW-11.3/26 Gas Compressor Ethylene Bog Compressor Solve Gas Compression Problems in Petroleum, Chemical, Gas, and Pharmaceutical Industries Factories with Hot selling

China Good quality VW-11.3/26 Gas Compressor Ethylene Bog Compressor

The China Good quality VW-11.3/26 Gas Compressor Ethylene Bog Compressor is a highly efficient and reliable compressor designed to solve gas compression problems in the petroleum, chemical, gas, and pharmaceutical industries. With its hot selling status, this compressor has gained popularity in factories worldwide.

Product Description

The VW-11.3/26 Gas Compressor Ethylene Bog Compressor, manufactured by HangZhou United Compressor Manufacturing Co., Ltd., is a top-of-the-line compressor unit produced using advanced technology from Mannes Mandermarg Company in Germany. With its low noise, low vibration, and compact structure, this compressor operates smoothly and reliably.

Equipped with alarm and shutdown functions for various conditions such as low oil pressure, low water pressure, high temperature, low inlet pressure, and high exhaust pressure, the VW-11.3/26 Gas Compressor ensures safe and reliable operation.

Key Features:

  1. Advanced piston compressor unit technology from Germany
  2. Low noise, low vibration, and compact structure
  3. Smooth operation, safety, and reliability
  4. High automation level
  5. Data-driven remote display and control system available

Structure:

The VW-11.3/26 Gas Compressor consists of a compressor host, electric motor, coupling, flywheel, pipeline system, cooling system, electrical equipment, and auxiliary equipment. This comprehensive design ensures optimal performance and efficiency in various industrial applications.

Product Application

The VW-11.3/26 Gas Compressor is primarily used for pressurized transmission of natural gas into the pipeline network. It is also suitable for stirring in the pharmaceutical and brewing industries, pressurized gas transportation in the chemical industry, blow molding bottle making in the food industry, and dust removal of parts in the machine manufacturing industry.

Reference Technical Parameters and Specifications:

Introduction

Disclaimer: The content of this page is sourced from the internet and is meant solely as a reference for product selection. Our products are replacement parts and not original spare parts. We are not the holder of the original trademarks mentioned in this content. Our replacement parts are designed to be compatible with original spare parts, but if you require original spare parts, please contact the respective manufacturers for purchasing.

Performance Characteristics of Ethylene Compressor

1. High Efficiency

Ethylene compressors are known for their high efficiency, ensuring optimal performance in various applications. The compressor’s design and engineering enable it to handle ethylene gas compression with maximum efficiency, resulting in improved productivity and cost-effectiveness.

2. Reliable Operation

Ethylene compressors are built to ensure reliable operation even in demanding conditions. Their robust construction, advanced control systems, and state-of-the-art technologies contribute to their ability to withstand high pressures, temperature variations, and operational challenges.

3. Enhanced Safety

Safety is a paramount consideration when it comes to ethylene compression. Ethylene compressors are designed with multiple safety features, such as pressure relief valves, temperature sensors, and advanced monitoring systems, to prevent accidents and ensure the well-being of operators and surrounding environments.

4. Versatile Applications

Ethylene compressors find wide-ranging applications in various industries. From ethylene production and polymerization processes to ethylene storage and transportation, chemical synthesis, and polyethylene production, these compressors play a crucial role in ensuring smooth operations and maintaining product quality.

Types and Characteristics of Ethylene Compressor

1. Reciprocating Compressors

Reciprocating compressors are commonly used in ethylene compression due to their ability to handle high-pressure gas. These compressors offer excellent efficiency, reliability, and control over the compression process, making them suitable for a wide range of applications.

2. Screw Compressors

Screw compressors are known for their continuous compression process, making them ideal for ethylene compression. These compressors offer high volume flow rates, low vibrations, and compact designs, making them well-suited for both industrial and commercial applications.

3. Centrifugal Compressors

Centrifugal compressors are suitable for large-scale ethylene compression, offering high flow rates and low maintenance requirements. These compressors are highly efficient and often used in industrial settings where there is a need for substantial gas compression.

Advantages of Ethylene Compressor Made of Different Materials

1. Stainless Steel Compressors

  • Excellent corrosion resistance, ensuring long-term durability.
  • High strength and reliability for demanding applications.
  • Suitable for handling high temperatures and harsh operating conditions.

2. Carbon Steel Compressors

  • Cost-effective option without compromising performance.
  • Durable and resistant to wear and tear.
  • Widely available and easy to maintain.

3. Aluminum Compressors

  • Lightweight construction for easy installation and transportation.
  • Good heat dissipation properties, preventing overheating.
  • Corrosion-resistant, suitable for certain applications.

Application of Ethylene Compressor

Ethylene compressors play a vital role in various industries:

Ethylene Production

Ethylene compressors are crucial for the production of ethylene, ensuring efficient compression during the manufacturing process. They contribute to the overall productivity and quality of the ethylene production.

Polymerization

In polymerization processes, ethylene compressors are used to compress and transport ethylene gas for the production of various polymers. The compressors ensure the required pressure and flow rates, enabling the polymerization process to occur efficiently.

Ethylene Storage and Transportation

Ethylene compressors are employed during the storage and transportation of ethylene gas. They help maintain the desired pressure levels and prevent any leakage, ensuring the safe and efficient transfer of ethylene from one location to another.

Chemical Synthesis

In chemical synthesis applications, ethylene compressors are used to compress and transport ethylene gas for various chemical reactions. They provide the necessary pressure and flow rates required for precise and controlled chemical synthesis.

Polyethylene Production

Ethylene compressors are integral to the production of polyethylene, a widely used plastic. They ensure the efficient compression and transportation of ethylene gas, contributing to the overall quality and productivity of polyethylene manufacturing.

Future Development Trends and Opportunities

The future of ethylene compressor products is promising, with several development trends and opportunities:

1. Advanced Technologies

The integration of advanced technologies, such as IoT (Internet of Things) and automation, will enhance the efficiency, control, and monitoring capabilities of ethylene compressors, leading to improved performance and reduced maintenance requirements.

2. Energy Efficiency

The development of energy-efficient ethylene compressors will be a key focus, as industries strive to reduce energy consumption and minimize their environmental impact. Innovations in compressor design and materials will contribute to achieving higher energy efficiency.

3. Enhanced Safety Features

Continued advancements in safety features will ensure the highest level of operator and environmental safety. Ethylene compressors will incorporate advanced monitoring systems, real-time data analysis, and predictive maintenance capabilities to prevent accidents and improve overall safety.

4. Industry-Specific Customization

The future will witness a growing demand for ethylene compressors tailored to specific industry requirements. Customization options, including pressure range, volume flow rates, materials, and control systems, will enable efficient and optimized ethylene compression in various sectors.

Choosing a Suitable Ethylene Compressor

When choosing an ethylene compressor, consider the following aspects:

1. Clear Requirements

Identify your specific ethylene compression requirements, including pressure range, volume flow rates, temperature range, and any industry-specific needs. This will help narrow down the options and ensure the chosen compressor meets your exact demands.

2. Material Selection

Based on the operating conditions, consider the material of the compressor that best suits your requirements. Stainless steel, carbon steel, or aluminum options may be suitable, depending on factors such as corrosion resistance, strength, and weight considerations.

3. Design Optimization

Look for compressors with optimized designs that offer high efficiency, low vibration, and noise levels. Features such as advanced cooling systems, compact designs, and ease of maintenance should also be considered to ensure long-term performance and ease of operation.

4. Suppliers and After-Sales Service

Choose reputable suppliers who provide reliable ethylene compressors and offer comprehensive after-sales service. This ensures access to technical support, spare parts, and maintenance assistance, guaranteeing the smooth operation of your ethylene compression system.

5. Cost-Effectiveness

Consider the overall cost-effectiveness of the ethylene compressor, taking into account not only the initial purchase price but also energy consumption, maintenance requirements, and long-term reliability. A balance between upfront investment and long-term operational costs should be achieved.

6. Quality Control

Ensure that the chosen ethylene compressor meets industry standards and undergoes rigorous quality control processes. Look for certifications and accreditations that reflect the manufacturer’s commitment to delivering high-quality and reliable products.

Author: Dream

China factory Corrosion-Proof 110nm3 Ethylene Diaphragm Compressor 25bar Petrochemical Gas Booster air compressor portable

China Factory Corrosion-Proof 110nm3 Ethylene Diaphragm Compressor 25bar Petrochemical Gas Booster Air Compressor Portable

Product Description

The Completely Oil-Free Reciprocating Diaphragm Compressor is specifically designed for applications in the petrochemical industry. With its corrosion-proof construction, this compressor offers reliable and efficient performance in handling ethylene gas at high pressures.

Our company specializes in manufacturing a wide range of compressors, including diaphragm compressors, piston compressors, air compressors, nitrogen generators, oxygen generators, gas cylinders, and more. We provide customized solutions tailored to your specific parameters and requirements.

Process Principle

The diaphragm compressor is carefully selected to meet the user’s specific needs. Its metal diaphragm completely separates the gas from the hydraulic oil system, ensuring the purity of the gas without any contamination. Advanced manufacturing technology and precise membrane cavity design ensure the diaphragm’s longevity and prevent pollution. The compressor’s structure consists of a motor, base, crankcase, crankshaft linkage mechanism, cylinder components, crankshaft connecting rod, piston, oil and gas pipelines, electric control system, and various accessories.

Advantages of Diaphragm Compressors

  • No Leakage: The compressor’s membrane head is sealed by a static “O” ring, providing a long-lasting and leak-free compression process.
  • Corrosion Resistance: The compressor’s membrane head is made of 316L stainless steel, and the diaphragm is made of 301 stainless steel, ensuring excellent corrosion resistance.
  • Reduced Maintenance Time: The “O” ring seal reduces the tightening torque of flange bolts, minimizing shutdown maintenance time.

Reference Specification

NO. MODEL Compressed medium Flow rate
(Nm³/h)
Inlet pressure
(MPa)
Outlet pressure
(MPa)
Rotating speed
(r/min)
Motor power
(KW)
Cooling mode Overall dimension
(mm)
Weight
(Kg)
Model Cooling Water Consumption (t/h) Displacement (Nm³/h) Intake Pressure (MPa) Exhaust Pressure (MPa) Dimensions L×W×H (mm) Weight (t) Motor Power (kW)
GL-10/160 1 10 atmo 16 2200×1200×1300 1.6 7.5
GL-25/15 1 25 tomo 1.5 2200×1200×1300 1.6 7.5
GL-20/12-160 1 20 1.2 16 2200×1200×1300 1.6 7.5
GL-70/5-35 1.5 70 0.5 3.5 2000×1000×1200 1.6 15
GL-20/10-150 1.5 20 1.0 15 2200×1200×1300 1.6 15

Other Product Businesses

Ever-Power Group is a leading supplier of various industrial products, including agricultural gearboxes, power output shafts, sprockets, fluid couplings, worm gear reducers, gears and racks, roller chains, pulleys, planetary gearboxes, timing pulleys, bushings, and more. We offer high-quality products, competitive prices, and exceptional customer service. We welcome customization requests based on your drawings and samples.

Frequently Asked Questions (FAQs)

1. What makes the diaphragm compressor oil-free?

The diaphragm of the compressor completely separates the gas from the hydraulic oil system, ensuring oil-free compression and maintaining the purity of the gas.

2. How does the corrosion-proof construction enhance the compressor’s performance?

The compressor’s membrane head and diaphragm are made of corrosion-resistant stainless steel, ensuring durability and reliability in handling corrosive gases.

3. Can the diaphragm compressor be customized according to specific requirements?

Yes, our company offers customization services to meet your specific parameters and requirements.

4. What are the advantages of using a diaphragm compressor?

The advantages include no leakage during compression, excellent corrosion resistance, and reduced maintenance time due to the “O” ring seal design.

5. Does Ever-Power Group provide products for industries other than compressors?

Yes, in addition to compressors, Ever-Power Group offers a wide range of industrial products, including agricultural gearboxes, power output shafts, sprockets, fluid couplings, worm gear reducers, gears and racks, roller chains, pulleys, planetary gearboxes, timing pulleys

Introduction

Disclaimer: The content of this page is sourced from the internet and is meant solely as a reference for product selection. Our products are replacement parts and not original spare parts. We are not the holder of the original trademarks mentioned in this content. Our replacement parts are designed to be compatible with original spare parts, but if you require original spare parts, please contact the respective manufacturers for purchasing.

Performance Characteristics of Ethylene Compressor

1. High Efficiency

Ethylene compressors are known for their high efficiency, ensuring optimal performance in various applications. The compressor’s design and engineering enable it to handle ethylene gas compression with maximum efficiency, resulting in improved productivity and cost-effectiveness.

2. Reliable Operation

Ethylene compressors are built to ensure reliable operation even in demanding conditions. Their robust construction, advanced control systems, and state-of-the-art technologies contribute to their ability to withstand high pressures, temperature variations, and operational challenges.

3. Enhanced Safety

Safety is a paramount consideration when it comes to ethylene compression. Ethylene compressors are designed with multiple safety features, such as pressure relief valves, temperature sensors, and advanced monitoring systems, to prevent accidents and ensure the well-being of operators and surrounding environments.

4. Versatile Applications

Ethylene compressors find wide-ranging applications in various industries. From ethylene production and polymerization processes to ethylene storage and transportation, chemical synthesis, and polyethylene production, these compressors play a crucial role in ensuring smooth operations and maintaining product quality.

Types and Characteristics of Ethylene Compressor

1. Reciprocating Compressors

Reciprocating compressors are commonly used in ethylene compression due to their ability to handle high-pressure gas. These compressors offer excellent efficiency, reliability, and control over the compression process, making them suitable for a wide range of applications.

2. Screw Compressors

Screw compressors are known for their continuous compression process, making them ideal for ethylene compression. These compressors offer high volume flow rates, low vibrations, and compact designs, making them well-suited for both industrial and commercial applications.

3. Centrifugal Compressors

Centrifugal compressors are suitable for large-scale ethylene compression, offering high flow rates and low maintenance requirements. These compressors are highly efficient and often used in industrial settings where there is a need for substantial gas compression.

Advantages of Ethylene Compressor Made of Different Materials

1. Stainless Steel Compressors

  • Excellent corrosion resistance, ensuring long-term durability.
  • High strength and reliability for demanding applications.
  • Suitable for handling high temperatures and harsh operating conditions.

2. Carbon Steel Compressors

  • Cost-effective option without compromising performance.
  • Durable and resistant to wear and tear.
  • Widely available and easy to maintain.

3. Aluminum Compressors

  • Lightweight construction for easy installation and transportation.
  • Good heat dissipation properties, preventing overheating.
  • Corrosion-resistant, suitable for certain applications.

Application of Ethylene Compressor

Ethylene compressors play a vital role in various industries:

Ethylene Production

Ethylene compressors are crucial for the production of ethylene, ensuring efficient compression during the manufacturing process. They contribute to the overall productivity and quality of the ethylene production.

Polymerization

In polymerization processes, ethylene compressors are used to compress and transport ethylene gas for the production of various polymers. The compressors ensure the required pressure and flow rates, enabling the polymerization process to occur efficiently.

Ethylene Storage and Transportation

Ethylene compressors are employed during the storage and transportation of ethylene gas. They help maintain the desired pressure levels and prevent any leakage, ensuring the safe and efficient transfer of ethylene from one location to another.

Chemical Synthesis

In chemical synthesis applications, ethylene compressors are used to compress and transport ethylene gas for various chemical reactions. They provide the necessary pressure and flow rates required for precise and controlled chemical synthesis.

Polyethylene Production

Ethylene compressors are integral to the production of polyethylene, a widely used plastic. They ensure the efficient compression and transportation of ethylene gas, contributing to the overall quality and productivity of polyethylene manufacturing.

Future Development Trends and Opportunities

The future of ethylene compressor products is promising, with several development trends and opportunities:

1. Advanced Technologies

The integration of advanced technologies, such as IoT (Internet of Things) and automation, will enhance the efficiency, control, and monitoring capabilities of ethylene compressors, leading to improved performance and reduced maintenance requirements.

2. Energy Efficiency

The development of energy-efficient ethylene compressors will be a key focus, as industries strive to reduce energy consumption and minimize their environmental impact. Innovations in compressor design and materials will contribute to achieving higher energy efficiency.

3. Enhanced Safety Features

Continued advancements in safety features will ensure the highest level of operator and environmental safety. Ethylene compressors will incorporate advanced monitoring systems, real-time data analysis, and predictive maintenance capabilities to prevent accidents and improve overall safety.

4. Industry-Specific Customization

The future will witness a growing demand for ethylene compressors tailored to specific industry requirements. Customization options, including pressure range, volume flow rates, materials, and control systems, will enable efficient and optimized ethylene compression in various sectors.

Choosing a Suitable Ethylene Compressor

When choosing an ethylene compressor, consider the following aspects:

1. Clear Requirements

Identify your specific ethylene compression requirements, including pressure range, volume flow rates, temperature range, and any industry-specific needs. This will help narrow down the options and ensure the chosen compressor meets your exact demands.

2. Material Selection

Based on the operating conditions, consider the material of the compressor that best suits your requirements. Stainless steel, carbon steel, or aluminum options may be suitable, depending on factors such as corrosion resistance, strength, and weight considerations.

3. Design Optimization

Look for compressors with optimized designs that offer high efficiency, low vibration, and noise levels. Features such as advanced cooling systems, compact designs, and ease of maintenance should also be considered to ensure long-term performance and ease of operation.

4. Suppliers and After-Sales Service

Choose reputable suppliers who provide reliable ethylene compressors and offer comprehensive after-sales service. This ensures access to technical support, spare parts, and maintenance assistance, guaranteeing the smooth operation of your ethylene compression system.

5. Cost-Effectiveness

Consider the overall cost-effectiveness of the ethylene compressor, taking into account not only the initial purchase price but also energy consumption, maintenance requirements, and long-term reliability. A balance between upfront investment and long-term operational costs should be achieved.

6. Quality Control

Ensure that the chosen ethylene compressor meets industry standards and undergoes rigorous quality control processes. Look for certifications and accreditations that reflect the manufacturer’s commitment to delivering high-quality and reliable products.

Author: Dream

China supplier 300nm3/H High Pressure Air-Cooled Ammonia Compressor Propylene Ethylene Diaphragm Compressor Gas Compressor manufacturer

China Supplier of High Pressure Air-Cooled Ammonia Compressor Propylene Ethylene Diaphragm Compressor Gas Compressor

The China Supplier of High Pressure Air-Cooled Ammonia Compressor Propylene Ethylene Diaphragm Compressor Gas Compressor is a high-quality and efficient compressor designed for various gas compression and transportation needs. With its advanced technology and reliable performance, this compressor is the ideal choice for industries requiring compressed gas in their operations.

Product Description

The High Pressure Air-Cooled Ammonia Compressor Propylene Ethylene Diaphragm Compressor Gas Compressor is a reciprocating compressor that effectively compresses and transports gas through the reciprocating motion of the diaphragm within the cylinder. Its unique design features a diaphragm clamped by two restraint plates, creating a cylinder-like structure. This diaphragm is hydraulically driven to move back and forth within the cylinder, facilitating the compression and transportation of gas.

This diaphragm compressor offers numerous advantages, including a large compression ratio and a wide pressure range. It possesses excellent sealing characteristics, ensuring minimal gas leakage during operation. Additionally, the diaphragm compressor does not require any lubrication, guaranteeing the purity of the compressed gas. This makes it particularly suitable for compressing and transporting flammable, explosive, toxic, and high-purity gases. Moreover, it is also highly effective for bottling purposes.

The High Pressure Air-Cooled Ammonia Compressor Propylene Ethylene Diaphragm Compressor Gas Compressor is a reliable solution for industries that demand safe and efficient gas compression and transportation. Its advanced features and superior performance make it a preferred choice for applications that require high-quality compressed gas.

Other Products Offered by EVER-POWER GROUP

EVER-POWER GROUP is an industry-leading provider of various products for industrial use. In addition to the High Pressure Air-Cooled Ammonia Compressor Propylene Ethylene Diaphragm Compressor Gas Compressor, EVER-POWER GROUP offers a wide range of gearboxes, power output shafts, sprockets, fluid couplings, worm gear reducers, gears and racks, roller chains, pulleys and pulleys, planetary gearboxes, timing pulleys, bushings, and more. These products are designed to meet the diverse needs of different industries and are known for their high quality, competitive prices, and exceptional customer service.

EVER-POWER GROUP is committed to delivering customized solutions to its customers. Whether you require customized drawings or samples, our team is ready to assist you. We prioritize customer satisfaction and strive to provide products that meet your specific requirements.

Frequently Asked Questions (FAQs)

1. What makes the High Pressure Air-Cooled Ammonia Compressor Propylene Ethylene Diaphragm Compressor Gas Compressor stand out from other compressors?

The High Pressure Air-Cooled Ammonia Compressor Propylene Ethylene Diaphragm Compressor Gas Compressor stands out due to its unique diaphragm design, which allows for a large compression ratio and wide pressure range. It also ensures the purity of compressed gas without the need for lubrication.

2. Can this compressor be used for compressing high-purity gases?

Absolutely! The High Pressure Air-Cooled Ammonia Compressor Propylene Ethylene Diaphragm Compressor Gas Compressor is specifically designed for compressing high-purity gases, making it a reliable choice for industries requiring strict gas purity standards.

3. Is this compressor suitable for industries working with flammable and explosive gases?

Yes, the High Pressure Air-Cooled Ammonia Compressor Propylene Ethylene Diaphragm Compressor Gas Compressor is particularly suitable for industries working with flammable and explosive gases. Its excellent sealing characteristics and safe operation ensure the utmost security.

4. Can I customize my order and request specific product features?

Absolutely! At EVER-POWER GROUP, we offer customized solutions to meet your specific requirements. You can provide us with your drawings or samples, and our team will work closely with you to deliver the product tailored to your needs.

5. What industries can benefit from using the High Pressure Air-Cooled Ammonia Compressor Propylene Ethylene Diaphragm Compressor Gas Compressor?

The High Pressure Air-Cooled Ammonia Compressor Propylene Ethylene Diaphragm Compressor Gas Compressor is versatile and can benefit various industries such as chemical, oil and gas, pharmaceutical, food processing, and many more. Its reliable performance and efficient gas compression make it an indispensable tool in these industries.

Introduction

Disclaimer: The content of this page is sourced from the internet and is meant solely as a reference for product selection. Our products are replacement parts and not original spare parts. We are not the holder of the original trademarks mentioned in this content. Our replacement parts are designed to be compatible with original spare parts, but if you require original spare parts, please contact the respective manufacturers for purchasing.

Performance Characteristics of Ethylene Compressor

1. High Efficiency

Ethylene compressors are known for their high efficiency, ensuring optimal performance in various applications. The compressor’s design and engineering enable it to handle ethylene gas compression with maximum efficiency, resulting in improved productivity and cost-effectiveness.

2. Reliable Operation

Ethylene compressors are built to ensure reliable operation even in demanding conditions. Their robust construction, advanced control systems, and state-of-the-art technologies contribute to their ability to withstand high pressures, temperature variations, and operational challenges.

3. Enhanced Safety

Safety is a paramount consideration when it comes to ethylene compression. Ethylene compressors are designed with multiple safety features, such as pressure relief valves, temperature sensors, and advanced monitoring systems, to prevent accidents and ensure the well-being of operators and surrounding environments.

4. Versatile Applications

Ethylene compressors find wide-ranging applications in various industries. From ethylene production and polymerization processes to ethylene storage and transportation, chemical synthesis, and polyethylene production, these compressors play a crucial role in ensuring smooth operations and maintaining product quality.

Types and Characteristics of Ethylene Compressor

1. Reciprocating Compressors

Reciprocating compressors are commonly used in ethylene compression due to their ability to handle high-pressure gas. These compressors offer excellent efficiency, reliability, and control over the compression process, making them suitable for a wide range of applications.

2. Screw Compressors

Screw compressors are known for their continuous compression process, making them ideal for ethylene compression. These compressors offer high volume flow rates, low vibrations, and compact designs, making them well-suited for both industrial and commercial applications.

3. Centrifugal Compressors

Centrifugal compressors are suitable for large-scale ethylene compression, offering high flow rates and low maintenance requirements. These compressors are highly efficient and often used in industrial settings where there is a need for substantial gas compression.

Advantages of Ethylene Compressor Made of Different Materials

1. Stainless Steel Compressors

  • Excellent corrosion resistance, ensuring long-term durability.
  • High strength and reliability for demanding applications.
  • Suitable for handling high temperatures and harsh operating conditions.

2. Carbon Steel Compressors

  • Cost-effective option without compromising performance.
  • Durable and resistant to wear and tear.
  • Widely available and easy to maintain.

3. Aluminum Compressors

  • Lightweight construction for easy installation and transportation.
  • Good heat dissipation properties, preventing overheating.
  • Corrosion-resistant, suitable for certain applications.

Application of Ethylene Compressor

Ethylene compressors play a vital role in various industries:

Ethylene Production

Ethylene compressors are crucial for the production of ethylene, ensuring efficient compression during the manufacturing process. They contribute to the overall productivity and quality of the ethylene production.

Polymerization

In polymerization processes, ethylene compressors are used to compress and transport ethylene gas for the production of various polymers. The compressors ensure the required pressure and flow rates, enabling the polymerization process to occur efficiently.

Ethylene Storage and Transportation

Ethylene compressors are employed during the storage and transportation of ethylene gas. They help maintain the desired pressure levels and prevent any leakage, ensuring the safe and efficient transfer of ethylene from one location to another.

Chemical Synthesis

In chemical synthesis applications, ethylene compressors are used to compress and transport ethylene gas for various chemical reactions. They provide the necessary pressure and flow rates required for precise and controlled chemical synthesis.

Polyethylene Production

Ethylene compressors are integral to the production of polyethylene, a widely used plastic. They ensure the efficient compression and transportation of ethylene gas, contributing to the overall quality and productivity of polyethylene manufacturing.

Future Development Trends and Opportunities

The future of ethylene compressor products is promising, with several development trends and opportunities:

1. Advanced Technologies

The integration of advanced technologies, such as IoT (Internet of Things) and automation, will enhance the efficiency, control, and monitoring capabilities of ethylene compressors, leading to improved performance and reduced maintenance requirements.

2. Energy Efficiency

The development of energy-efficient ethylene compressors will be a key focus, as industries strive to reduce energy consumption and minimize their environmental impact. Innovations in compressor design and materials will contribute to achieving higher energy efficiency.

3. Enhanced Safety Features

Continued advancements in safety features will ensure the highest level of operator and environmental safety. Ethylene compressors will incorporate advanced monitoring systems, real-time data analysis, and predictive maintenance capabilities to prevent accidents and improve overall safety.

4. Industry-Specific Customization

The future will witness a growing demand for ethylene compressors tailored to specific industry requirements. Customization options, including pressure range, volume flow rates, materials, and control systems, will enable efficient and optimized ethylene compression in various sectors.

Choosing a Suitable Ethylene Compressor

When choosing an ethylene compressor, consider the following aspects:

1. Clear Requirements

Identify your specific ethylene compression requirements, including pressure range, volume flow rates, temperature range, and any industry-specific needs. This will help narrow down the options and ensure the chosen compressor meets your exact demands.

2. Material Selection

Based on the operating conditions, consider the material of the compressor that best suits your requirements. Stainless steel, carbon steel, or aluminum options may be suitable, depending on factors such as corrosion resistance, strength, and weight considerations.

3. Design Optimization

Look for compressors with optimized designs that offer high efficiency, low vibration, and noise levels. Features such as advanced cooling systems, compact designs, and ease of maintenance should also be considered to ensure long-term performance and ease of operation.

4. Suppliers and After-Sales Service

Choose reputable suppliers who provide reliable ethylene compressors and offer comprehensive after-sales service. This ensures access to technical support, spare parts, and maintenance assistance, guaranteeing the smooth operation of your ethylene compression system.

5. Cost-Effectiveness

Consider the overall cost-effectiveness of the ethylene compressor, taking into account not only the initial purchase price but also energy consumption, maintenance requirements, and long-term reliability. A balance between upfront investment and long-term operational costs should be achieved.

6. Quality Control

Ensure that the chosen ethylene compressor meets industry standards and undergoes rigorous quality control processes. Look for certifications and accreditations that reflect the manufacturer’s commitment to delivering high-quality and reliable products.

Author: Dream

China Hot selling MW-9.8/0.2-19.2 Propylene Booster Ethylene Propylene Special Compressor Provides Air Cooling, Water Cooling, Air and Water Mixed Cooling air compressor lowes

China Hot Selling MW-9.8/0.2-19.2 Propylene Booster Ethylene Propylene Special Compressor Provides Air Cooling, Water Cooling, Air and Water Mixed Cooling Air Compressor Lowes

Product Description

The MW-9.8/0.2-19.2 Propylene Booster Ethylene Propylene Special Compressor is a cutting-edge piston compressor unit manufactured using the advanced product technology of Mannes Mandermarg Company in Germany. This compressor is known for its low noise, low vibration, compact structure, smooth operation, safety and reliability, and high level of automation. It can be equipped with a data-driven remote display and control system according to customer requirements. The compressor also features alarm and shutdown functions for low oil pressure, low water pressure, high temperature, low inlet pressure, and high exhaust pressure, ensuring reliable operation.

Product Application

This compressor is mainly used for the pressurized transmission of natural gas into the pipeline network, including natural pipeline gas extraction, combustible gas recovery tank filling, and pressurized gas transportation in various industries such as pharmaceutical, brewing, chemical, food, and machine manufacturing. It is also used for dust removal of parts in the machine manufacturing industry.

Product Features

  • This compressor series is an advanced piston compressor unit produced using German technology.
  • Low noise, low vibration, compact structure, smooth operation, safety and reliability, and high automation level.
  • Equipped with alarm and shutdown functions for low oil pressure, low water pressure, high temperature, low inlet pressure, and high exhaust pressure.
  • Data-driven remote display and control system can be configured according to customer requirements.

Structure Introduction

The compressor unit consists of a compressor host, electric motor, coupling, flywheel, pipeline system, cooling system, electrical equipment, and auxiliary equipment.

Reference Technical Parameters and Specifications

Introduction

Disclaimer: The content of this page is sourced from the internet and is meant solely as a reference for product selection. Our products are replacement parts and not original spare parts. We are not the holder of the original trademarks mentioned in this content. Our replacement parts are designed to be compatible with original spare parts, but if you require original spare parts, please contact the respective manufacturers for purchasing.

Performance Characteristics of Ethylene Compressor

1. High Efficiency

Ethylene compressors are known for their high efficiency, ensuring optimal performance in various applications. The compressor’s design and engineering enable it to handle ethylene gas compression with maximum efficiency, resulting in improved productivity and cost-effectiveness.

2. Reliable Operation

Ethylene compressors are built to ensure reliable operation even in demanding conditions. Their robust construction, advanced control systems, and state-of-the-art technologies contribute to their ability to withstand high pressures, temperature variations, and operational challenges.

3. Enhanced Safety

Safety is a paramount consideration when it comes to ethylene compression. Ethylene compressors are designed with multiple safety features, such as pressure relief valves, temperature sensors, and advanced monitoring systems, to prevent accidents and ensure the well-being of operators and surrounding environments.

4. Versatile Applications

Ethylene compressors find wide-ranging applications in various industries. From ethylene production and polymerization processes to ethylene storage and transportation, chemical synthesis, and polyethylene production, these compressors play a crucial role in ensuring smooth operations and maintaining product quality.

Types and Characteristics of Ethylene Compressor

1. Reciprocating Compressors

Reciprocating compressors are commonly used in ethylene compression due to their ability to handle high-pressure gas. These compressors offer excellent efficiency, reliability, and control over the compression process, making them suitable for a wide range of applications.

2. Screw Compressors

Screw compressors are known for their continuous compression process, making them ideal for ethylene compression. These compressors offer high volume flow rates, low vibrations, and compact designs, making them well-suited for both industrial and commercial applications.

3. Centrifugal Compressors

Centrifugal compressors are suitable for large-scale ethylene compression, offering high flow rates and low maintenance requirements. These compressors are highly efficient and often used in industrial settings where there is a need for substantial gas compression.

Advantages of Ethylene Compressor Made of Different Materials

1. Stainless Steel Compressors

  • Excellent corrosion resistance, ensuring long-term durability.
  • High strength and reliability for demanding applications.
  • Suitable for handling high temperatures and harsh operating conditions.

2. Carbon Steel Compressors

  • Cost-effective option without compromising performance.
  • Durable and resistant to wear and tear.
  • Widely available and easy to maintain.

3. Aluminum Compressors

  • Lightweight construction for easy installation and transportation.
  • Good heat dissipation properties, preventing overheating.
  • Corrosion-resistant, suitable for certain applications.

Application of Ethylene Compressor

Ethylene compressors play a vital role in various industries:

Ethylene Production

Ethylene compressors are crucial for the production of ethylene, ensuring efficient compression during the manufacturing process. They contribute to the overall productivity and quality of the ethylene production.

Polymerization

In polymerization processes, ethylene compressors are used to compress and transport ethylene gas for the production of various polymers. The compressors ensure the required pressure and flow rates, enabling the polymerization process to occur efficiently.

Ethylene Storage and Transportation

Ethylene compressors are employed during the storage and transportation of ethylene gas. They help maintain the desired pressure levels and prevent any leakage, ensuring the safe and efficient transfer of ethylene from one location to another.

Chemical Synthesis

In chemical synthesis applications, ethylene compressors are used to compress and transport ethylene gas for various chemical reactions. They provide the necessary pressure and flow rates required for precise and controlled chemical synthesis.

Polyethylene Production

Ethylene compressors are integral to the production of polyethylene, a widely used plastic. They ensure the efficient compression and transportation of ethylene gas, contributing to the overall quality and productivity of polyethylene manufacturing.

Future Development Trends and Opportunities

The future of ethylene compressor products is promising, with several development trends and opportunities:

1. Advanced Technologies

The integration of advanced technologies, such as IoT (Internet of Things) and automation, will enhance the efficiency, control, and monitoring capabilities of ethylene compressors, leading to improved performance and reduced maintenance requirements.

2. Energy Efficiency

The development of energy-efficient ethylene compressors will be a key focus, as industries strive to reduce energy consumption and minimize their environmental impact. Innovations in compressor design and materials will contribute to achieving higher energy efficiency.

3. Enhanced Safety Features

Continued advancements in safety features will ensure the highest level of operator and environmental safety. Ethylene compressors will incorporate advanced monitoring systems, real-time data analysis, and predictive maintenance capabilities to prevent accidents and improve overall safety.

4. Industry-Specific Customization

The future will witness a growing demand for ethylene compressors tailored to specific industry requirements. Customization options, including pressure range, volume flow rates, materials, and control systems, will enable efficient and optimized ethylene compression in various sectors.

Choosing a Suitable Ethylene Compressor

When choosing an ethylene compressor, consider the following aspects:

1. Clear Requirements

Identify your specific ethylene compression requirements, including pressure range, volume flow rates, temperature range, and any industry-specific needs. This will help narrow down the options and ensure the chosen compressor meets your exact demands.

2. Material Selection

Based on the operating conditions, consider the material of the compressor that best suits your requirements. Stainless steel, carbon steel, or aluminum options may be suitable, depending on factors such as corrosion resistance, strength, and weight considerations.

3. Design Optimization

Look for compressors with optimized designs that offer high efficiency, low vibration, and noise levels. Features such as advanced cooling systems, compact designs, and ease of maintenance should also be considered to ensure long-term performance and ease of operation.

4. Suppliers and After-Sales Service

Choose reputable suppliers who provide reliable ethylene compressors and offer comprehensive after-sales service. This ensures access to technical support, spare parts, and maintenance assistance, guaranteeing the smooth operation of your ethylene compression system.

5. Cost-Effectiveness

Consider the overall cost-effectiveness of the ethylene compressor, taking into account not only the initial purchase price but also energy consumption, maintenance requirements, and long-term reliability. A balance between upfront investment and long-term operational costs should be achieved.

6. Quality Control

Ensure that the chosen ethylene compressor meets industry standards and undergoes rigorous quality control processes. Look for certifications and accreditations that reflect the manufacturer’s commitment to delivering high-quality and reliable products.

Author: Dream

China best Zw-0.4/6-10 Explosion-Proof Bog Compressor LNG Ethylene Ammonia Piston Compressor with Best Sales

China Best Zw-0.4/6-10 Explosion-Proof Bog Compressor LNG Ethylene Ammonia Piston Compressor with Best Sales

Product Description

A piston compressor is a highly efficient gas delivery system that utilizes piston reciprocating motion to pressurize and deliver gas. It consists of a working chamber, transmission parts, body, and auxiliary components. The working chamber directly compresses the gas, while the piston, driven by the piston rod, moves back and forth in the cylinder. As the piston moves, the volume of the working chamber on each side changes alternately. When the volume decreases on one side, the gas is discharged through the valve, resulting in increased pressure. On the other side, as the volume increases, the reduced air pressure allows the valve to absorb more gas.

This piston compressor, the Zw-0.4/6-10 Explosion-Proof Bog Compressor LNG Ethylene Ammonia Piston Compressor, offers exceptional performance and reliability. Its robust design ensures a smooth and efficient gas compression process, making it suitable for various applications. With its explosion-proof features, it guarantees safe operation even in hazardous environments.

Highlights of the Zw-0.4/6-10 Explosion-Proof Bog Compressor:

  • Superior gas compression performance
  • Reliable and durable design
  • Explosion-proof for safe operation in hazardous environments
  • Suitable for LNG, ethylene, ammonia, and other gases
  • Efficient and energy-saving operation

With its outstanding features and excellent sales record, the Zw-0.4/6-10 Explosion-Proof Bog Compressor has become one of the best-selling piston compressors in China. This compressor is manufactured to the highest standards, ensuring top-notch quality and longevity. Its versatility allows it to meet the demands of various industries, making it an ideal choice for those seeking reliable and efficient gas compression solutions.

EVER-POWER GROUP – Your Trusted Industrial Products Supplier

EVER-POWER GROUP is a reputable supplier of high-quality industrial products. We offer a wide range of products, including agricultural gearboxes, power output shafts, sprockets, fluid couplings, worm gear reducers, gears and racks, roller chains, pulleys and pulleys, planetary gearboxes, timing pulleys, bushings, and more. Our products are designed to meet the rigorous demands of industrial applications, providing exceptional performance and durability.

At EVER-POWER GROUP, we prioritize customer satisfaction and strive to deliver products that exceed expectations. Our commitment to offering competitive prices and excellent services has earned us the trust and loyalty of our customers. We welcome customization requests based on drawings and samples, ensuring that our products meet your specific requirements.

Frequently Asked Questions (FAQs)

1. What are the key features of the Zw-0.4/6-10 Explosion-Proof Bog Compressor?

The Zw-0.4/6-10 Explosion-Proof Bog Compressor offers superior gas compression performance, a durable design, and explosion-proof features for safe operation in hazardous environments. It is suitable for various gases, including LNG, ethylene, and ammonia, and ensures energy-efficient operation.

2. Why is the Zw-0.4/6-10 Explosion-Proof Bog Compressor popular in China?

The Zw-0.4/6-10 Explosion-Proof Bog Compressor has gained popularity in China due to its exceptional performance and reliability. Its robust design and efficient gas compression capabilities make it a top choice for various industries.

3. Can the Zw-0.4/6-10 Explosion-Proof Bog Compressor be customized?

Yes, at EVER-POWER GROUP, we welcome customization requests based on drawings and samples. We strive to meet our customers’ specific requirements and provide tailored solutions.

4. What industries can benefit from the Zw-0.4/6-10 Explosion-Proof Bog Compressor?

The Zw-0.4/6-10 Explosion-Proof Bog Compressor is versatile and can benefit industries such as oil and gas, chemical, petrochemical, and manufacturing. Its reliable and efficient gas compression capabilities make it suitable for various applications within these sectors.

5. How does EVER-POWER GROUP ensure the quality of their industrial products?

At EVER-POWER GROUP, we adhere to stringent quality control measures throughout the manufacturing process. Our products undergo rigorous testing to ensure they meet the highest standards of performance, reliability, and durability.

Introduction

Disclaimer: The content of this page is sourced from the internet and is meant solely as a reference for product selection. Our products are replacement parts and not original spare parts. We are not the holder of the original trademarks mentioned in this content. Our replacement parts are designed to be compatible with original spare parts, but if you require original spare parts, please contact the respective manufacturers for purchasing.

Performance Characteristics of Ethylene Compressor

1. High Efficiency

Ethylene compressors are known for their high efficiency, ensuring optimal performance in various applications. The compressor’s design and engineering enable it to handle ethylene gas compression with maximum efficiency, resulting in improved productivity and cost-effectiveness.

2. Reliable Operation

Ethylene compressors are built to ensure reliable operation even in demanding conditions. Their robust construction, advanced control systems, and state-of-the-art technologies contribute to their ability to withstand high pressures, temperature variations, and operational challenges.

3. Enhanced Safety

Safety is a paramount consideration when it comes to ethylene compression. Ethylene compressors are designed with multiple safety features, such as pressure relief valves, temperature sensors, and advanced monitoring systems, to prevent accidents and ensure the well-being of operators and surrounding environments.

4. Versatile Applications

Ethylene compressors find wide-ranging applications in various industries. From ethylene production and polymerization processes to ethylene storage and transportation, chemical synthesis, and polyethylene production, these compressors play a crucial role in ensuring smooth operations and maintaining product quality.

Types and Characteristics of Ethylene Compressor

1. Reciprocating Compressors

Reciprocating compressors are commonly used in ethylene compression due to their ability to handle high-pressure gas. These compressors offer excellent efficiency, reliability, and control over the compression process, making them suitable for a wide range of applications.

2. Screw Compressors

Screw compressors are known for their continuous compression process, making them ideal for ethylene compression. These compressors offer high volume flow rates, low vibrations, and compact designs, making them well-suited for both industrial and commercial applications.

3. Centrifugal Compressors

Centrifugal compressors are suitable for large-scale ethylene compression, offering high flow rates and low maintenance requirements. These compressors are highly efficient and often used in industrial settings where there is a need for substantial gas compression.

Advantages of Ethylene Compressor Made of Different Materials

1. Stainless Steel Compressors

  • Excellent corrosion resistance, ensuring long-term durability.
  • High strength and reliability for demanding applications.
  • Suitable for handling high temperatures and harsh operating conditions.

2. Carbon Steel Compressors

  • Cost-effective option without compromising performance.
  • Durable and resistant to wear and tear.
  • Widely available and easy to maintain.

3. Aluminum Compressors

  • Lightweight construction for easy installation and transportation.
  • Good heat dissipation properties, preventing overheating.
  • Corrosion-resistant, suitable for certain applications.

Application of Ethylene Compressor

Ethylene compressors play a vital role in various industries:

Ethylene Production

Ethylene compressors are crucial for the production of ethylene, ensuring efficient compression during the manufacturing process. They contribute to the overall productivity and quality of the ethylene production.

Polymerization

In polymerization processes, ethylene compressors are used to compress and transport ethylene gas for the production of various polymers. The compressors ensure the required pressure and flow rates, enabling the polymerization process to occur efficiently.

Ethylene Storage and Transportation

Ethylene compressors are employed during the storage and transportation of ethylene gas. They help maintain the desired pressure levels and prevent any leakage, ensuring the safe and efficient transfer of ethylene from one location to another.

Chemical Synthesis

In chemical synthesis applications, ethylene compressors are used to compress and transport ethylene gas for various chemical reactions. They provide the necessary pressure and flow rates required for precise and controlled chemical synthesis.

Polyethylene Production

Ethylene compressors are integral to the production of polyethylene, a widely used plastic. They ensure the efficient compression and transportation of ethylene gas, contributing to the overall quality and productivity of polyethylene manufacturing.

Future Development Trends and Opportunities

The future of ethylene compressor products is promising, with several development trends and opportunities:

1. Advanced Technologies

The integration of advanced technologies, such as IoT (Internet of Things) and automation, will enhance the efficiency, control, and monitoring capabilities of ethylene compressors, leading to improved performance and reduced maintenance requirements.

2. Energy Efficiency

The development of energy-efficient ethylene compressors will be a key focus, as industries strive to reduce energy consumption and minimize their environmental impact. Innovations in compressor design and materials will contribute to achieving higher energy efficiency.

3. Enhanced Safety Features

Continued advancements in safety features will ensure the highest level of operator and environmental safety. Ethylene compressors will incorporate advanced monitoring systems, real-time data analysis, and predictive maintenance capabilities to prevent accidents and improve overall safety.

4. Industry-Specific Customization

The future will witness a growing demand for ethylene compressors tailored to specific industry requirements. Customization options, including pressure range, volume flow rates, materials, and control systems, will enable efficient and optimized ethylene compression in various sectors.

Choosing a Suitable Ethylene Compressor

When choosing an ethylene compressor, consider the following aspects:

1. Clear Requirements

Identify your specific ethylene compression requirements, including pressure range, volume flow rates, temperature range, and any industry-specific needs. This will help narrow down the options and ensure the chosen compressor meets your exact demands.

2. Material Selection

Based on the operating conditions, consider the material of the compressor that best suits your requirements. Stainless steel, carbon steel, or aluminum options may be suitable, depending on factors such as corrosion resistance, strength, and weight considerations.

3. Design Optimization

Look for compressors with optimized designs that offer high efficiency, low vibration, and noise levels. Features such as advanced cooling systems, compact designs, and ease of maintenance should also be considered to ensure long-term performance and ease of operation.

4. Suppliers and After-Sales Service

Choose reputable suppliers who provide reliable ethylene compressors and offer comprehensive after-sales service. This ensures access to technical support, spare parts, and maintenance assistance, guaranteeing the smooth operation of your ethylene compression system.

5. Cost-Effectiveness

Consider the overall cost-effectiveness of the ethylene compressor, taking into account not only the initial purchase price but also energy consumption, maintenance requirements, and long-term reliability. A balance between upfront investment and long-term operational costs should be achieved.

6. Quality Control

Ensure that the chosen ethylene compressor meets industry standards and undergoes rigorous quality control processes. Look for certifications and accreditations that reflect the manufacturer’s commitment to delivering high-quality and reliable products.

Author: Dream

China Professional 350bar High-Pressure Explosion-Proof Ethylene Hydrogen Compressor Diaphragm Compressor air compressor for car

China Professional 350bar High-Pressure Explosion-Proof Ethylene Hydrogen Compressor Diaphragm Compressor air compressor for car

Product Description

The China Professional 350bar High-Pressure Explosion-Proof Ethylene Hydrogen Compressor Diaphragm Compressor air compressor for car is a reciprocating completely oil-free diaphragm compressor designed for various industrial applications. It is a reliable and efficient compressor that offers outstanding performance and durability.

Process Principle

The diaphragm compressor operates by completely separating the gas from the hydraulic oil system, ensuring the purity of the gas and preventing any pollution. The advanced manufacturing technology and accurate membrane cavity design ensure a long service life for the diaphragm. The metal diaphragm group effectively separates the process gas from the hydraulic oil and lubricating oil parts, ensuring the purity of the gas.

Main Structure

The diaphragm compressor is composed of a motor, base, crankcase, crankshaft linkage mechanism, cylinder components, crankshaft connecting rod, piston, oil and gas pipeline, electric control system, and other accessories. Its well-designed structure ensures excellent performance and efficient operation.

Gas Media Type

This compressor can handle a wide range of gases including ammonia, propylene, nitrogen, oxygen, helium, hydrogen chloride, argon, hydrogen sulfide, hydrogen bromide, ethylene, acetylene, and more. It is suitable for various applications, such as nitrogen diaphragm compression, bottle filling, and oxygen diaphragm compression.

Advantages

1. Good Sealing Performance: The diaphragm compressor provides excellent sealing performance. It does not require lubrication, ensuring no pollution during the compression process. It is especially suitable for high purity, corrosive, toxic, inflammable, and explosive gases. The sealing effect of the membrane head is superior due to the inlaid double O-ring.

2. Cylinder with Good Heat Dissipation Performance: The working cylinder of the diaphragm compressor has excellent heat dissipation performance, allowing for close-to-isothermal compression. This enables higher compression ratios and makes it suitable for compressing high-pressure gases.

3. Extended Service Life: The diaphragm compressor features a low compressor speed and a prolonged service life for vulnerable parts. The new type of diaphragm cavity curve improves the volume efficiency and adopts a special heat treatment method for the diaphragm, ensuring a longer lifespan for the compressor.

4. High Efficiency Cooler: The compressor is equipped with a high-efficiency cooler, which keeps the machine running at a low temperature while maintaining high efficiency. This prolongs the service life of lubricating oil, O-rings, and valve springs, making it energy-saving and efficient.

5. Advanced Diaphragm Rupture Alarm Structure: The diaphragm compressor comes with an advanced and reliable diaphragm rupture alarm structure. The diaphragm installation is easy to replace and does not require a specific directionality.

6. Convenient and Portable: The parts and components of the compressor are concentrated on a skid-mounted chassis, making it easy for transportation, installation, and management.

Other Product Offerings

EVER-POWER GROUP specializes in providing various products for industrial use. Our offerings include agricultural gearboxes, power output shafts, sprockets, fluid couplings, worm gear reducers, gears and racks, roller chains, pulleys and pulleys, planetary gearboxes, timing pulleys, bushings, and more. We offer high-quality products at competitive prices and provide excellent customer service. Customization of drawings and samples is available upon request.

FAQs (Frequently Asked Questions)

1. What gases can the China Professional 350bar High-Pressure Explosion-Proof Ethylene Hydrogen Compressor handle?

The compressor can handle gases such as ammonia, propylene, nitrogen, oxygen, helium, hydrogen chloride, argon, hydrogen sulfide, hydrogen bromide, ethylene, acetylene, and more.

2. Does the diaphragm compressor require lubrication?

No, the diaphragm compressor does not require lubrication. It operates without any contact between the compression medium and lubricant, ensuring no pollution during the compression process.

3. What are the advantages of the diaphragm compressor

Introduction

Disclaimer: The content of this page is sourced from the internet and is meant solely as a reference for product selection. Our products are replacement parts and not original spare parts. We are not the holder of the original trademarks mentioned in this content. Our replacement parts are designed to be compatible with original spare parts, but if you require original spare parts, please contact the respective manufacturers for purchasing.

Performance Characteristics of Ethylene Compressor

1. High Efficiency

Ethylene compressors are known for their high efficiency, ensuring optimal performance in various applications. The compressor’s design and engineering enable it to handle ethylene gas compression with maximum efficiency, resulting in improved productivity and cost-effectiveness.

2. Reliable Operation

Ethylene compressors are built to ensure reliable operation even in demanding conditions. Their robust construction, advanced control systems, and state-of-the-art technologies contribute to their ability to withstand high pressures, temperature variations, and operational challenges.

3. Enhanced Safety

Safety is a paramount consideration when it comes to ethylene compression. Ethylene compressors are designed with multiple safety features, such as pressure relief valves, temperature sensors, and advanced monitoring systems, to prevent accidents and ensure the well-being of operators and surrounding environments.

4. Versatile Applications

Ethylene compressors find wide-ranging applications in various industries. From ethylene production and polymerization processes to ethylene storage and transportation, chemical synthesis, and polyethylene production, these compressors play a crucial role in ensuring smooth operations and maintaining product quality.

Types and Characteristics of Ethylene Compressor

1. Reciprocating Compressors

Reciprocating compressors are commonly used in ethylene compression due to their ability to handle high-pressure gas. These compressors offer excellent efficiency, reliability, and control over the compression process, making them suitable for a wide range of applications.

2. Screw Compressors

Screw compressors are known for their continuous compression process, making them ideal for ethylene compression. These compressors offer high volume flow rates, low vibrations, and compact designs, making them well-suited for both industrial and commercial applications.

3. Centrifugal Compressors

Centrifugal compressors are suitable for large-scale ethylene compression, offering high flow rates and low maintenance requirements. These compressors are highly efficient and often used in industrial settings where there is a need for substantial gas compression.

Advantages of Ethylene Compressor Made of Different Materials

1. Stainless Steel Compressors

  • Excellent corrosion resistance, ensuring long-term durability.
  • High strength and reliability for demanding applications.
  • Suitable for handling high temperatures and harsh operating conditions.

2. Carbon Steel Compressors

  • Cost-effective option without compromising performance.
  • Durable and resistant to wear and tear.
  • Widely available and easy to maintain.

3. Aluminum Compressors

  • Lightweight construction for easy installation and transportation.
  • Good heat dissipation properties, preventing overheating.
  • Corrosion-resistant, suitable for certain applications.

Application of Ethylene Compressor

Ethylene compressors play a vital role in various industries:

Ethylene Production

Ethylene compressors are crucial for the production of ethylene, ensuring efficient compression during the manufacturing process. They contribute to the overall productivity and quality of the ethylene production.

Polymerization

In polymerization processes, ethylene compressors are used to compress and transport ethylene gas for the production of various polymers. The compressors ensure the required pressure and flow rates, enabling the polymerization process to occur efficiently.

Ethylene Storage and Transportation

Ethylene compressors are employed during the storage and transportation of ethylene gas. They help maintain the desired pressure levels and prevent any leakage, ensuring the safe and efficient transfer of ethylene from one location to another.

Chemical Synthesis

In chemical synthesis applications, ethylene compressors are used to compress and transport ethylene gas for various chemical reactions. They provide the necessary pressure and flow rates required for precise and controlled chemical synthesis.

Polyethylene Production

Ethylene compressors are integral to the production of polyethylene, a widely used plastic. They ensure the efficient compression and transportation of ethylene gas, contributing to the overall quality and productivity of polyethylene manufacturing.

Future Development Trends and Opportunities

The future of ethylene compressor products is promising, with several development trends and opportunities:

1. Advanced Technologies

The integration of advanced technologies, such as IoT (Internet of Things) and automation, will enhance the efficiency, control, and monitoring capabilities of ethylene compressors, leading to improved performance and reduced maintenance requirements.

2. Energy Efficiency

The development of energy-efficient ethylene compressors will be a key focus, as industries strive to reduce energy consumption and minimize their environmental impact. Innovations in compressor design and materials will contribute to achieving higher energy efficiency.

3. Enhanced Safety Features

Continued advancements in safety features will ensure the highest level of operator and environmental safety. Ethylene compressors will incorporate advanced monitoring systems, real-time data analysis, and predictive maintenance capabilities to prevent accidents and improve overall safety.

4. Industry-Specific Customization

The future will witness a growing demand for ethylene compressors tailored to specific industry requirements. Customization options, including pressure range, volume flow rates, materials, and control systems, will enable efficient and optimized ethylene compression in various sectors.

Choosing a Suitable Ethylene Compressor

When choosing an ethylene compressor, consider the following aspects:

1. Clear Requirements

Identify your specific ethylene compression requirements, including pressure range, volume flow rates, temperature range, and any industry-specific needs. This will help narrow down the options and ensure the chosen compressor meets your exact demands.

2. Material Selection

Based on the operating conditions, consider the material of the compressor that best suits your requirements. Stainless steel, carbon steel, or aluminum options may be suitable, depending on factors such as corrosion resistance, strength, and weight considerations.

3. Design Optimization

Look for compressors with optimized designs that offer high efficiency, low vibration, and noise levels. Features such as advanced cooling systems, compact designs, and ease of maintenance should also be considered to ensure long-term performance and ease of operation.

4. Suppliers and After-Sales Service

Choose reputable suppliers who provide reliable ethylene compressors and offer comprehensive after-sales service. This ensures access to technical support, spare parts, and maintenance assistance, guaranteeing the smooth operation of your ethylene compression system.

5. Cost-Effectiveness

Consider the overall cost-effectiveness of the ethylene compressor, taking into account not only the initial purchase price but also energy consumption, maintenance requirements, and long-term reliability. A balance between upfront investment and long-term operational costs should be achieved.

6. Quality Control

Ensure that the chosen ethylene compressor meets industry standards and undergoes rigorous quality control processes. Look for certifications and accreditations that reflect the manufacturer’s commitment to delivering high-quality and reliable products.

Author: Dream

China Standard Piston Compressor Ethylene Compression Station Water Cooled Balanced Opposed Process Reciprocating Compressor air compressor for car

China Standard Piston Compressor: The Perfect Solution for Ethylene Compression Station

Product Description

The China Standard Piston Compressor is a reliable and efficient solution for ethylene compression stations. Designed with precision and engineered to perfection, this water-cooled balanced opposed process reciprocating compressor is an ideal choice for various industrial applications, including air compressor for cars.

Advanced Technology and Superior Performance

Our China Standard Piston Compressor incorporates advanced technology to deliver exceptional performance and unmatched reliability. With a focus on efficiency and durability, this compressor is designed to meet the demanding requirements of ethylene compression stations.

The piston compressor operates on the principle of piston reciprocating motion, ensuring efficient gas pressurization and delivery. It consists of a working chamber, transmission parts, body, and auxiliary components. The working chamber directly compresses the gas, while the piston, driven by the piston rod, undergoes reciprocating motion within the cylinder. As the piston moves, the volume of the working chamber alternates, resulting in gas compression and delivery.

Unparalleled Features and Benefits

Our China Standard Piston Compressor offers a range of features and benefits that make it a top choice for ethylene compression stations:

  • Highly efficient gas compression
  • Reliable and robust construction
  • Water-cooled design for optimal cooling performance
  • Balanced opposed process for smooth operation
  • Low maintenance requirements

With its exceptional performance and durability, this compressor ensures smooth and uninterrupted operation, allowing for seamless ethylene compression in various industrial settings.

Expand Your Industrial Solutions with EVER-POWER GROUP

EVER-POWER GROUP is a trusted supplier of various industrial products. In addition to the China Standard Piston Compressor, we offer a wide range of high-quality products designed for industrial use. Our product portfolio includes agricultural gearboxes, power output shafts, sprockets, fluid couplings, worm gear reducers, gears and racks, roller chains, pulleys, planetary gearboxes, timing pulleys, bushings, and more.

We are dedicated to providing our customers with the highest level of quality, competitive prices, and excellent service. At EVER-POWER GROUP, we welcome custom drawings and samples, allowing us to meet unique customer requirements and deliver tailored solutions.

Frequently Asked Questions (FAQs)

1. How does the China Standard Piston Compressor ensure efficient gas compression?

The China Standard Piston Compressor utilizes the principle of piston reciprocating motion to efficiently compress and deliver gas. The working chamber undergoes volume changes, resulting in the compression and delivery of the gas.

2. What are the key advantages of using a water-cooled balanced opposed process reciprocating compressor?

The water-cooled balanced opposed process reciprocating compressor offers superior cooling performance, ensuring optimal operation even in demanding industrial environments. It also promotes balanced operation, reducing vibrations and enhancing overall compressor efficiency.

3. Can the China Standard Piston Compressor be used in car air compressors?

Yes, the China Standard Piston Compressor is suitable for air compressor applications in cars. Its reliable performance and efficient gas compression make it an ideal choice for automotive air compressors.

4. What makes EVER-POWER GROUP a trusted supplier?

EVER-POWER GROUP is known for its commitment to delivering high-quality products, competitive prices, and excellent customer service. With a wide range of industrial products and the ability to customize solutions, we are the preferred choice for industrial needs.

5. How can I request a custom solution or inquire about specific products?

For custom solutions or inquiries about our products, including the China Standard Piston Compressor, please contact our team. We are ready to assist you and provide tailored solutions to meet your industrial requirements.

Introduction

Disclaimer: The content of this page is sourced from the internet and is meant solely as a reference for product selection. Our products are replacement parts and not original spare parts. We are not the holder of the original trademarks mentioned in this content. Our replacement parts are designed to be compatible with original spare parts, but if you require original spare parts, please contact the respective manufacturers for purchasing.

Performance Characteristics of Ethylene Compressor

1. High Efficiency

Ethylene compressors are known for their high efficiency, ensuring optimal performance in various applications. The compressor’s design and engineering enable it to handle ethylene gas compression with maximum efficiency, resulting in improved productivity and cost-effectiveness.

2. Reliable Operation

Ethylene compressors are built to ensure reliable operation even in demanding conditions. Their robust construction, advanced control systems, and state-of-the-art technologies contribute to their ability to withstand high pressures, temperature variations, and operational challenges.

3. Enhanced Safety

Safety is a paramount consideration when it comes to ethylene compression. Ethylene compressors are designed with multiple safety features, such as pressure relief valves, temperature sensors, and advanced monitoring systems, to prevent accidents and ensure the well-being of operators and surrounding environments.

4. Versatile Applications

Ethylene compressors find wide-ranging applications in various industries. From ethylene production and polymerization processes to ethylene storage and transportation, chemical synthesis, and polyethylene production, these compressors play a crucial role in ensuring smooth operations and maintaining product quality.

Types and Characteristics of Ethylene Compressor

1. Reciprocating Compressors

Reciprocating compressors are commonly used in ethylene compression due to their ability to handle high-pressure gas. These compressors offer excellent efficiency, reliability, and control over the compression process, making them suitable for a wide range of applications.

2. Screw Compressors

Screw compressors are known for their continuous compression process, making them ideal for ethylene compression. These compressors offer high volume flow rates, low vibrations, and compact designs, making them well-suited for both industrial and commercial applications.

3. Centrifugal Compressors

Centrifugal compressors are suitable for large-scale ethylene compression, offering high flow rates and low maintenance requirements. These compressors are highly efficient and often used in industrial settings where there is a need for substantial gas compression.

Advantages of Ethylene Compressor Made of Different Materials

1. Stainless Steel Compressors

  • Excellent corrosion resistance, ensuring long-term durability.
  • High strength and reliability for demanding applications.
  • Suitable for handling high temperatures and harsh operating conditions.

2. Carbon Steel Compressors

  • Cost-effective option without compromising performance.
  • Durable and resistant to wear and tear.
  • Widely available and easy to maintain.

3. Aluminum Compressors

  • Lightweight construction for easy installation and transportation.
  • Good heat dissipation properties, preventing overheating.
  • Corrosion-resistant, suitable for certain applications.

Application of Ethylene Compressor

Ethylene compressors play a vital role in various industries:

Ethylene Production

Ethylene compressors are crucial for the production of ethylene, ensuring efficient compression during the manufacturing process. They contribute to the overall productivity and quality of the ethylene production.

Polymerization

In polymerization processes, ethylene compressors are used to compress and transport ethylene gas for the production of various polymers. The compressors ensure the required pressure and flow rates, enabling the polymerization process to occur efficiently.

Ethylene Storage and Transportation

Ethylene compressors are employed during the storage and transportation of ethylene gas. They help maintain the desired pressure levels and prevent any leakage, ensuring the safe and efficient transfer of ethylene from one location to another.

Chemical Synthesis

In chemical synthesis applications, ethylene compressors are used to compress and transport ethylene gas for various chemical reactions. They provide the necessary pressure and flow rates required for precise and controlled chemical synthesis.

Polyethylene Production

Ethylene compressors are integral to the production of polyethylene, a widely used plastic. They ensure the efficient compression and transportation of ethylene gas, contributing to the overall quality and productivity of polyethylene manufacturing.

Future Development Trends and Opportunities

The future of ethylene compressor products is promising, with several development trends and opportunities:

1. Advanced Technologies

The integration of advanced technologies, such as IoT (Internet of Things) and automation, will enhance the efficiency, control, and monitoring capabilities of ethylene compressors, leading to improved performance and reduced maintenance requirements.

2. Energy Efficiency

The development of energy-efficient ethylene compressors will be a key focus, as industries strive to reduce energy consumption and minimize their environmental impact. Innovations in compressor design and materials will contribute to achieving higher energy efficiency.

3. Enhanced Safety Features

Continued advancements in safety features will ensure the highest level of operator and environmental safety. Ethylene compressors will incorporate advanced monitoring systems, real-time data analysis, and predictive maintenance capabilities to prevent accidents and improve overall safety.

4. Industry-Specific Customization

The future will witness a growing demand for ethylene compressors tailored to specific industry requirements. Customization options, including pressure range, volume flow rates, materials, and control systems, will enable efficient and optimized ethylene compression in various sectors.

Choosing a Suitable Ethylene Compressor

When choosing an ethylene compressor, consider the following aspects:

1. Clear Requirements

Identify your specific ethylene compression requirements, including pressure range, volume flow rates, temperature range, and any industry-specific needs. This will help narrow down the options and ensure the chosen compressor meets your exact demands.

2. Material Selection

Based on the operating conditions, consider the material of the compressor that best suits your requirements. Stainless steel, carbon steel, or aluminum options may be suitable, depending on factors such as corrosion resistance, strength, and weight considerations.

3. Design Optimization

Look for compressors with optimized designs that offer high efficiency, low vibration, and noise levels. Features such as advanced cooling systems, compact designs, and ease of maintenance should also be considered to ensure long-term performance and ease of operation.

4. Suppliers and After-Sales Service

Choose reputable suppliers who provide reliable ethylene compressors and offer comprehensive after-sales service. This ensures access to technical support, spare parts, and maintenance assistance, guaranteeing the smooth operation of your ethylene compression system.

5. Cost-Effectiveness

Consider the overall cost-effectiveness of the ethylene compressor, taking into account not only the initial purchase price but also energy consumption, maintenance requirements, and long-term reliability. A balance between upfront investment and long-term operational costs should be achieved.

6. Quality Control

Ensure that the chosen ethylene compressor meets industry standards and undergoes rigorous quality control processes. Look for certifications and accreditations that reflect the manufacturer’s commitment to delivering high-quality and reliable products.

Author: Dream

NO. MODEL Compressed Medium Flow Rate (Nm³/h) Inlet Pressure (MPa) Outlet Pressure (MPa) Rotating Speed (r/min) Motor Power (KW) Cooling Mode Overall Dimension (mm) Weight (Kg)
1 DW-14/(0-0.2)-25 Raw Gas 800 0-0.02 2.5